Montageanleitung
Set
Hot 
Slotted 41 mm racing cylinder made of aluminum for Swiss Sachs 50/2 (502) engines, which were installed on the following moped / moped models, among others: Alpa, Caravelle, Comet, DKW, Eiger, Göricke, Hercules, Prior, Pony Junior, Rico, Rixe, Walco etc.
Version 2.0:
The tuned aluminum cylinder has been extensively tested and further developed over the last few years and is now available with even more torque.
With larger displacement, optimized timing, larger intake and exhaust as well as enlarged overflow channels, your oldie becomes a high-flyer.
The tuned aluminum racing kit was developed and tested for years in Switzerland and is now finally available in version 2.0.
The new version delivers even more torque than the predecessor, without compromising in the mid and upper rev range.
The cylinder head, which can only be used for tuning cylinders in this series, is equipped with a raceway centering system. This ensures that the combustion chamber is perfectly aligned and the piston is not at TDC.
These attributes characterize the cylinder kit:mer
Scope of delivery:
- Cylinder Ø 41 mm
- Piston kit incl. Piston rings, pins (12 mm) and pin locks
- Cylinder head
- Gasket set
- Inlet and cylinder head stud bolts incl. Special nuts
We recommend taking the following precautions:
- The cylinder should be run in with semi-synthetic mixture oil in a ratio of 1:33 (3%) during the first fill-up at a maximum of 5000 rpm.
- The cylinder head stud bolts should be glued into the cylinder with a threadlocker.
- For optimum centering and easier installation of the cylinder base, we recommend using the M5/M6 special stud bolt set.
- For maximum performance, a 17 mm SSB carburettor can be installed. The intake window of the cylinder should be adapted to the carburettor.
All items mentioned are listed under accessories.
Exceptional product for the highest demands of the quality brand swiing®.
The set includes the following fixed parts:
Hole pattern [mm]: 60 x 40 / 37 x 37 · Manufacturer: swiing® ingenious parts · Material: Aluminum · Surface: sandblasted · Displacement: 55 ccm · Crankshaft stroke: 42 mm · Nominal diameter: 41 mm · Ø cylinder neck: 45 mm · Ø outlet inside: 20.5 mm · Ø Inlet inside: 15.3 mm · Thread inlet: M6x1 (standard thread) · Hole spacing inlet: 31 mm · Ø piston pin (B): 12 mm · Outlet type: Union nut · Thread outlet: M35x2 (standard thread) · Number of fixing points: 4 pcs · Decompressor: No · Camouflaged: No · Area of application: Tuning
Hole pattern [mm]: 37 x 37 · Manufacturer: swiing® ingenious parts · Material: Aluminum · Surface: sandblasted · Ø cylinder: 41 mm · Ø outside: 95 mm · Camouflaged: No · Number of fixing points: 4 pcs · Ø screw holder: 6.7 mm · Candle thread: short · Decompressor: M10x1.5 · Total length: 126.6 mm · Width: 95 mm · Height: 44.8 mm · Area of application: Tuning
Details
| Nominal diameter | 41 mm |
| Manufacturer | swiing® ingenious parts |
| Material | Aluminum |
| Surface | sandblasted |
| Displacement | 55 ccm |
| Crankshaft stroke | 42 mm |
| Ø cylinder neck | 45 mm |
| Ø outlet inside | 20.5 mm |
| Ø Inlet inside | 15.3 mm |
| Thread inlet | M6x1 (standard thread) |
| Hole spacing inlet | 31 mm |
| Ø piston pin (B) | 12 mm |
| Outlet type | Union nut |
| Number of fixing points | 4 pcs |
| Thread outlet | M35x2 (standard thread) |
| Hole pattern [mm] | 60 x 40 / 37 x 37 |
