Insertion screw for the clutch on your Puch Maxi moped / moped with E50 engine.
The insertion screw is fitted to the clutch cover. The associated 1.6 mm thick sealing ring is included.
Drive: slotted
Screw head: lens head
Material: steel, galvanized
You can find the corresponding oil and other seals in the accessories.
Original Puch spare part number: 364.1.10.660.1
Details
| Material | Steel |
| Surface | blue galvanized |
| Total length | 14.6 mm |
| Drive | Slot |
| Thread length | 6 mm |
| Screw head | Lens head |
| Ø External head | 14 mm |
| Number of components | 2 pcs |
| Thread type | M10x1.5 (standard thread) |
| Puch spare part no. | 364.1.10.660.1 |
Suitable for the following models
| Puch | E50 |
Accessories & related products
GPO gasket set | Puch E50
Manufacturer: GPO · Area of application: Standard · Material: Aluminum · Material: Fiber · Material: Sealing carton · Material: Sealing paper · Ø outlet inside: 19.9 mm · Hole spacing inlet: 32 - 38 mm · Number of components: 7 pcs · Hole pattern [mm]: 44 x 44 · Decompressor: Yes · Hole spacing outlet: 42 mm
EUR 11,20
M10 sealing ring Fiber
Ø inside: 10 mm · Area of application: Standard · Material: Fiber · Surface: raw · Place of use: Carburetor · Place of use: Motor housing · Ø outside: 13.8 mm · Thickness: 1.6 mm · Pony spare part no.: A1817 · Pony spare part no.: A5650 · Puch spare part no.: 27071 · Sachs spare part no.: 0250 042 001 · Sachs spare part no.: 0650 131 000
EUR 1,80
Elring Dirko HT sealing compound gray (silicone) 70 ml permanently elastic up to 315°C
Manufacturer: Elring · Area of application: Chemistry · Material: Silicone · Color: gray · Contents [ml]: 70 ml · Hazard warning: Causes damage to organs through prolonged or repeated exposure · Temperature resistance (min.): -60 - 315 °C · Gap dimension (max.): 2 mm
EUR 22,40
EUR 320,00/l
Loctite 510 sealant 50 ml
Manufacturer: Loctite · Area of application: Chemistry · Material: Silicone · Color: pink · Contents [ml]: 50 ml · Hazard warning: Causes serious eye irritation · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Temperature resistance (min.): -55 - 250 °C · Gap dimension (max.): 0.25 mm
EUR 44,90
EUR 898,00/l
Dirko Dichtmasse rot (Silikon) Hochtemperatur 70 ml dauerelastisc
Manufacturer: Elring · Area of application: Chemistry · Color: red · Contents [ml]: 70 ml · Hazard warning: Causes serious eye irritation · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Temperature resistance (min.): -60 - 300 °C · Gap dimension (max.): 2 mm
EUR 25,80
EUR 368,57/l
Moped fans like you also bought:
Clutch 3-jaw (aluminum) | Puch E50
Ø inside: 12 mm · Ø inside: 14.6 mm · Area of application: Original · Area of application: Standard · Material: Aluminum · Material: Steel · Material addition: Composite materials · Number of springs: 3 pcs · Recording type: Cone mounting · Number of jaws: 3 pcs · Ø outside: 93 mm · Thickness: 20.9 mm
EUR 56,20
Not in stock
GPO gasket set | Puch E50
Manufacturer: GPO · Area of application: Standard · Material: Aluminum · Material: Fiber · Material: Sealing carton · Material: Sealing paper · Ø outlet inside: 19.9 mm · Hole spacing inlet: 32 - 38 mm · Number of components: 7 pcs · Hole pattern [mm]: 44 x 44 · Decompressor: Yes · Hole spacing outlet: 42 mm
EUR 11,20
swiing® revival M8x12 oil drain plug & copper ring | Puch E50, Z50
Width across flats Screw: 13 mm · Manufacturer: swiing® revival parts · Material: Copper · Material: Steel · Color: silver · Surface: blue galvanized · Drive: External hexagon · Drive: Slot · Thread length: 12 mm · Screw head: Hexagon · Total length: 18 mm · Thread type: M8x1.25 (standard thread) · Puch spare part no.: 901.1053
EUR 3,95
Motorex Automatic Motor Oil (ATF) 450 ml
Manufacturer: Motorex · Area of application: Gearbox lubrication with clutch · Contents [ml]: 450 ml · Gearbox type: Automatic machine · Temperature resistance (min.): -45 - 200 °C · Pony spare part no.: A2080 · Sachs spare part no.: 0263 014 002
EUR 11,20
EUR 24,89/l
swiing® revival stud bolt set M6 x 106 mm | Puch
Total length: 106 mm · Manufacturer: swiing® revival parts · Material: Steel · Surface: blue galvanized · Diameter: 5.9 mm · Drive: External hexagon · Thread type: M6x1 (standard thread) · Thread length: 13 mm · Thread length: 18.5 mm · Width across flats SW: 10 mm · Alternative version of the Puch spare part no.: 360.1.10.034.1
EUR 8,35
swiing® revival M8 oil drain plug & fiber ring | Puch
Manufacturer: swiing® revival parts · Area of application: Standard · Material: Bakelite · Material: Steel · Surface: blue galvanized · Total length: 12 mm · Drive: External hexagon · Width across flats SW: 13 mm · Thread type: M8x1.25 (standard thread) · Puch spare part no.: 901.1053
EUR 3,70
Collection only possible with online purchase and appointment.
