Rubber seal for the gearshift and clutch lever of hand-shifted Sachs 50/2, 50/3, 503 2AL / 2BL and foot-shifted 50/4 engines.
Shaft seal dimensions:
Material: NBR Shore 70 (blue)
&reworked and accurately fitting version of the previously offered oil seal, the sealing lip no longer protrudes above the sealing ring.
Original Sachs spare part number: A3844
Good, inexpensive standard spare part. GPO – GOOD PARTS ONLY.
Details
Ø inside | 12.8 mm |
Thickness | 2.4 mm |
Ø outside | 19 mm |
Manufacturer | GPO |
Material | Rubber |
Pony OEM number | A3844 |
Sachs OEM number | 0650 017 000 |
Suitable for the following models
Sachs | 50 (Fahrtwind, 1.25 / 1.5 PS, DE) 50/2 - L CH (0.8 PS), ML CH (0.8 PS), MB (2.6 PS), MLB (2.6 PS) 50/3 50/4 - MLFB (2.6 PS), LKH (4.5 PS) 503 - ABL, 2AL / 2BL |
Accessories & related products
Gasket set with oil seals Diaphragm version | Sachs 50/2
Ø outlet inside: 28 mm · Area of application: Standard · Number of components: 16 pcs · Hole pattern [mm]: 60 x 40 · Hole spacing inlet: 31 mm · Hole spacing inlet: 67 - 31 mm · Pony OEM number: A2548 · Sachs OEM number: 0286 125 021
EUR 46,80
Elring Dirko HT sealing compound gray (silicone) 70 ml permanently elastic up to 315°C
Manufacturer: Elring · Material: Silicone · Color: gray · Hazard warning: Causes damage to organs through prolonged or repeated exposure · Contents [ml]: 70 ml · Temperature resistance (min.): -60 - 315 °C · Gap dimension (max.): 2 mm · Area of application: Chemistry
EUR 23,30
EUR 332,86/l
Moped fans like you also bought:
BING O-ring Bing SRE & 85, Ø 20 mm
Cord thickness: 1.4 mm · Ø inside: 17.2 mm · Ø outside: 20 mm · Manufacturer: BING · Material: Rubber · Surface: raw · Color: black · Place of use: Carburetor · Number of components: 1 pcs · Area of application: Standard · Pony OEM number: A4281 · Sachs OEM number: 0250 160 101
EUR 3,40
NSK E15 shoulder ball bearing 15/35/8 (A1149)
Bearing type: Shoulder bearing · Bearing cage: Brass cage ball-guided · Stock number: E15 · Ø inside: 15 mm · Ø outside: 35 mm · Inner ring width: 8 mm · Manufacturer: NSK · Bearing clearance: CN (standard) · Groove ring: No · Material: Brass · Material: Steel · Surface: blank · Width: 8 mm · Ball bearing closed: No · Area of application: Standard · Pony OEM number: A1149 · Sachs OEM number: 0232 017 006
EUR 29,20
NSK BO15 shoulder ball bearing 15/40/10 (A4502)
Bearing type: Shoulder bearing · Bearing cage: Brass cage ball-guided · Stock number: BO15 · Ø inside: 15 mm · Ø outside: 40 mm · Inner ring width: 10 mm · Manufacturer: NSK · Material: Brass · Material: Steel · Surface: blank · Width: 10 mm · Ball bearing closed: No · Area of application: Standard · Pony OEM number: A4502 · Sachs OEM number: 0932 007 001
EUR 29,20
Gasket set large | Sachs 503 engine
Material: Aluminum · Material: Copper · Material: Fiber · Material: Sealing carton · Material: Sealing paper · Number of components: 14 pcs · Ø outlet inside: 13.3 mm · Hole spacing inlet: 32 mm · Hole pattern [mm]: 60 x 40 · Area of application: Standard
EUR 46,80
swiing® revival clutch plates (2 pcs.) | Sachs 50/2, 503 2AL/2BL (A3887)
Ø inside: 29.7 mm · Ø inside: 36 mm · Ø outside: 93.7 mm · Manufacturer: swiing® revival parts · Material: Composite materials · Material: Steel · Recording type: Interlocking · Thickness: 3.3 mm · Number of slats: 2 pcs · Area of application: Standard · Pony OEM number: A3887 · Sachs OEM number: 0659 010 006
EUR 30,80
swiing® revival ball bearing countershaft | Sachs 50/2, 50/3, 50/4, 503 2AL/2BL (A2531)
Bearing type: Deep groove ball bearing · Bearing cage: "-" Sheet steel cage ball-guided · Stock number: E15 · Ø inside: 15 mm · Ø outside: 35 mm · Inner ring width: 25.6 mm · Manufacturer: swiing® revival parts · Bearing clearance: CN (standard) · Material: Steel · Width: 8 mm · Thread type: MF20.8x1 LH (fine/left-hand thread) · Area of application: High End · Area of application: Standard · Pony OEM number: A2531 · Sachs OEM number: 0286 079 105
EUR 58,50