41 mm tuning cylinder made of aluminum with Nikasil coating and 57 cc displacement suitable for mopeds / mopeds with Sachs 503 2AL, AAL, 2BL, ABL CH engine.
The racing kit offers a performance increase over the entire speed range, with a focus on low speeds and torque. Compared to the original cylinder, this racing cylinder has had the seal removed and the intake enlarged. The overflow channels have also been enlarged and the piston skirt has been optimized to improve the timing. The exhaust port has also been designed at a favorable angle.
In addition to the piston, the scope of delivery also includes the matching piston rings, clips, pins, stud bolts and the required gaskets for the base, intake and cylinder head.
Cylinder material: Cast aluminum with Nikasil coating
Piston material: Cast aluminum
Bore: 41 mm
Capacity: 56.77 cm³
Ø Cylinder neck: 45.5 mm
Ø Exhaust inside: 18.5 mm
Ø Exhaust outside: 25.8 mm
Inlet hole spacing: 32 mm
Inlet thread: M6 x 0.8 mm
Ø inlet: 14 mm
Cylinder base hole pattern: 40 x 60 mm
Ø stud bolt hole: 6.9 mm
Cylinder cover hole pattern: 37 x 37 mm
Piston pin: 12 mm
Note: For Sachs 503 ABL engines, the engine housing may need to be ground out slightly in the area of the cylinder neck.
Matching cylinder heads and corresponding add-on parts for the replacement cylinder can be found in the accessories section.
Branded product from the manufacturer AKOA.
Details
| Manufacturer | AKOA |
| Area of application | Tuning |
| Material | Aluminum |
| Surface | nikasil-coated |
| Displacement | 57 ccm |
| Crankshaft stroke | 43 mm |
| Ø piston pin (B) | 12 mm |
| Ø cylinder neck | 45.5 mm |
| Hole spacing inlet | 32 mm |
| Nominal diameter | 41 mm |
| Ø Outlet outside | 25.8 mm |
| Ø outlet inside | 18.5 mm |
| Ø Inlet inside | 14 mm |
| Number of fixing points | 4 pcs |
| Thread inlet | M6x1 (standard thread) |
| Hole pattern [mm] | 40 x 60 / 37 x 37 |
| Outlet type | clamped |
| Decompressor | No |
Suitable for the following models
| Sachs | 503 - AAL, ABL, 2AL / 2BL |
Accessories & related products
swiing 15 mm carburetor tuning camouflaged | Sachs 503
Total length: 66 mm · Width: 50 mm · Height: 95 mm · Manufacturer: swiing · Area of application: Tuning · Material: Aluminum · Carburetor type: SRE · Nominal diameter: 15 mm · Mounting type: Plug connection clamped · Ø Inside entrance: 15 mm · Ø Internal connection: 20 mm · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Nozzle thread: M3.5 · Nozzle block: 2.17 · Camouflaged: Yes · Nozzle size: 62 · Clamping screw torque (max.): 4 N/m
EUR 90,10
swiing® ingenious tuning set 40 mm | Sachs 503 (fan-cooled)
Nominal diameter: 40 mm · Manufacturer: GPO · Manufacturer: NGK · Manufacturer: swiing® ingenious parts · Displacement: 55 ccm · Crankshaft stroke: 42 mm · Hole spacing inlet: 32 mm · Ø piston pin (B): 12 mm · Outlet type: clamped · Hole pattern [mm]: 60 x 40 · Decompressor: No · Camouflaged: No · Area of application: Tuning
EUR 512,70
Not in stock
swiing® ingenious tuning cylinder 40 mm | Sachs 503
Nominal diameter: 40 mm · Manufacturer: swiing® ingenious parts · Material: Aluminum · Surface: sandblasted · Displacement: 55 ccm · Crankshaft stroke: 42 mm · Thread inlet: M6x1 (standard thread) · Hole spacing inlet: 32 mm · Ø piston pin (B): 12 mm · Outlet type: clamped · Number of fixing points: 4 pcs · Hole pattern [mm]: 60 x 40 / 37 x 37 · Decompressor: No · Camouflaged: No · Area of application: Tuning
