Drain nipple for automatic intake E50 engines of Puch Maxi S and N mopeds/mopeds.
Drainage of the clutch cover is usually prescribed in racing. An oil-resistant fuel hose can also be fitted to the bleeding nipple with an outer diameter of 6 mm.
The engine must be equipped with a pull starter, as the starting mechanism can no longer be installed.
A selection of oil lines, pull starters and other add-on parts such as fastening screws, sealant, gasket, oil filler screw, etc. can be found in the accessories section.
Picture 3 & 4 serves to illustrate the assembly, the clutch cover is not included in the scope of delivery.
Details
| Manufacturer | MBR |
| Material | Aluminum |
Suitable for the following models
| Puch | E50 |
Accessories & related products
swiing® ingenious pull-wire starter PVL ignition | Puch E50
Manufacturer: swiing® ingenious parts · Material: Plastic · Material: Steel · Surface: chrome-plated · Surface: raw · Color: Chrome · Ignition system: PVL · Total length: 170 mm · Width: 150 mm · Height: 80 mm · Number of fixing points: 2 pcs · Hole spacing: 138 mm · Ø outside: 130 mm
EUR 175,70
swiing® ingenious pull starter Bosch / Ducati | Puch E50
Ø outside: 130 mm · Color: Chrome · Color: black-matt · Total length: 160 mm · Manufacturer: swiing® ingenious parts · Width: 150 mm · Material: Plastic · Material: Steel · Surface: chrome-plated · Ignition system: BOSCH · Ignition system: DUCATI · Height: 88 mm · Number of fixing points: 2 pcs · Hole spacing: 137.5 mm
EUR 175,70
swiing® revival screw set for clutch cover Inox | E50
Manufacturer: swiing® revival parts · Material: Chrome steel (stainless steel) · Surface: blank · Thread type: M6x1 (standard thread) · Drive: Slot · Screw head: Countersunk head · Screw head: Lens head · Number of components: 4 pcs · Puch OEM number: 900.9460
EUR 9,25
swiing® revival gasket gearbox cover engine 0.5 mm | Puch E50
Ø inside: 106 mm · Ø outside: 116 mm · Manufacturer: swiing® revival parts · Material: Sealing paper · Color: sand-colored · Thickness: 0.5 mm · Number of fixing points: 4 pcs · Number of components: 1 pcs · Alternative version of the Puch OEM number: 349.1.10.349.1
EUR 3,40
swiing® ingenious pull starter EVO & HPI ignition (210) | Puch E50
Manufacturer: swiing® ingenious parts · Material: Plastic · Material: Steel · Surface: chrome-plated · Surface: raw · Color: Chrome · Color: black · Ignition system: HPI · Ø outside: 130 mm · Number of fixing points: 2 pcs · Hole spacing: 137.5 mm · Height: 93 mm · Total length: 160 mm · Width: 135 mm
EUR 175,70
swiing® ingenious pull starter | Puch E50 MVT ignition
Manufacturer: swiing® ingenious parts · Material: Plastic · Material: Steel · Surface: chrome-plated · Surface: raw · Color: Chrome · Color: black-matt · Ignition system: MVT Allumage · Ø outside: 130 mm · Number of fixing points: 2 pcs · Hole spacing: 138 mm · Height: 82 mm · Total length: 170 mm · Width: 150 mm
EUR 175,70
Not in stock
Moped fans like you also bought:
Oil filler plug with sealing ring | Puch Maxi
Material: Steel · Surface: galvanized (blue) · Ø External head: 14 mm · Thread length: 6 mm · Thread type: M10x1.5 (standard thread) · Drive: Slot · Total length: 14.6 mm · Screw head: Lens head · Number of components: 2 pcs · Puch OEM number: 364.1.10.660.1
EUR 4,10
Not in stock
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Manufacturer: Magura · Material: Brass · Material: Steel · Surface: nickel-plated · Drive: Slot · Thread type: M4x0.7 (standard thread) · Total length: 6 mm · Ø Cable bushing: 1.6 mm · Screw head: Lens head · Thread length: 4 mm · Number of components: 2 pcs · Ø outside: 5 mm
EUR 2,35
Motorex Automatic Motor Oil (ATF) 450 ml
Manufacturer: Motorex · Area of application: Gearbox lubrication with clutch · Contents [ml]: 450 ml · Gearbox type: Automatic machine · Temperature resistance (min.): -45 - 200 °C · Pony OEM number: A2080 · Sachs OEM number: 0263 014 002
EUR 11,60
EUR 25,78/l
swiing® ingenious pull-wire starter PVL ignition | Puch E50
Manufacturer: swiing® ingenious parts · Material: Plastic · Material: Steel · Surface: chrome-plated · Surface: raw · Color: Chrome · Ignition system: PVL · Total length: 170 mm · Width: 150 mm · Height: 80 mm · Number of fixing points: 2 pcs · Hole spacing: 138 mm · Ø outside: 130 mm
EUR 175,70
M10 sealing ring Fiber
Material: Fiber · Surface: raw · Place of use: Carburetor · Place of use: Motor housing · Ø outside: 13.8 mm · Thickness: 1.6 mm · Ø inside: 10 mm · Area of application: Standard · Pony OEM number: A1817 · Pony OEM number: A5650 · Puch OEM number: 27071 · Sachs OEM number: 0250 042 001 · Sachs OEM number: 0650 131 000
EUR 1,85
swiing® revival gasket gearbox cover engine 1 mm | Puch E50
Manufacturer: swiing® revival parts · Material: Sealing paper · Number of components: 1 pcs · Thickness: 1 mm · Number of fixing points: 4 pcs · Ø inside: 106 mm · Color: sand-colored · Ø outside: 116 mm · Alternative version of the Puch OEM number: 349.1.10.349.1
EUR 4,55
Nut M10x1 SW14 Flywheel
Manufacturer: GPO · Material: Steel · Surface: galvanized (blue) · Area of application: Standard · Nut type: Flange nut · Thread type: MF10x1 (fine pitch thread) · Drive: External hexagon · Height: 8.9 mm · Ø outside: 18.8 mm · Width across flats SW: 14 mm · Pony OEM number: A4513 · Sachs OEM number: 0942 072 102
EUR 2,80
Collection only possible with online purchase and appointment.
