43 mm racing cylinder with 63 cc, suitable for Sachs mopeds / mopeds with 503 2AL, AAL, 2BL, ABL CH engines.
Thanks to the additional holes for the cylinder head bolts and the two mounts for the blower cover, the cylinder can also be fitted to the Sachs 50/2 and 502 models, although the intake and exhaust accessories must be made by yourself.
The large displacement and the huge intake ensure plenty of torque.
The cylinder can be used on both Sachs 50/2 and Sachs 503 mopeds with the original cylinder head, but it should be noted that the pinch point at the narrowest point should be at least 1.5 mm. To ensure optimum operation and thus tease the maximum power out of the cylinder, we recommend adapting the cylinder head to a combustion chamber diameter of 43 mm. It is best to use the 41 mm cylinder head from the accessories as a basis for this.
We also recommend that you use reinforced clutch springs so that the entire engine power can be transferred to the rear wheel. You can find these in the accessories section.
The BADASS 17 mm or 15 mm intake manifold is the perfect match for the cylinder, with which either a 15 mm Bing SRE or a 17 mm carburettor can be used.
You can find the intake manifolds, as well as carburetors, in the accessories section.
Details:
Differences to the GPO Pomodoro - replica cylinder:
Installation instructions in German and the matching piston are included in the scope of delivery.
Attention: It is essential to replace the rubber silencers on 503 BL engines with aluminum silencers due to the increased power output in order to avoid fatigue fracture of the exhaust flange.
The aluminum silentblocs, matching gaskets, reinforced clutch springs and other add-on parts such as intake manifolds, carburettors, exhausts, etc. can be found in the accessories section.
Made by the BADASS brand.
The set includes the following fixed parts:
Hole pattern [mm]: 60 x 40 · Manufacturer: BAD ASS · Material: Gray cast iron · Nominal diameter: 43 mm · Ø cylinder neck: 45 mm · Ø Outlet outside: 26 mm · Ø outlet inside: 22.5 mm · Ø Inlet inside: 19 mm · Thread inlet: M6x1 (standard thread) · Hole spacing inlet: 32.5 mm · Ø piston pin (B): 12 mm · Outlet type: clamped · Number of fixing points: 4 pcs · Decompressor: No · Camouflaged: No · Area of application: Tuning
Details
Manufacturer | BAD ASS |
Camouflaged | No |
Area of application | Tuning |
Material | Gray cast iron |
Surface | sandblasted |
Displacement | 63 ccm |
Crankshaft stroke | 42 mm |
Nominal diameter | 43 mm |
Ø cylinder neck | 45 mm |
Ø Outlet outside | 26 mm |
Ø Inlet inside | 19 mm |
Number of fixing points | 4 pcs |
Ø outlet inside | 23 mm |
Thread inlet | M6x1 (standard thread) |
Ø piston pin (B) | 12 mm |
Outlet type | clamped |
Hole pattern [mm] | 40 x 60 / 37 x 37 |
Hole spacing inlet | 32 mm |
Suitable for the following models
Sachs | 503 - AAL, ABL, 2AL / 2BL |
Accessories & related products
17 mm Bing SRF carburetor (replica)
Nominal diameter: 17 mm · Material: Aluminum · Area of application: Tuning · Carburetor type: SRF · Mounting type: Plug connection clamped · Width: 64 mm · Height: 117 mm · Total length: 78 mm · Nozzle thread: M4 · Ø Internal connection: 23 mm · Ø Air filter connection: 60 mm · Ø Air filter connection: 64 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Nozzle block: 2.xx · Clamping screw torque (max.): 3 N/m · Clamping screw torque (max.): 4 N/m
EUR 78,80
EUR 101,30
swiing nozzle set M3.5 (58 - 68) Bing SRE, SRA, SRC, SRF
