Wheel axle with closed groove ball bearings for rear Puch cast and spoke wheels.
The set consists of a 190 mm long wheel axle, two special ball bearings, three M12x1 nuts, a washer and two spacers. The dimension of the long spacers is 78.5 mm.
The innovation set works with original spoke and cast hubs.
Version 2.0: The already greased bearings now have an outer diameter of 29.02 mm, which ensures a better fit, and are fitted with a dust cover on both sides.
Mounting instructions: When mounting the ball bearings, it is important to note that the long spacer bush between the two ball bearings must be clamped to ensure that the two bearings press with the inner ring on the bush. If this is not observed, the ball bearings will inevitably jam.
Exceptional product for the highest demands of the swiing® quality brand.
Details
| Ø outside | 29 mm |
| Total length | 190 mm |
| Ø inside | 12 mm |
| Manufacturer | swiing® ingenious parts |
| Material | Steel |
| Surface | blue galvanized |
| Diameter | 29 mm |
| Ø shaft | 19 mm |
| Width across flats SW | 19 mm |
| Shank length | 100 mm |
| Thread type | MF12x1 (fine pitch thread) |
| Ball bearing closed | Yes |
| Thread length | 29 mm, 53 mm |
Suitable for the following models
| Puch |
Accessories & related products
Nut M12x1 x 10 SW19 Wheel nut galvanized
Material: Steel · Surface: blue galvanized · Nut type: Hexagon nut · Thread type: MF26x1 (fine pitch thread) · Drive: External hexagon · Width across flats SW: 19 mm · Strength class: 8 · Thread depth: 10 mm · Height: 10 mm · Area of application: Standard
EUR 2,25
swiing® ingenious wheel axle spoke hub front Ø 29 mm conversion kit with ball bearings | Puch
Manufacturer: swiing® ingenious parts · Material: Steel · Surface: blue galvanized · Thread type: MF12x1 (fine pitch thread) · Width across flats SW: 19 mm · Ø shaft: 11.95 mm · Ø inside: 12 mm · Ø outside: 29.02 mm · Shank length: 74.5 mm · Ball bearing closed: Yes · Width: 2.7 mm · Width: 6.6 mm · Width: 11 mm · Width: 35.7 mm · Total length: 165 mm · Thread length: 40.5 mm · Thread length: 50 mm · Height: 5.9 mm · Height: 9.9 mm
EUR 43,90
swiing® ingenious wheel bearing 12/29/9 spoke & cast rim | Puch Maxi
Bearing cage: "-" Sheet steel cage ball-guided · Inner ring width: 9 mm · Manufacturer: swiing® ingenious parts · Dust protection type: 2RS - NBR contact seal on both sides · Bearing clearance: CN (standard) · Material: Plastic · Material: Steel · Surface: blank · Bearing type: Deep groove ball bearing · Ø inside: 12 mm · Ø outside: 29.02 mm · Ball bearing closed: Yes · Width: 9 mm
EUR 10,00
66HEROES pointed nut "Spike" M12 Inox
Manufacturer: 66HEROES · Material: Chrome steel (stainless steel) · Nut type: Pointed nut · Thread type: M10x1.5 (standard thread) · Thread type: M12x1.75 (standard thread) · Thread type: M5x0.8 (standard thread) · Thread type: M6x1 (standard thread) · Thread type: M8x1.25 (standard thread) · Drive: External hexagon
EUR 7,80
Moped fans like you also bought:
Motorex Automatic Motor Oil (ATF) 450 ml
Manufacturer: Motorex · Contents [ml]: 450 ml · Gearbox type: Automatic machine · Temperature resistance (min.): -45 - 200 °C · Area of application: Gearbox lubrication with clutch · Pony spare part no.: A2080 · Sachs spare part no.: 0263 014 002
EUR 11,20
EUR 24,89/l
Fortune / Merrick 2.00-2.50 x 16/17" inner tube
Manufacturer: Fortune · Tire width [inch]: 2 - 2.5 " · Tire width [mm]: 50.8 - 63.5 · Wheel size [inch]: 16 - 17 " · Wheel size [inch]: 17 " · Tire height [%]: 100 · Width [inch]: 2 · Width [inch]: 2 1/4 · Width [inch]: 2 1/2 · Old designation: 20 x 2 · Old designation: 20 x 2.25 · Old designation: 20 x 2.5 · Old designation: 21 x 2 · Old designation: 21 x 2.25 · Old designation: 21 x 2.5 · Valve type: TR4 Auto valve
EUR 11,20
swiing® ingenious wheel axle spoke hub front Ø 29 mm conversion kit with ball bearings | Puch
Manufacturer: swiing® ingenious parts · Material: Steel · Surface: blue galvanized · Thread type: MF12x1 (fine pitch thread) · Width across flats SW: 19 mm · Ø shaft: 11.95 mm · Ø inside: 12 mm · Ø outside: 29.02 mm · Shank length: 74.5 mm · Ball bearing closed: Yes · Width: 2.7 mm · Width: 6.6 mm · Width: 11 mm · Width: 35.7 mm · Total length: 165 mm · Thread length: 40.5 mm · Thread length: 50 mm · Height: 5.9 mm · Height: 9.9 mm
EUR 43,90
Inner cable set automatic | Puch E50
Manufacturer: Made in Germany · Material: Steel · Quantity: 4 pcs · Ø Stranded wire: 1.25 mm · Ø Stranded wire: 1.5 mm · Ø Stranded wire: 1.8 mm · Nipple shape: Barrel (transverse) · Nipple shape: Cylinder · Nipple shape: Pears · Total length: 1600 mm · Total length: 2200 mm
EUR 11,20
swiing® ingenious wheel axle cast hub front Ø 29 mm conversion kit ball bearings | Puch
Manufacturer: swiing® ingenious parts · Material: Steel · Surface: blue galvanized · Thread type: MF12x1 (fine pitch thread) · Width across flats SW: 19 mm · Ø shaft: 11.95 mm · Ø inside: 12 mm · Ø outside: 29.02 mm · Shank length: 74.5 mm · Ball bearing closed: Yes · Width: 2.7 mm · Width: 6.6 mm · Width: 11 mm · Width: 34.5 mm · Total length: 165 mm · Thread length: 40.5 mm · Thread length: 50 mm · Height: 5.9 mm · Height: 9.9 mm
EUR 43,90
Collection only possible with online purchase and appointment.
