Zinc-plated nose spring for adjusting the brake lever on your Puch Maxi S, N moped / moped.
The brake lever adjustment spring is mounted on the rear brake anchor plate.
Ø wire: 2.35 mm
Ø inside 25.5 mm
Material: steel, galvanized
You can find the brake anchor plate and matching brake pads in the accessories section.
Details
| Spring design | Torsion spring, Nose feather |
| Length spring hook | 50 mm |
| Ø wire | 2.4 mm |
| Leg length | 45 mm |
| Material | Spring steel |
| Surface | galvanized (blue) |
| Ø inside | 25.5 mm |
| Ø outside | 30 mm |
| Area of application | Original, Standard |
| Total length | 125 mm |
Suitable for the following models
| Puch |
Accessories & related products
swiing® revival rear brake anchor plate | Puch Maxi S, X30 NG
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Ø outside: 91 mm · Ø External brake pads: 80 mm · Ø axle: 12 mm · Ø shaft: 10 mm · Ø bore: 12.2 mm · Ø screw holder: 6.5 mm · Wide cam holder: 12 mm · Total length: 187 mm · Brake lever length (lever length): 55 mm · Cranking (offset): 8 mm
EUR 81,90
swiing® revival rear brake anchor plate | Puch Maxi N
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Ø outside: 92 mm · Ø External brake pads: 80 mm · Ø axle: 12 mm · Ø shaft: 10 mm · Ø bore: 12.2 mm · Ø screw holder: 6.5 mm · Wide cam holder: 12 mm · Total length: 135 mm · Brake lever length (lever length): 68 mm · Cranking (offset): 10 mm
EUR 87,80
Moped fans like you also bought:
Magura cable clamp Ø 8 x 15 mm
Manufacturer: Magura · Material: Brass · Material: Steel · Surface: galvanized (blue) · Surface: nickel-plated · Thread type: M6x1 (standard thread) · Ø Cable bushing: 2.3 mm · Drive: External hexagon · Drive: Slot · Ø Bundle: 6 mm · Screw head: Hexagon · Ø outside: 8 mm · Thread length: 7 mm · Total length: 15 mm · Width across flats SW: 7 mm · Area of application: Standard
EUR 2,95
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Possible lever positions: open / closed / reserve · Material lever: Metal · Filter type: Plastic net · Thread type: MF12x1 (fine pitch thread) · Installation direction: horizontal / horizontal · Outlet direction: below · Spare tube shape: curved · Ø fuel hose connection: 6 mm · Reserve level: 70 mm · Mounting type: Union nut
EUR 11,60
Fortune / Merrick 2.00-2.50 x 16/17" inner tube
Manufacturer: Fortune · Tire width [inch]: 2 - 2.5 " · Tire width [mm]: 50.8 - 63.5 · Width [inch]: 2 · Width [inch]: 2 1/4 · Width [inch]: 2 1/2 · Tire height [%]: 100 · Old designation: 20 x 2 · Old designation: 20 x 2.25 · Old designation: 20 x 2.5 · Old designation: 21 x 2 · Old designation: 21 x 2.25 · Old designation: 21 x 2.5 · Valve type: TR4 Auto valve · Wheel size [inch]: 16 - 17 " · Wheel size [inch]: 17 "
EUR 11,60
swiing® revival wheel axle set M12x1 x 185 cast rear wheel galvanized | Puch
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Width across flats SW: 19 mm · Total length: 185 mm · Thread type: MF12x1 (fine pitch thread) · Ø shaft: 11.9 mm · Ø outside: 11.8 mm · Thread length: 26 mm · Thread length: 52.5 mm · Shank length: 100 mm
EUR 17,50
swiing® revival screw set sprocket mounting galvanized | Puch Maxi
Drive: External hexagon · Manufacturer: swiing® revival parts · Thread length: 22 mm · Material: Steel · Surface: galvanized (blue) · Color: silver · Number of components: 24 pcs · Screw head: Hexagon · Thread type: M6x1 (standard thread) · Shank: No · Width across flats SW: 10 mm · Strength class: 8.8
EUR 9,25
swiing® revival rear brake anchor plate | Puch Maxi S, X30 NG
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Ø outside: 91 mm · Ø External brake pads: 80 mm · Ø axle: 12 mm · Ø shaft: 10 mm · Ø bore: 12.2 mm · Ø screw holder: 6.5 mm · Wide cam holder: 12 mm · Total length: 187 mm · Brake lever length (lever length): 55 mm · Cranking (offset): 8 mm
EUR 81,90
Collection only possible with online purchase and appointment.
