38 mm tuning cylinder made of aluminum with Nikasil coating and 50 cc displacement suitable for mopeds / mopeds with Sachs 503 2AL, AAL, 2BL, ABL CH engine.
The racing kit offers a performance increase over the entire speed range, with a focus on low speeds and torque. Compared to the original cylinder, this racing cylinder has had the seal removed and the intake enlarged. The overflow channels have also been enlarged and the piston skirt has been optimized to improve the timing. The exhaust port has also been designed at a favorable angle.
In addition to the piston, the scope of delivery also includes the matching piston rings, clips, pins, stud bolts and the required gaskets for the base, intake and cylinder head.
Cylinder material: Cast aluminum with Nikasil coating
Piston material: Cast aluminum
Bore: 38 mm
Capacity: 49 cm³
Ø Cylinder neck: 45.5 mm
Ø Exhaust inside: 18.5 mm
Ø Exhaust outside: 25.8 mm
Inlet hole spacing: 32 mm
Inlet thread: M6 x 0.8 mm
Ø inlet: 14 mm
Cylinder base hole pattern: 40 x 60 mm
Ø stud bolt hole: 6.9 mm
Cylinder cover hole pattern: 37 x 37 mm
Piston pin: 12 mm
Note: For Sachs 503 ABL engines, the engine housing may need to be ground out slightly in the area of the cylinder neck.
Matching cylinder heads and corresponding add-on parts for the replacement cylinder can be found in the accessories section.
Branded product from the manufacturer AKOA.
Details
| Nominal diameter | 38 mm |
| Manufacturer | AKOA |
| Material | Aluminum |
| Surface | nikasil-coated |
| Displacement | 50 ccm |
| Area of application | Standard |
| Crankshaft stroke | 43 mm |
| Hole spacing inlet | 32 mm |
| Ø cylinder neck | 45.5 mm |
| Ø Outlet outside | 25.8 mm |
| Ø outlet inside | 18.5 mm |
| Ø Inlet inside | 14 mm |
| Number of fixing points | 4 pcs |
| Thread inlet | M6x1 (standard thread) |
| Hole pattern [mm] | 40 x 60 / 37 x 37 |
| Ø piston pin (B) | 12 mm |
| Outlet type | clamped |
| Decompressor | No |
Suitable for the following models
| Sachs | 503 - AAL, ABL, 2AL / 2BL |
Accessories & related products
swiing 15 mm carburetor tuning camouflaged | Sachs 503
Nominal diameter: 15 mm · Width: 50 mm · Height: 95 mm · Manufacturer: swiing · Material: Aluminum · Carburetor type: SRE · Ø fuel hose connection: 6 mm · Ø Internal connection: 20 mm · Area of application: Tuning · Ø Inside entrance: 15 mm · Mounting type: Plug connection clamped · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Total length: 66 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Nozzle thread: M3.5 · Nozzle block: 2.17 · Camouflaged: Yes · Nozzle size: 62 · Clamping screw torque (max.): 4 N/m
EUR 90,10
swiing® revival carburetor 12 mm original | Sachs 503
Manufacturer: swiing® revival parts · Area of application: Standard · Material: Aluminum · Carburetor type: SRE · Total length: 65 mm · Width: 55 mm · Camouflaged: No · Nominal diameter: 12 mm · Height: 112 mm · Ø Inside entrance: 12 mm · Ø Internal connection: 20 mm · Mounting type: Plug connection clamped · Ø Output inside: 12 mm · Ø Air filter connection: 20 mm · Ø fuel hose connection: 5 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Nozzle thread: M3.5 · Nozzle size: 52 · Clamping screw torque (max.): 4 N/m · Pony spare part no.: A2442 · Sachs spare part no.: 0281 115 105
EUR 90,10
swiing® ingenious tuning set 40 mm | Sachs 503 (fan-cooled)
Manufacturer: GPO · Manufacturer: NGK · Manufacturer: swiing® ingenious parts · Camouflaged: No · Area of application: Tuning · Displacement: 55 ccm · Crankshaft stroke: 42 mm · Ø piston pin (B): 12 mm · Hole spacing inlet: 32 mm · Nominal diameter: 40 mm · Hole pattern [mm]: 60 x 40 · Outlet type: clamped · Decompressor: No