EUR 191,50
Not in stock
swiing® ingenious tuning cylinder 38 mm | Sachs 503
Nominal diameter: 38 mm · Manufacturer: swiing® ingenious parts · Material: Aluminum · Surface: sandblasted · Displacement: 50 ccm · Crankshaft stroke: 42 mm · Thread inlet: M6x1 (standard thread) · Hole spacing inlet: 32 mm · Ø piston pin (B): 12 mm · Outlet type: clamped · Number of fixing points: 4 pcs · Hole pattern [mm]: 60 x 40 / 37 x 37 · Decompressor: No · Camouflaged: No · Area of application: Tuning
EUR 185,90
Not in stock
swiing® ingenious 15mm tuning set carburetor HG long | Sachs 503
Total length: 66 mm · Total length: 165 mm · Width: 50 mm · Width: 68 mm · Manufacturer: swiing · Area of application: Tuning · Nominal diameter: 15 mm · Color: black · Carburetor type: SRE · Mounting type: Flange · Mounting type: Plug connection clamped · Ø Inside entrance: 15 mm · Ø Internal connection: 20 mm · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Hole spacing inlet: 32 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Vacuum connection: No · Height: 52 mm · Height: 95 mm · Choke control: Hand choke · Nozzle thread: M3.5 · Nozzle block: 2.17 · Camouflaged: No · Nozzle size: 62 · Clamping screw torque (max.): 4 N/m
EUR 191,50
AKOA 38 mm cylinder kit | Sachs 503 2AL, AAL, 2BL, ABL
Manufacturer: AKOA · Material: Aluminum · Area of application: Standard · Crankshaft stroke: 43 mm · Displacement: 50 ccm · Nominal diameter: 38 mm · Surface: nikasil-coated · Ø cylinder neck: 45.5 mm · Ø Outlet outside: 25.8 mm · Ø outlet inside: 18.5 mm · Number of fixing points: 4 pcs · Ø Inlet inside: 14 mm · Ø piston pin (B): 12 mm · Thread inlet: M6x1 (standard thread) · Hole pattern [mm]: 40 x 60 / 37 x 37 · Hole spacing inlet: 32 mm · Outlet type: clamped · Decompressor: No
EUR 191,50
AKOA 40 mm cylinder kit | Sachs 503 2AL, AAL, 2BL, ABL
Manufacturer: AKOA · Material: Aluminum · Surface: nikasil-coated · Area of application: Tuning · Displacement: 54 ccm · Crankshaft stroke: 43 mm · Ø piston pin (B): 12 mm · Nominal diameter: 40 mm · Ø cylinder neck: 45.5 mm · Ø Outlet outside: 25.8 mm · Ø Inlet inside: 14 mm · Thread inlet: M6x1 (standard thread) · Number of fixing points: 4 pcs · Ø outlet inside: 18.5 mm · Outlet type: clamped · Hole spacing inlet: 32 mm · Hole pattern [mm]: 40 x 60 / 37 x 37 · Decompressor: No
EUR 191,50
BAD ASS Ø 41 mm "Pandora" tuning cylinder | Sachs 503, 50/2, 502
Nominal diameter: 41 mm · Manufacturer: BAD ASS · Material: Gray cast iron · Surface: sandblasted · Displacement: 55 ccm · Crankshaft stroke: 42 mm · Ø cylinder neck: 45 mm · Ø Outlet outside: 26 mm · Ø outlet inside: 23 mm · Ø Inlet inside: 19 mm · Thread inlet: M6x1 (standard thread) · Hole spacing inlet: 32 mm · Ø piston pin (B): 12 mm · Outlet type: clamped · Number of fixing points: 4 pcs · Hole pattern [mm]: 40 x 60 / 37 x 37 · Camouflaged: No · Area of application: Tuning
EUR 214,00
BAD ASS Ø 43 mm "Pandora" BigBore tuning cylinder | Sachs 503, 50/2, 502
Nominal diameter: 43 mm · Manufacturer: BAD ASS · Material: Gray cast iron · Surface: sandblasted · Displacement: 63 ccm · Crankshaft stroke: 42 mm · Ø cylinder neck: 45 mm · Ø Outlet outside: 26 mm · Ø outlet inside: 23 mm · Ø Inlet inside: 19 mm · Thread inlet: M6x1 (standard thread) · Hole spacing inlet: 32 mm · Ø piston pin (B): 12 mm · Outlet type: clamped · Number of fixing points: 4 pcs · Hole pattern [mm]: 40 x 60 / 37 x 37 · Camouflaged: No · Area of application: Tuning
