High-quality Ø 80x18 mm brake pads with return springs for the front and rear drum brakes on your moped, moped and small motorcycle.
The lining is slotted at an angle. This ensures better heat and brake dust dissipation, resulting in an increased braking effect.

Alternative brake pads, suitable springs and appropriate cleaning agents and lubricants can be found in the accessories section.

Exceptional product for the highest demands of the quality brand swiing®.

Details

Slotted	Yes
Manufacturer	swiing® ingenious parts
Ø drum	80 mm
Color	silver
Width	18 mm
Springs included	Yes
Ø locating bolt	10 mm
Number of springs	2 pcs
Area of application	Racing

Accessories & related products

NewFren brake shoes Ø 80 x 18 | Puch Maxi

For: Puch

21259

NewFren brake shoes Ø 80 x 18 | Puch Maxi

Manufacturer: NewFren · Ø drum: 80 mm · Width: 18 mm · Number of springs: 2 pcs · Springs included: Yes

EUR 18,60

Polini brake shoes Ø 80 x 18 | Puch Maxi

For: Puch

21718

Polini brake shoes Ø 80 x 18 | Puch Maxi

Manufacturer: Polini · Ø drum: 80 mm · Color: silver · Width: 18 mm · Number of springs: 2 pcs · Springs included: Yes · Ø locating bolt: 10 mm · Slotted: No · Area of application: Tuning

EUR 23,30

swiing brake shoes Ø 80 x 18 Racing slotted | Puch Maxi

For: Puch

23581

swiing brake shoes Ø 80 x 18 Racing slotted | Puch Maxi

Manufacturer: swiing · Ø drum: 80 mm · Width: 18 mm · Number of springs: 2 pcs · Springs included: Yes · Slotted: Yes · Area of application: Racing

EUR 26,80

NewFren brake shoe spring (l=31 mm) | Puch

For: Puch

23622

NewFren brake shoe spring (l=31 mm) | Puch

Spring design: Tension spring · Ø wire: 1.3 mm · Manufacturer: NewFren · Ø outside: 6.5 mm · Total length: 31 mm

EUR 3,40

Moped fans like you also bought:

For: Puch

10077

GPO control bearing set M26x1 mm | Puch

Bearing type: Bearing ring · Manufacturer: GPO · Material: Steel · Surface: galvanized (blue) · Color: silver · Ø outside: 41 mm · Ø inside: 26.8 mm · Ø mounting frame: 31 mm · Thread type: MF26x1 (fine pitch thread)

EUR 13,90

GPO sprocket 45 teeth black | Puch Maxi, Puch X30 NG-2AH

For: Puch

10102

GPO sprocket 45 teeth black | Puch Maxi, Puch X30 NG-2AH

Chain pitch: 1/2" x 3/16" · Chain type: 415H · Manufacturer: GPO · Material: Steel · Color: black · Number of teeth: 45 pcs · Surface: powder-coated · Ø bolt circle: 105.5 mm · Ø inside: 94 mm · Number of fixing points: 6 pcs · Ø mounting hole: 6.7 mm · Thickness: 4.5 mm · Hole spacing 2: 68 mm · Cranking (offset): 8 mm · Hole spacing: 36.5 mm

EUR 23,30

Motorex Automatic Motor Oil (ATF) 450 ml

For: Universal · Puch · Sachs · Tomos · Bye Bike

10366

Motorex Automatic Motor Oil (ATF) 450 ml

Temperature resistance (min.): -45 - 200 °C · Manufacturer: Motorex · Contents [ml]: 450 ml · Gearbox type: Automatic machine · Area of application: Gearbox lubrication with clutch · Pony OEM number: A2080 · Sachs OEM no.: 0263 014 002

EUR 11,60

EUR 25,78/l

Rim tape blue 17" (protection for inner tube)

For: Universal · Puch · Sachs · Pony / Cilo (Beta 521 & 512) · Piaggio · Zündapp Belmondo · Tomos

10994

Rim tape blue 17" (protection for inner tube)

Manufacturer: Made in Germany · Material: Rubber · Color: blue · Width: 23 mm · Total length: 1280 mm · Wheel size [inch]: 17 "

EUR 3,30

swiing® revival wheel axle set M12x1 x 185 cast rear wheel galvanized | Puch

For: Puch

11420

swiing® revival wheel axle set M12x1 x 185 cast rear wheel galvanized | Puch

Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Ø outside: 11.8 mm · Width across flats SW: 19 mm · Total length: 185 mm · Shank length: 100 mm · Ø shaft: 11.9 mm · Thread type: MF12x1 (fine pitch thread) · Thread length: 26 mm · Thread length: 52.5 mm

EUR 17,40

Inox

For: Puch

12307

swiing® revival screw set sprocket mounting Inox | Puch Maxi

Manufacturer: swiing® revival parts · Material: Chrome steel (stainless steel) · Color: gray · Width across flats SW: 10 mm · Number of components: 24 pcs · Drive: External hexagon · Screw head: Hexagon · Shank: No · Thread type: M6x1 (standard thread) · Thread length: 22 mm

EUR 15,10

Inox

For: Puch

15151

GPO screws (5 pieces) cast hub Inox | Puch

Manufacturer: GPO · Material: Chrome steel (stainless steel) · Thread type: M8x1.25 (standard thread) · Thread length: 25 mm · Drive: Hexagon socket · Shank: No · Screw head: Cylinder head · Number of components: 5 pcs

EUR 11,60

swiing® revival rear brake anchor plate | Puch Maxi S, X30 NG

For: Puch

22298

swiing® revival rear brake anchor plate | Puch Maxi S, X30 NG

Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Ø axle: 12 mm · Ø outside: 91 mm · Ø bore: 12.2 mm · Ø External brake pads: 80 mm · Total length: 187 mm · Ø screw holder: 6.5 mm · Ø shaft: 10 mm · Wide cam holder: 12 mm · Cranking (offset): 8 mm · Brake lever length (lever length): 55 mm

EUR 81,70

For: Puch

23581

swiing brake shoes Ø 80 x 18 Racing slotted | Puch Maxi

Manufacturer: swiing · Ø drum: 80 mm · Width: 18 mm · Number of springs: 2 pcs · Springs included: Yes · Slotted: Yes · Area of application: Racing

EUR 26,80

Collection only possible with online purchase and appointment.

swiing® ingenious brake shoes Ø 80 x 18 Racing slotted