Engine mount 2.0 for Sachs 503 engines. Revised version for a better fit of the engine.
The revised version can only be used in conjunction with the engine mount 2.0. Not suitable for the conventional engine mounts.
No more makeshift placement of wooden blocks during engine overhauls and tilting of the engine when tightening the screws.
We offer you an exclusive engine holder with which you can carry out revisions, tuning or other work on the engine conveniently and efficiently.
The mounting bracket can be rotated 360°. The holder is only fixed to one half of the housing. This means that gearbox revisions can be carried out in full.
Figure 1 shows the "Expert 2.0" engine stand with the engine mount. The scope of delivery corresponds to picture 3 or 4.
Exceptional product for the highest demands of the quality brand swiing®.
Details
Manufacturer | swiing® ingenious parts |
Material | Steel |
Surface | galvanized (blue) |
Area of application | Motor bracket |
Suitable for the following models
Sachs | 503 - AAL, ABL, 2AL / 2BL, AB, AC, ADV |
Accessories & related products
swiing® ingenious "Expert" motor stand
Manufacturer: swiing® ingenious parts · Area of application: Motor bracket · Material: Steel · Surface: varnished · Color: red · Color: white · Total length: 370 mm · Width: 245 mm · Height: 340 mm · Material thickness: 3.5 mm · Ø Receptacle: 25 mm · Ø Receptacle: 35 mm · Hole spacing: 21.5 mm
EUR 87,20
Not in stock
Moped fans like you also bought:
GPO flywheel trigger M26x1.5 / M22x1.5 | Puch, Sachs, Beta 521
Width across flats (trigger): 27 mm · Manufacturer: GPO · Clamping depth: 10 mm · Material: Steel · Surface: blackened · Thread type: MF22x1.5 (fine pitch thread) · Thread type: MF26x1.5 (fine pitch thread) · Width across flats Screw: 19 mm · Strength class: 8.8 · Number of components: 1 pcs · Area of application: (Dis)assembly tool · Total length: 55 mm · Total length: 75 mm
EUR 11,50
Motorex engine oil (gear oil) manual 450 ml
Temperature resistance (min.): -30 - 220 °C · Manufacturer: Motorex · Viscosity (SAE): 80W · Oil type: GL4 · Contents [ml]: 450 ml · Gearbox type: Foot control · Gearbox type: Manual gearshift · Area of application: Gearbox lubrication with clutch
EUR 11,50
EUR 25,56/l
swiing® ingenious puller L17 / BO15 / E15 shoulder bearing
Width across flats (trigger): 8 mm · Width across flats (trigger): 19 mm · Span: 24 mm · Manufacturer: swiing® ingenious parts · Clamping depth: 10 mm · Peel-off tray: BO15 · Peel-off tray: E15 · Peel-off tray: L17 · Area of application: (Dis)assembly tool · Surface: galvanized (blue) · Diameter: 24 mm · Diameter: 40.3 mm · Number of components: 1 pcs · Total length: 120 mm · Thread type: M6x1 (standard thread) · Thread type: M8x1.25 (standard thread)
EUR 51,20
BING O-ring Bing SRE & 85, Ø 20 mm
Manufacturer: BING · Material: Rubber · Surface: raw · Ø inside: 17.2 mm · Ø outside: 20 mm · Cord thickness: 1.4 mm · Place of use: Carburetor · Color: black · Number of components: 1 pcs · Area of application: Standard · Pony OEM number: A4281 · Sachs OEM no.: 0250 160 101
EUR 3,35
NSK BO15 shoulder ball bearing 15/40/10 (A4502)
Stock number: BO15 · Inner ring width: 10 mm · Manufacturer: NSK · Bearing cage: Brass cage ball-guided · Material: Brass · Material: Steel · Surface: blank · Ø inside: 15 mm · Bearing type: Shoulder bearing · Ø outside: 40 mm · Ball bearing closed: No · Area of application: Standard · Width: 10 mm · Pony OEM number: A4502 · Sachs OEM no.: 0932 007 001
EUR 29,00
GPO clutch trigger (M27x1.25 / M20x1) | Sachs 502, 503
Thread type: MF20x1 (fine pitch thread) · Thread type: MF27x1.25 (fine pitch thread) · Width across flats (trigger): 27 mm · Width across flats Screw: 19 mm · Manufacturer: GPO · Total length: 57 mm · Strength class: 8.8 · Area of application: (Dis)assembly tool · Material: Steel · Surface: blackened
EUR 23,20
Large gasket set with shaft seals Engine | Sachs 503
Material: Aluminum · Material: Copper · Material: Fiber · Material: Sealing carton · Material: Sealing paper · Ø outlet inside: 13.3 mm · Hole spacing inlet: 32 mm · Number of components: 14 pcs · Hole pattern [mm]: 60 x 40 · Area of application: Standard
EUR 46,50
swiing® ingenious flywheel holder 3 pins (Bosch / Ducati flywheels)
Manufacturer: swiing® ingenious parts · Area of application: Special tool · Material: Steel · Surface: galvanized (blue) · Surface: rubberized · Diameter: 19 mm · Number of components: 1 pcs · Ø inside: 27 mm · Ø outside: 93 mm · Total length: 290 mm · Thickness: 5 mm · Height: 80 mm · Ø Pin: 8 mm
EUR 55,80
swiing® ingenious "Expert" motor stand
Manufacturer: swiing® ingenious parts · Area of application: Motor bracket · Material: Steel · Surface: varnished · Color: red · Color: white · Total length: 370 mm · Width: 245 mm · Height: 340 mm · Material thickness: 3.5 mm · Ø Receptacle: 25 mm · Ø Receptacle: 35 mm · Hole spacing: 21.5 mm
EUR 87,20
Not in stock