| Camouflaged | No |
| Area of application | Racing |
Suitable for the following models
| Sachs | 502 (Saxonette) - AL, AML 50/2 - L CH (0.8 PS), ML CH (0.8 PS), MB (2.6 PS), MLB (2.6 PS) |
Accessories & related products
Dell'Orto 16/16 SHA carburetor hand choke
Manufacturer: Dell'Orto · Camouflaged: No · Component group Carburetor: Carburetor complete · Material: Aluminum · Color: black · Carburetor type: SHA · Nominal diameter: 16 mm · Ø Internal connection: 19 mm · Ø without reducing sleeve: 21 mm · Ø Inside entrance: 16 mm · Ø Output inside: 16 mm · Ø Air filter connection: 56 mm · Ø Air filter connection: 58.5 mm · Ø fuel hose connection: 5.1 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Nozzle thread: M5x0.8 (standard thread) · Nozzle size: 82 · Mounting type: Plug connection clamped · Total length: 82 mm · Width: 72 mm · Height: 111 mm · Area of application: Tuning
EUR 80,70
Not in stock
Loctite 638 High-strength adhesive 10 ml
Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Area of application: Chemistry · Color: green · Contents [ml]: 10 ml · Hazard warning: Causes serious eye damage · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Danger · Hazard pictogram: GHS05 - Corrosive · Hazard pictogram: GHS07 - Caution dangerous · Adhesion: high-strength · Type of application: 1K · Gap dimension (max.): 0.25 mm · Alignment time: 300 sec · Temperature resistance (min.): -75 - 150 °C · Breakaway torque (according to material): 23 N/m · Breakaway torque (according to material): 25 N/m · Breakaway torque (according to material): 57 N/m
EUR 25,30
EUR 2.530,00/l
swiing resonance exhaust set Ø 28 / 70 mm | Sachs 50/2
Total length: 730 mm · Manufacturer: swiing · Material: Steel · Color: Chrome · Surface: chrome-plated · Mounting type: Screwed clamp · Ø Internal connection: 28 mm · Exhaust type: Cigar · Ø outside: 70 mm · Flame tube attachment: Union nut
EUR 173,10
swiing carburetor 17 mm Bing SSB 1/17/69
Manufacturer: swiing · Total length: 132 mm · Material: Aluminum · Camouflaged: No · Area of application: Standard · Area of application: Tuning · Component group Carburetor: Carburetor complete · Carburetor type: SSB · Choke control: without choke · Nominal diameter: 17 mm · Ø fuel hose connection: 6 mm · Nozzle size: 76 · Mixed oil connection: No · Hole spacing inlet: 31 mm · Vacuum connection: No · Width: 85 mm · Height: 100 mm · Mounting type: Flange
EUR 146,50
swiing® revival carburetor 13 mm Bing SSB 1/13/4
Manufacturer: swiing® revival parts · Camouflaged: No · Component group Carburetor: Carburetor complete · Material: Aluminum · Carburetor type: SSB · Nominal diameter: 13 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: without choke · Nozzle size: 75 · Mounting type: Flange · Hole spacing inlet: 31 mm · Total length: 132 mm · Width: 87 mm · Height: 85 mm · Area of application: Standard · Area of application: Tuning
EUR 146,50
swiing stud bolt set M6 / M5 Sachs (12.9 strength) Special
Manufacturer: swiing · Material: Steel · Surface: burnished · Surface: galvanized (blue) · Diameter: 6 mm · Drive: External hexagon · Total length: 27.3 mm · Thread length: 9.5 mm · Thread length: 14 mm · Width across flats SW: 8 mm · Strength class: 10 · Strength class: 12.9 · Thread type: M5x0.8 (standard thread) · Thread type: M6x1 (standard thread)
EUR 22,20
swiing® ingenious piston 41 mm | Sachs 50/2