Manufacturer: swiing · Total length: 6 mm · Material: Brass · Quantity: 6 pcs · Carburetor type: SRA (1/11/31) Velux · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Nozzle type: Main nozzle · Drive: Slot · Nozzle thread: M3.5 · Nozzle size: 58 · Nozzle size: 60 · Nozzle size: 62 · Nozzle size: 64 · Nozzle size: 66 · Nozzle size: 68
EUR 17,90
swiing® ingenious 15mm tuning set carburetor HG short | Sachs 503
Manufacturer: swiing® ingenious parts · Carburetor type: SRE · Nominal diameter: 15 mm · Ø Internal connection: 20 mm · Ø Inside entrance: 15 mm · Mounting type: Flange · Mounting type: Plug connection clamped · Area of application: Tuning · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Ø fuel hose connection: 6 mm · Choke control: Hand choke · Nozzle thread: M3.5 · Camouflaged: Yes · Nozzle size: 62 · Hole spacing inlet: 32 mm · Clamping screw torque (max.): 4 N/m
EUR 180,20
Not in stock
swiing 15 mm carburetor tuning camouflaged | Sachs 503
Manufacturer: swiing · Total length: 66 mm · Area of application: Tuning · Camouflaged: Yes · Material: Aluminum · Width: 50 mm · Carburetor type: SRE · Nominal diameter: 15 mm · Ø Internal connection: 20 mm · Ø Inside entrance: 15 mm · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Mounting type: Plug connection clamped · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Nozzle thread: M3.5 · Nozzle block: 2.17 · Nozzle size: 62 · Height: 95 mm · Clamping screw torque (max.): 4 N/m
EUR 90,10
swiing® revival air filter Racing | Sachs 503
Manufacturer: swiing® revival parts · Total length: 165 mm · Camouflaged: No · Area of application: Tuning · Material: Plastic · Width: 68 mm · Filter type: Racing screen · Ø Internal connection: 20 mm · Color: black · Mounting type: Plug connection clamped · Height: 52 mm
EUR 67,50
swiing® revival cylinder base gasket cylinder 0.3 mm | Sachs 503
Ø inside: 45 mm · Nominal diameter: 45 mm · Manufacturer: swiing® revival parts · Material: Oiled paper · Area of application: Standard · Ø cylinder: 38 - 40 mm · Thickness: 0.3 mm · Place of use: Cylinder base · Hole pattern [mm]: 60 x 40
EUR 3,85
Not in stock
swiing set exhaust resonance Ø 28 / 70 mm | Sachs 503
Total length: 730 mm · Manufacturer: swiing · Ø outside: 70 mm · Material: Steel · Color: Chrome · Surface: chrome-plated · Mounting type: Screwed clamp · Ø Internal connection: 28 mm · Exhaust type: Cigar · Flame tube attachment: Plug connection clamped
EUR 157,70
swiing® revival silent blocks Alu Racing | Sachs 503 / 504 / 505 / 535
Ø inside: 8.3 mm · Nominal diameter: 8.5 mm · Ø outside: 21.95 mm · Ø Bundle: 26 mm · Manufacturer: swiing® revival parts · Material: Aluminum · Surface: anodized · Total length: 13 mm · Alternative version of the Pony Spare part no.: A4286 · Alternative version of Sachs spare part no.: 0251 121 000
EUR 26,90
BAD ASS intake manifold 17 mm SRF short version | Sachs 503 2AL, 2BL
Thread type: M6x1 (standard thread) · Manufacturer: BAD ASS · Camouflaged: No · Area of application: Tuning · Material: Aluminum · Ø inside: 17 mm · Ø External connection: 23 mm · Total length: 54 mm · Mounting type: Screws · Total height: 56.5 mm · Height flange center hole: 45 mm · Number of fixing points: 3 pcs · Hole spacing inlet: 32 mm
EUR 84,40
EUR 101,30
swiing® ingenious 17 mm SRF carburetor tuning camouflaged | Sachs 503, Puch Velux
Manufacturer: swiing® ingenious parts · Total length: 61.5 mm · Area of application: Tuning · Camouflaged: Yes · Material: Aluminum · Width: 47 mm · Surface: blank · Carburetor type: SRE · Nominal diameter: 17 mm · Ø Internal connection: 23 mm · Ø Inside entrance: 17 mm · Ø Output inside: 17.1 mm · Ø Air filter connection: 23 mm · Mounting type: Plug connection clamped · Ø fuel hose connection: 5 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Nozzle thread: M3.5 · Nozzle block: 2.2 · Nozzle size: 74 · Height: 89 mm · Height: 112 mm · Clamping screw torque (max.): 3 N/m · Clamping screw torque (max.): 4 N/m
