41.0 mm piston with two 1.5 mm rectangular piston rings with internal fuse (IS) suitable for Sachs mopeds / mopeds 502, 50/2, 50/3 and 50/4 cylinders.
This replacement piston is suitable for the GPO Pomodoro 41 mm as well as the Badass Pandora 41 mm racing kit.
The detailed dimensions of the piston according to the technical drawing can be found in the details. You can also find out about the relevant piston rings, their stems and locking types on the legend in the pictures.
We recommend a piston clearance of 0.06 mm, so the cylinder should have a bore of 41.0 mm. The piston skirt is shortened by 4 mm on the inlet side.
The piston kit contains piston pins, piston clips and piston rings.
You will find the appropriate fitting tools, piston pin locks and, if necessary, the corresponding cylinder in the accessories section.
Good, inexpensive standard spare part. GPO – GOOD PARTS ONLY.
Details
Manufacturer | GPO |
Thick piston ring | 1.8 mm |
Ø outside piston (A) | 40.94 mm |
Ø piston pin (B) | 12 mm |
Compression height (C) | 28 mm |
Curvature (D) | 3.2 mm |
Total piston height (E) | 49.4 mm |
Number of piston rings (F) | 2 pcs |
Nominal diameter | 40 mm |
Piston ring mold | Rectangular ring |
Piston ring impact | Internal fuse (IS) |
Piston ring height | 1.5 mm |
Piston weight | 86 g |
Suitable for the following models
Sachs | 50 (Fahrtwind, 1.25 / 1.5 PS, DE) 502 (Saxonette) - AL, AML 50/2 - L CH (0.8 PS), ML CH (0.8 PS), MB (2.6 PS), MLB (2.6 PS) 50/3 50/4 - MLFB (2.6 PS), LKH (4.5 PS) 503 - AAL, ABL, 2AL / 2BL |
Accessories & related products
BAD ASS Ø 41 mm "Pandora" tuning cylinder | Sachs 503, 50/2, 502
Nominal diameter: 41 mm · Manufacturer: BAD ASS · Material: Gray cast iron · Surface: sandblasted · Displacement: 55 ccm · Crankshaft stroke: 42 mm · Ø cylinder neck: 45 mm · Ø Outlet outside: 26 mm · Ø outlet inside: 23 mm · Ø Inlet inside: 19 mm · Hole spacing inlet: 32 mm · Thread inlet: M6x1 (standard thread) · Hole pattern [mm]: 40 x 60 / 37 x 37 · Number of fixing points: 4 pcs · Ø piston pin (B): 12 mm · Outlet type: clamped · Area of application: Tuning · Camouflaged: No
EUR 222,60
Moped fans like you also bought:
swiing® revival stud bolt M5 x 23 mm inlet (diaphragm) 10.9 | Sachs 50/2 (A3700)
Manufacturer: swiing® revival parts · Thread type: M5x0.8 (standard thread) · Thread length: 6 mm · Thread length: 12 mm · Total length: 23 mm · Diameter: 4.9 mm · Area of application: Standard · Material: Steel · Surface: galvanized (blue) · Pony OEM number: A3700 · Sachs OEM number: 0640 016 101 · Sachs OEM number: 0640 016 102
EUR 2,10
swiing® revival gasket set cylinder diaphragm version | Sachs 50/2
Manufacturer: swiing® revival parts · Material: Copper · Material: Sealing paper · Number of components: 5 pcs · Ø cylinder: 38 mm · Hole spacing inlet: 31 mm · Hole spacing inlet: 67 - 31 mm · Ø outlet inside: 28 mm · Hole pattern [mm]: 60 x 40 mm · Area of application: Standard
EUR 15,50
swiing® ingenious 41 mm cylinder kit tuning diaphragm | Sachs 50/2 (CH)
Nominal diameter: 41 mm · Manufacturer: GPO · Manufacturer: swiing® ingenious parts · Material: Gray cast iron · Surface: sandblasted · Displacement: 55 ccm · Crankshaft stroke: 42 mm · Ø cylinder neck: 44 mm · Ø Outlet outside: 35 mm · Ø outlet inside: 26 mm · Ø Inlet inside: 19 mm · Inlet window: 57.5 x 19 · Thread inlet: M5x0.8 (standard thread) · Hole spacing inlet: 68 mm · Ø piston pin (B): 12 mm · Outlet type: Union nut · Thread outlet: M35x2 (standard thread) · Number of fixing points: 4 pcs · Hole pattern [mm]: 60 x 40 / 37 x 37 · Camouflaged: Yes · Area of application: Tuning
EUR 193,30
GPO Ø 41 mm "Pomodoro" cylinder kit | Sachs 503
Nominal diameter: 41 mm · Manufacturer: GPO · Material: Gray cast iron · Displacement: 55 ccm · Crankshaft stroke: 43 mm · Ø cylinder neck: 45 mm · Ø Outlet outside: 26 mm · Ø outlet inside: 22 mm · Ø Inlet inside: 19 mm · Thread inlet: M5x0.8 (standard thread) · Hole spacing inlet: 32 mm · Ø piston pin (B): 12 mm · Outlet type: clamped · Hole pattern [mm]: 40 x 60 / 37 x 37 · Area of application: Tuning
EUR 234,30
Not in stock