Manufacturer: swiing® ingenious parts · Ø outside piston (A): 40.96 mm · Compression height (C): 28 mm · Curvature (D): 3.4 mm · Total piston height (E): 53 mm · Number of piston rings (F): 2 pcs · Nominal diameter: 41 mm · Piston ring mold: Rectangular ring · Piston ring impact: Flank safety device (FS) · Ø piston pin (B): 12 mm · Piston ring height: 1.5 mm · Piston weight: 91 g
EUR 67,70
swiing® ingenious 16 mm intake manifold Dell'Orto SHA | Sachs 50/2, 50/3, 50/4
Manufacturer: swiing® ingenious parts · Material: Aluminum · Area of application: Tuning · Surface: anodized · Color: graphite colors · Ø inside: 16 mm · Ø External connection: 19 mm · Mounting type: Screws · Hole spacing inlet: 31 mm · Number of fixing points: 2 pcs
EUR 56,30
Moped fans like you also bought:
NSK E15 shoulder ball bearing 15/35/8 (A1149)
Bearing cage: Brass cage ball-guided · Inner ring width: 8 mm · Manufacturer: NSK · Bearing clearance: CN (standard) · Groove ring: No · Material: Brass · Material: Steel · Surface: blank · Stock number: E15 · Bearing type: Shoulder bearing · Width: 8 mm · Ø inside: 15 mm · Ball bearing closed: No · Ø outside: 35 mm · Area of application: Standard · Pony OEM number: A1149 · Sachs OEM no.: 0232 017 006
EUR 28,70
Carburetor 17 mm Bing SSB 1/17/69 reproduction
Camouflaged: No · Component group Carburetor: Carburetor complete · Material: Aluminum · Carburetor type: SSB · Nominal diameter: 17 mm · Ø fuel hose connection: 6.2 mm · Mixed oil connection: No · Vacuum connection: Yes · Choke control: without choke · Nozzle thread: MF7x0.75 (fine pitch thread) · Nozzle size: 76 · Mounting type: Stud bolts & nuts · Hole spacing inlet: 31 mm · Clamping screw torque (max.): 3 N/m · Clamping screw torque (max.): 4 N/m · Total length: 116 mm · Width: 86 mm · Height: 99 mm · Area of application: Standard · Area of application: Tuning
EUR 92,30
swiing® revival carburetor 13 mm Bing SSB 1/13/4
Manufacturer: swiing® revival parts · Camouflaged: No · Component group Carburetor: Carburetor complete · Material: Aluminum · Carburetor type: SSB · Nominal diameter: 13 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: without choke · Nozzle size: 75 · Mounting type: Flange · Hole spacing inlet: 31 mm · Total length: 132 mm · Width: 87 mm · Height: 85 mm · Area of application: Standard · Area of application: Tuning
EUR 146,50
swiing stud bolt set M6 / M5 Sachs (12.9 strength) Special
Manufacturer: swiing · Material: Steel · Surface: burnished · Surface: galvanized (blue) · Diameter: 6 mm · Drive: External hexagon · Total length: 27.3 mm · Thread length: 9.5 mm · Thread length: 14 mm · Width across flats SW: 8 mm · Strength class: 10 · Strength class: 12.9 · Thread type: M5x0.8 (standard thread) · Thread type: M6x1 (standard thread)
EUR 22,20
swiing® revival ball bearing countershaft | Sachs 50/2, 50/3, 50/4, 503 2AL/2BL (A2531)
Bearing cage: "-" Sheet steel cage ball-guided · Inner ring width: 25.6 mm · Manufacturer: swiing® revival parts · Bearing clearance: CN (standard) · Material: Steel · Stock number: E15 · Bearing type: Deep groove ball bearing · Width: 8 mm · Ø inside: 15 mm · Ø outside: 35 mm · Thread type: MF20.8x1 LH (fine/left-hand thread) · Area of application: High End · Area of application: Standard · Pony OEM number: A2531 · Sachs OEM no.: 0286 079 105
EUR 57,60
Collection only possible with online purchase and appointment.
