Threaded axle with closed groove ball bearings for front cast hubs (Leleu) on your Puch moped / moped.
The threaded axle set consists of a 167 mm long wheel axle, two special ball bearings, two half-height and two high M12x1 nuts and various spacers.
The innovation set works with Leleu front wheel hubs, which are installed in cast rims.
Version 2.0: The already greased bearings now have an outer diameter of 29.02 mm, which ensures an improved fit and are fitted with a dust cover on both sides.
Mounting instructions: When mounting the ball bearings, it is important to note that the long spacer bush between the two ball bearings must be clamped to ensure that the two bearings press with the inner ring on the bush. If this is not observed, the ball bearings will inevitably jam.
Other axle parts can be found under accessories.
Exceptional product for the highest demands of the quality brand swiing®.
Details
| Thread type | MF12x1 (fine pitch thread) |
| Manufacturer | swiing® ingenious parts |
| Ball bearing closed | Yes |
| Total length | 165 mm |
| Material | Steel |
| Width | 34.5 mm, 6.6 mm, 11 mm, 2.7 mm |
| Surface | blue galvanized |
| Ø shaft | 11.95 mm |
| Ø inside | 12 mm |
| Shank length | 74.5 mm |
| Thread length | 50 mm, 40.5 mm |
| Width across flats SW | 19 mm |
| Ø outside | 29.02 mm |
| Height | 9.9 mm, 5.9 mm |
Suitable for the following models
| Puch |
Accessories & related products
Nut M12x1 x 10 SW19 Wheel nut galvanized
Thread type: MF26x1 (fine pitch thread) · Area of application: Standard · Material: Steel · Surface: blue galvanized · Nut type: Hexagon nut · Drive: External hexagon · Width across flats SW: 19 mm · Thread depth: 10 mm · Strength class: 8 · Height: 10 mm
EUR 2,25
swiing® ingenious wheel axle spoke hub front Ø 29 mm conversion kit with ball bearings | Puch
Ø inside: 12 mm · Ø outside: 29.02 mm · Ball bearing closed: Yes · Manufacturer: swiing® ingenious parts · Material: Steel · Surface: blue galvanized · Width: 2.7 mm · Width: 6.6 mm · Width: 11 mm · Width: 35.7 mm · Thread type: MF12x1 (fine pitch thread) · Height: 5.9 mm · Height: 9.9 mm · Total length: 165 mm · Ø shaft: 11.95 mm · Shank length: 74.5 mm · Thread length: 40.5 mm · Thread length: 50 mm · Width across flats SW: 19 mm
EUR 43,90
swiing® ingenious rear wheel axle Ø 29 mm conversion kit with ball bearings | Puch
Ø inside: 12 mm · Ø outside: 29 mm · Ball bearing closed: Yes · Manufacturer: swiing® ingenious parts · Material: Steel · Surface: blue galvanized · Diameter: 29 mm · Thread type: MF12x1 (fine pitch thread) · Total length: 190 mm · Ø shaft: 19 mm · Shank length: 100 mm · Thread length: 29 mm · Thread length: 53 mm · Width across flats SW: 19 mm
EUR 43,90
swiing® ingenious wheel bearing 12/29/9 spoke & cast rim | Puch Maxi
Bearing type: Deep groove ball bearing · Inner ring width: 9 mm · Ball bearing closed: Yes · Manufacturer: swiing® ingenious parts · Dust protection type: 2RS - NBR contact seal on both sides · Bearing clearance: CN (standard) · Bearing cage: "-" Sheet steel cage ball-guided · Material: Plastic · Material: Steel · Width: 9 mm · Surface: blank · Ø inside: 12 mm · Ø outside: 29.02 mm
EUR 10,00
66HEROES pointed nut "Spike" M12 Inox
Manufacturer: 66HEROES · Material: Chrome steel (stainless steel) · Nut type: Pointed nut · Thread type: M10x1.5 (standard thread) · Thread type: M12x1.75 (standard thread) · Thread type: M5x0.8 (standard thread) · Thread type: M6x1 (standard thread) · Thread type: M8x1.25 (standard thread) · Drive: External hexagon
EUR 7,80
Moped fans like you also bought:
GPO sprocket 45 teeth black | Puch Maxi, Puch X30 NG-2AH
Chain type: 415H · Manufacturer: GPO · Thickness: 4.5 mm · Material: Steel · Surface: powder-coated · Number of teeth: 45 pcs · Ø inside: 94 mm · Chain pitch: 1/2" x 3/16" · Color: black · Hole spacing: 36.5 mm · Hole spacing 2: 68 mm · Ø bolt circle: 105.5 mm · Ø mounting hole: 6.7 mm · Cranking (offset): 8 mm · Number of fixing points: 6 pcs
EUR 22,40
NTN wheel bearing 12/28/8 rear cast hub Leleu | Puch Maxi
Bearing type: Deep groove ball bearing · Stock number: 6001 · Inner ring width: 12 mm · Manufacturer: NTN · Ball bearing closed: Yes · Dust protection type: 2RS - NBR contact seal on both sides · Bearing clearance: CM (special/noise-reduced) · Bearing cage: "-" Sheet steel cage ball-guided · Groove ring: No · Area of application: Standard · Material: Plastic · Material: Steel · Width: 8 mm · Surface: blank · Ø inside: 12 mm · Ø outside: 28 mm
EUR 6,65
swiing® revival wheel axle set M12x1 x 185 cast rear wheel galvanized | Puch
Thread type: MF12x1 (fine pitch thread) · Manufacturer: swiing® revival parts · Total length: 185 mm · Material: Steel · Surface: blue galvanized · Ø shaft: 11.9 mm · Shank length: 100 mm · Thread length: 26 mm · Thread length: 52.5 mm · Width across flats SW: 19 mm · Ø outside: 11.8 mm
EUR 16,80
swiing® ingenious rear wheel axle Ø 29 mm conversion kit with ball bearings | Puch
Ø inside: 12 mm · Ø outside: 29 mm · Ball bearing closed: Yes · Manufacturer: swiing® ingenious parts · Material: Steel · Surface: blue galvanized · Diameter: 29 mm · Thread type: MF12x1 (fine pitch thread) · Total length: 190 mm · Ø shaft: 19 mm · Shank length: 100 mm · Thread length: 29 mm · Thread length: 53 mm · Width across flats SW: 19 mm
EUR 43,90
Collection only possible with online purchase and appointment.