EUR 135,10
BAD ASS 17 mm intake manifold (short) Bing SRE | Sachs 503 2AL/2BL
Manufacturer: BAD ASS · Camouflaged: No · Area of application: Tuning · Material: Aluminum · Ø inside: 17.8 mm · Ø External connection: 20 mm · Number of fixing points: 2 pcs · Total length: 65 mm · Total height: 55 mm · Height flange center hole: 45 mm · Mounting type: Stud bolt · Hole spacing inlet: 32 mm
EUR 84,40
EUR 101,30
GPO cylinder gasket set BAD ASS Pandora 41 & 43 mm | Sachs 503, 50/2, 502
Manufacturer: GPO · Area of application: Tuning · Material: Oiled paper · Number of components: 2 pcs · Ø cylinder: 41 mm · Ø cylinder: 43 mm · Thickness: 0.3 mm · Thickness: 1 mm · Hole pattern [mm]: 60 x 40 mm / 37 x 37 mm · Hole spacing inlet: 32 mm
EUR 16,20
GPO piston 43 mm | Sachs 50/2, 50/3, 50/4
Nominal diameter: 43 mm · Manufacturer: GPO · Ø outside piston (A): 42.94 mm · Ø piston pin (B): 12 mm · Compression height (C): 27.7 mm · Curvature (D): 2.4 mm · Total piston height (E): 50.2 mm · Number of piston rings (F): 2 pcs · Piston ring mold: Rectangular ring · Piston ring impact: Internal fuse (IS) · Piston ring height: 1.5 mm · Thick piston ring: 1.8 mm
EUR 50,60
Moped fans like you also bought:
swiing® ingenious cigar Ø 28 / 70 mm chrome (reso exhaust)
Total length: 730 mm · Manufacturer: swiing® ingenious parts · Ø outside: 70 mm · Material: Steel · Color: Chrome · Surface: chrome-plated · Mounting type: Screwed clamp · Ø Internal connection: 28 mm · Exhaust type: Cigar
EUR 112,60
EUR 123,90
swiing set exhaust resonance Ø 28 / 70 mm | Sachs 503
Total length: 730 mm · Manufacturer: swiing · Ø outside: 70 mm · Material: Steel · Color: Chrome · Surface: chrome-plated · Mounting type: Screwed clamp · Ø Internal connection: 28 mm · Exhaust type: Cigar · Flame tube attachment: Plug connection clamped
EUR 157,70
BAD ASS intake manifold 17 mm SRF short version | Sachs 503 2AL, 2BL
Thread type: M6x1 (standard thread) · Manufacturer: BAD ASS · Camouflaged: No · Area of application: Tuning · Material: Aluminum · Ø inside: 17 mm · Ø External connection: 23 mm · Total length: 54 mm · Mounting type: Screws · Total height: 56.5 mm · Height flange center hole: 45 mm · Number of fixing points: 3 pcs · Hole spacing inlet: 32 mm
EUR 84,40
EUR 101,30
swiing® ingenious 17 mm SRF carburetor tuning camouflaged | Sachs 503, Puch Velux
Manufacturer: swiing® ingenious parts · Total length: 61.5 mm · Area of application: Tuning · Camouflaged: Yes · Material: Aluminum · Width: 47 mm · Surface: blank · Carburetor type: SRE · Nominal diameter: 17 mm · Ø Internal connection: 23 mm · Ø Inside entrance: 17 mm · Ø Output inside: 17.1 mm · Ø Air filter connection: 23 mm · Mounting type: Plug connection clamped · Ø fuel hose connection: 5 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Nozzle thread: M3.5 · Nozzle block: 2.2 · Nozzle size: 74 · Height: 89 mm · Height: 112 mm · Clamping screw torque (max.): 3 N/m · Clamping screw torque (max.): 4 N/m
EUR 135,10
GPO cylinder gasket set BAD ASS Pandora 41 & 43 mm | Sachs 503, 50/2, 502
Manufacturer: GPO · Area of application: Tuning · Material: Oiled paper · Number of components: 2 pcs · Ø cylinder: 41 mm · Ø cylinder: 43 mm · Thickness: 0.3 mm · Thickness: 1 mm · Hole pattern [mm]: 60 x 40 mm / 37 x 37 mm · Hole spacing inlet: 32 mm
EUR 16,20