Special stud bolt set (centering sleeves) for Sachs 502, 50/2, 50/3, 50/4, 503, 504 mopeds, mopeds and small engine bikes.
Details
| Diameter | 6 mm |
| Manufacturer | swiing |
| Thread length | 14 mm, 9.5 mm |
| Material | Steel |
| Surface | burnished, galvanized (blue) |
| Total length | 27.3 mm |
| Drive | External hexagon |
| Strength class | 12.9, 10 |
| Thread type | M6x1 (standard thread), M5x0.8 (standard thread) |
| Width across flats SW | 8 mm |
Suitable for the following models
| Universal | |
| Sachs | 502 (Saxonette) - AL, AML 50/2 - L CH (0.8 PS), ML CH (0.8 PS), MB (2.6 PS), MLB (2.6 PS) 50/3 50/4 - MLFB (2.6 PS), LKH (4.5 PS) 503 - AAL, ABL, 2AL / 2BL |
Accessories & related products
Loctite 243 medium-strength threadlocker 10 ml
Temperature resistance (min.): -75 - 200 °C · Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Color: blue · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Contents [ml]: 10 ml · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Area of application: Chemistry · Adhesion: medium strength · Gap dimension (max.): 0.01 mm · Type of application: 1K · Alignment time: 600 sec · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
EUR 25,60
EUR 2.560,00/l
swiing® revival stud bolts M6x38 inlet/outlet galvanized (10.9 strength)
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Diameter: 5.9 mm · Total length: 38 mm · Thread type: M6x1 (standard thread) · Thread length: 11 mm · Thread length: 19 mm · Strength class: 10.9
EUR 2,35
swiing® revival cylinder base gasket cylinder 0.3 mm | Sachs 503
Manufacturer: swiing® revival parts · Material: Oiled paper · Ø cylinder: 38 - 40 mm · Nominal diameter: 45 mm · Place of use: Cylinder base · Ø inside: 45 mm · Thickness: 0.3 mm · Hole pattern [mm]: 60 x 40 · Area of application: Standard
EUR 4,00
Not in stock
Moped fans like you also bought:
Motorex engine oil (gear oil) manual 450 ml
Temperature resistance (min.): -30 - 220 °C · Manufacturer: Motorex · Oil type: GL4 · Viscosity (SAE): 80W · Contents [ml]: 450 ml · Gearbox type: Foot control · Gearbox type: Manual gearshift · Area of application: Gearbox lubrication with clutch
EUR 11,60
EUR 25,78/l
swiing® revival stud bolt M5 x 23 mm inlet (diaphragm) 10.9 | Sachs 50/2 (A3700)
Manufacturer: swiing® revival parts · Diameter: 4.9 mm · Surface: galvanized (blue) · Material: Steel · Total length: 23 mm · Thread type: M5x0.8 (standard thread) · Thread length: 6 mm · Thread length: 12 mm · Area of application: Standard · Pony OEM number: A3700 · Sachs OEM no.: 0640 016 101 · Sachs OEM no.: 0640 016 102
EUR 2,10
GPO piston 40.94 mm | Sachs 502, 50/2, 50/3, 50/4
Manufacturer: GPO · Ø outside piston (A): 40.94 mm · Ø piston pin (B): 12 mm · Compression height (C): 28 mm · Curvature (D): 3.2 mm · Total piston height (E): 49.4 mm · Number of piston rings (F): 2 pcs · Nominal diameter: 41 mm · Piston ring mold: Rectangular ring · Piston ring impact: Internal fuse (IS) · Piston ring height: 1.5 mm · Thick piston ring: 1.8 mm · Piston weight: 86 g
EUR 46,60
swiing® revival carburetor 13 mm Bing SSB 1/13/4
Manufacturer: swiing® revival parts · Total length: 132 mm · Material: Aluminum · Camouflaged: No · Area of application: Standard · Area of application: Tuning · Component group Carburetor: Carburetor complete · Carburetor type: SSB · Choke control: without choke · Nominal diameter: 13 mm · Ø fuel hose connection: 6 mm · Nozzle size: 75 · Mixed oil connection: No · Hole spacing inlet: 31 mm · Vacuum connection: No · Width: 87 mm · Height: 85 mm · Mounting type: Flange
EUR 150,00
Set
Hot 
swiing® ingenious 41 mm cylinder kit Racing (Version 2.0) fan-cooled | Sachs 50/2 (CH)
Manufacturer: swiing® ingenious parts · Material: Aluminum · Camouflaged: No · Surface: sandblasted · Displacement: 55 ccm · Crankshaft stroke: 42 mm · Ø piston pin (B): 12 mm · Nominal diameter: 41 mm · Ø cylinder neck: 45 mm · Ø outlet inside: 20.5 mm · Ø Inlet inside: 15.3 mm · Number of fixing points: 4 pcs · Thread inlet: M6x1 (standard thread) · Outlet type: Union nut · Hole pattern [mm]: 60 x 40 / 37 x 37 · Thread outlet: M35x2 (standard thread) · Hole spacing inlet: 31 mm · Area of application: Racing
EUR 257,10
Not in stock
Collection only possible with online purchase and appointment.