EUR 512,70
Not in stock
swiing® ingenious tuning cylinder 40 mm | Sachs 503
Nominal diameter: 40 mm · Manufacturer: swiing® ingenious parts · Material: Aluminum · Surface: sandblasted · Displacement: 55 ccm · Crankshaft stroke: 42 mm · Thread inlet: M6x1 (standard thread) · Hole spacing inlet: 32 mm · Ø piston pin (B): 12 mm · Outlet type: clamped · Number of fixing points: 4 pcs · Hole pattern [mm]: 60 x 40 / 37 x 37 · Decompressor: No · Camouflaged: No · Area of application: Tuning
EUR 191,50
Not in stock
swiing® ingenious tuning cylinder 38 mm | Sachs 503
Nominal diameter: 38 mm · Manufacturer: swiing® ingenious parts · Material: Aluminum · Surface: sandblasted · Displacement: 50 ccm · Crankshaft stroke: 42 mm · Thread inlet: M6x1 (standard thread) · Hole spacing inlet: 32 mm · Ø piston pin (B): 12 mm · Outlet type: clamped · Number of fixing points: 4 pcs · Hole pattern [mm]: 60 x 40 / 37 x 37 · Decompressor: No · Camouflaged: No · Area of application: Tuning
EUR 185,90
Not in stock
swiing® ingenious 15mm tuning set carburetor HG long | Sachs 503
Manufacturer: swiing · Camouflaged: No · Color: black · Area of application: Tuning · Width: 50 mm · Width: 68 mm · Carburetor type: SRE · Height: 52 mm · Height: 95 mm · Nominal diameter: 15 mm · Hole spacing inlet: 32 mm · Ø Internal connection: 20 mm · Ø Inside entrance: 15 mm · Mounting type: Flange · Mounting type: Plug connection clamped · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Nozzle thread: M3.5 · Nozzle block: 2.17 · Nozzle size: 62 · Clamping screw torque (max.): 4 N/m · Total length: 66 mm · Total length: 165 mm
EUR 191,50
AKOA 41 mm cylinder kit | Sachs 503 2AL, AAL, 2BL, ABL
Manufacturer: AKOA · Area of application: Tuning · Material: Aluminum · Surface: nikasil-coated · Crankshaft stroke: 43 mm · Displacement: 57 ccm · Ø cylinder neck: 45.5 mm · Ø Outlet outside: 25.8 mm · Nominal diameter: 41 mm · Number of fixing points: 4 pcs · Ø Inlet inside: 14 mm · Ø outlet inside: 18.5 mm · Hole spacing inlet: 32 mm · Ø piston pin (B): 12 mm · Thread inlet: M6x1 (standard thread) · Hole pattern [mm]: 40 x 60 / 37 x 37 · Decompressor: No · Outlet type: clamped
EUR 202,80
AKOA 40 mm cylinder kit | Sachs 503 2AL, AAL, 2BL, ABL
Manufacturer: AKOA · Area of application: Tuning · Material: Aluminum · Surface: nikasil-coated · Crankshaft stroke: 43 mm · Displacement: 54 ccm · Ø cylinder neck: 45.5 mm · Ø Outlet outside: 25.8 mm · Nominal diameter: 40 mm · Number of fixing points: 4 pcs · Ø Inlet inside: 14 mm · Ø outlet inside: 18.5 mm · Hole spacing inlet: 32 mm · Ø piston pin (B): 12 mm · Thread inlet: M6x1 (standard thread) · Hole pattern [mm]: 40 x 60 / 37 x 37 · Decompressor: No · Outlet type: clamped
EUR 191,50
BAD ASS Ø 41 mm "Pandora" tuning cylinder | Sachs 503, 50/2, 502
Manufacturer: BAD ASS · Material: Gray cast iron · Camouflaged: No · Area of application: Tuning · Surface: sandblasted · Displacement: 55 ccm · Crankshaft stroke: 42 mm · Ø piston pin (B): 12 mm · Nominal diameter: 41 mm · Ø cylinder neck: 45 mm · Ø Outlet outside: 26 mm · Ø Inlet inside: 19 mm · Ø outlet inside: 23 mm · Thread inlet: M6x1 (standard thread) · Number of fixing points: 4 pcs · Hole pattern [mm]: 40 x 60 / 37 x 37 · Outlet type: clamped · Hole spacing inlet: 32 mm
EUR 214,00
BAD ASS Ø 43 mm "Pandora" BigBore tuning cylinder | Sachs 503, 50/2, 502