EUR 360,60
Intake manifold 15 mm short | Sachs 503 2AL, 2BL
Material: Aluminum · Area of application: Tuning · Thread type: M6x1 (standard thread) · Ø inside: 15 mm · Ø External connection: 20 mm · Number of fixing points: 2 pcs · Total length: 50 mm · Hole spacing inlet: 32 mm · Mounting type: Screws · Sachs spare part no.: A2177
EUR 50,60
Not in stock
Moped fans like you also bought:
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø Stranded wire: 1.25 mm · Cable length: 2200 mm · Nipple shape: Cylinder · Ø nipple: 3 mm · Nipple length: 5 mm · Manufacturer: Made in Germany · Area of application: Standard · Material: Steel · Surface: blue galvanized · Number of components: 1 pcs
EUR 3,15
Brake cable Ø 1.8 mm x 220 cm (pear-shaped nipple)
Ø nipple: 3.5 mm · Ø nipple: 6 mm · Nipple length: 10 mm · Manufacturer: Made in Germany · Area of application: Standard · Material: Steel · Surface: blue galvanized · Ø Stranded wire: 1.8 mm · Nipple shape: Pears · Cable length: 2200 mm · Number of components: 1 pcs
EUR 2,70
Motorex Automatic Motor Oil (ATF) 450 ml
Manufacturer: Motorex · Contents [ml]: 450 ml · Gearbox type: Automatic machine · Temperature resistance (min.): -45 - 200 °C · Area of application: Gearbox lubrication with clutch · Pony spare part no.: A2080 · Sachs spare part no.: 0263 014 002
EUR 11,20
EUR 24,89/l
NSK BO15 shoulder ball bearing 15/40/10 (A4502)
Bearing cage: Brass cage ball-guided · Stock number: BO15 · Width: 10 mm · Inner ring width: 10 mm · Manufacturer: NSK · Material: Brass · Area of application: Standard · Material: Steel · Bearing type: Shoulder bearing · Surface: blank · Ø outside: 40 mm · Ø inside: 15 mm · Ball bearing closed: No · Pony spare part no.: A4502 · Sachs spare part no.: 0932 007 001
EUR 28,10
swiing 15 mm carburetor tuning camouflaged | Sachs 503
Total length: 66 mm · Width: 50 mm · Height: 95 mm · Manufacturer: swiing · Area of application: Tuning · Material: Aluminum · Carburetor type: SRE · Nominal diameter: 15 mm · Mounting type: Plug connection clamped · Ø Inside entrance: 15 mm · Ø Internal connection: 20 mm · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Nozzle thread: M3.5 · Nozzle block: 2.17 · Camouflaged: Yes · Nozzle size: 62 · Clamping screw torque (max.): 4 N/m
EUR 90,10
swiing® revival air filter Racing | Sachs 503
Manufacturer: swiing® revival parts · Mounting type: Plug connection clamped · Material: Plastic · Area of application: Tuning · Color: black · Total length: 165 mm · Filter type: Racing screen · Ø Internal connection: 20 mm · Width: 68 mm · Height: 52 mm · Camouflaged: No
EUR 67,50
swiing® ingenious 15 mm intake manifold long version | Sachs 503 2AL, 2BL
Manufacturer: swiing® ingenious parts · Mounting type: Screws · Material: Aluminum · Area of application: Tuning · Ø inside: 15 mm · Total length: 70 mm · Hole spacing inlet: 32 mm · Thread type: M6x1 (standard thread) · Height flange center hole: 70 mm · Total height: 80 mm · Number of fixing points: 2 pcs · Ø External connection: 20 mm · Camouflaged: No · Pony spare part no.: A2176
EUR 67,50
Collection only possible with online purchase and appointment.