Nominal diameter: 43 mm · Manufacturer: BAD ASS · Material: Gray cast iron · Surface: sandblasted · Displacement: 63 ccm · Crankshaft stroke: 42 mm · Ø cylinder neck: 45 mm · Ø Outlet outside: 26 mm · Ø outlet inside: 23 mm · Ø Inlet inside: 19 mm · Thread inlet: M6x1 (standard thread) · Hole spacing inlet: 32 mm · Ø piston pin (B): 12 mm · Outlet type: clamped · Number of fixing points: 4 pcs · Hole pattern [mm]: 40 x 60 / 37 x 37 · Camouflaged: No · Area of application: Tuning
EUR 360,60
Intake manifold 15 mm short | Sachs 503 2AL, 2BL
Ø inside: 15 mm · Area of application: Tuning · Material: Aluminum · Ø External connection: 20 mm · Total length: 50 mm · Number of fixing points: 2 pcs · Hole spacing inlet: 32 mm · Mounting type: Screws · Thread type: M6x1 (standard thread) · Sachs spare part no.: A2177
EUR 50,60
Moped fans like you also bought:
BING O-ring Bing SRE & 85, Ø 20 mm
Cord thickness: 1.4 mm · Manufacturer: BING · Ø inside: 17.2 mm · Number of components: 1 pcs · Place of use: Carburetor · Material: Rubber · Surface: raw · Color: black · Ø outside: 20 mm · Area of application: Standard · Pony spare part no.: A4281 · Sachs spare part no.: 0250 160 101
EUR 3,25
NSK BO15 shoulder ball bearing 15/40/10 (A4502)
Bearing type: Shoulder bearing · Bearing cage: Brass cage ball-guided · Stock number: BO15 · Inner ring width: 10 mm · Manufacturer: NSK · Material: Brass · Material: Steel · Area of application: Standard · Surface: blank · Width: 10 mm · Ø outside: 40 mm · Ø inside: 15 mm · Ball bearing closed: No · Pony spare part no.: A4502 · Sachs spare part no.: 0932 007 001
EUR 28,10
swiing® revival gearbox cover gasket | Sachs 503 AAL, ABL, AB, AC, ADV, 2AL, 2BL (A1888)
Width: 130 mm · Manufacturer: swiing® revival parts · Number of components: 1 pcs · Material: Sealing paper · Color: sand-colored · Thickness: 0.35 mm · Total length: 200 mm · Number of fixing points: 6 pcs · Pony spare part no.: A1888 · Sachs spare part no.: 0250 150 000
EUR 6,10
Oil seal NBR 15/30/5.5 A crankshaft | Sachs (A4215 & A5602)
Temperature resistance (min.): -30 - 100 °C · Simmering type: A - With rubberized outer part / one sealing lip. · Manufacturer: Sachs · Material: NBR · Surface: rubberized · Width: 5.5 mm · Ø outside: 30 mm · Place of use: Crankshaft · Ø inside: 15 mm · Pony spare part no.: A5602 · Sachs spare part no.: 0230 111 100
EUR 8,90
Gasket set large | Sachs 503 engine
Area of application: Standard · Material: Aluminum · Material: Copper · Material: Fiber · Material: Sealing carton · Material: Sealing paper · Ø outlet inside: 13.3 mm · Hole spacing inlet: 32 mm · Number of components: 14 pcs · Hole pattern [mm]: 60 x 40
EUR 45,00
swiing® revival air filter Racing | Sachs 503
Width: 68 mm · Height: 52 mm · Manufacturer: swiing® revival parts · Material: Plastic · Color: black · Filter type: Racing screen · Ø Internal connection: 20 mm · Area of application: Tuning · Mounting type: Plug connection clamped · Total length: 165 mm · Camouflaged: No
EUR 67,50
swiing® ingenious 15 mm intake manifold long version | Sachs 503 2AL, 2BL
Ø inside: 15 mm · Manufacturer: swiing® ingenious parts · Area of application: Tuning · Material: Aluminum · Ø External connection: 20 mm · Camouflaged: No · Total length: 70 mm · Number of fixing points: 2 pcs · Hole spacing inlet: 32 mm · Mounting type: Screws · Total height: 80 mm · Thread type: M6x1 (standard thread) · Height flange center hole: 70 mm · Pony spare part no.: A2176
EUR 67,50
Collection only possible with online purchase and appointment.
