Very useful tool for fixing the flywheel.
The flywheel stopper can be used on all Bosch and Ducati flywheels, as well as those with the same masses.
Stable construction made of galvanized steel. Comfortable rubber grip.
Ø outer plate: 93 mm
Ø inner plate: 51 mm
Pin spacing: 68 mm
Ø pins: 8 mm
Pin length to heel: 5.5 mm
Figure 3 shows the application of the tool.
Exceptional product for the highest demands of the quality brand swiing®.
Details
Surface | galvanized (blue), rubberized |
Total length | 290 mm |
Ø Pin | 8 mm |
Height | 80 mm |
Manufacturer | swiing® ingenious parts |
Material | Steel |
Diameter | 19 mm |
Thickness | 5 mm |
Ø outside | 93 mm |
Ø inside | 27 mm |
Area of application | Special tool |
Number of components | 1 pcs |
Suitable for the following models
Universal | |
Puch | |
Sachs | 502 (Saxonette) - AL, AML 50/2 - L CH (0.8 PS), ML CH (0.8 PS), MB (2.6 PS), MLB (2.6 PS) 50/3 50/4 - MLFB (2.6 PS), LKH (4.5 PS) 50/5 503 - AAL, ABL, 2AL / 2BL, AB, AC, ADV 505 (with pedal shaft) - 1A (AT), 2A (HG) 535 |
Zündapp Belmondo | |
Zündapp | 247 Motor |
Accessories & related products
HPI flywheel (Bosch/Ducati)
Manufacturer: HPI · Material: Steel · Direction of rotation: left · Direction of rotation: right · Ø cone small inside: 10.9 mm · Ø cone large inside: 15.8 mm · Cone length: 28 mm · Cone ratio: 1:5 · Ø Flywheel outside: 71.5 mm · Thread type: MF27x1 LH (fine/left-hand thread)
EUR 111,80
Bosch flywheel clockwise NOS | Puch E50
Manufacturer: BOSCH · Material: Steel · Direction of rotation: right · Weight: 900 g · Ø cone small inside: 11.9 mm · Ø cone large inside: 15 mm · Cone length: 17.8 mm · Cone ratio: 1:5 · Ø Internal flywheel: 91.2 mm · Ø Flywheel outside: 115.8 mm · Thread type: MF26x1.5 (fine pitch thread) · Thread length: 6.5 mm · Height: 36.6 mm
EUR 253,40
Moped fans like you also bought:
GPO flywheel trigger M26x1.5 / M22x1.5 | Puch, Sachs, Beta 521
Width across flats (trigger): 27 mm · Manufacturer: GPO · Clamping depth: 10 mm · Material: Steel · Surface: blackened · Thread type: MF22x1.5 (fine pitch thread) · Thread type: MF26x1.5 (fine pitch thread) · Width across flats Screw: 19 mm · Strength class: 8.8 · Number of components: 1 pcs · Area of application: (Dis)assembly tool · Total length: 55 mm · Total length: 75 mm
EUR 11,50
swiing® ingenious puller L17 / BO15 / E15 shoulder bearing
Width across flats (trigger): 8 mm · Width across flats (trigger): 19 mm · Span: 24 mm · Manufacturer: swiing® ingenious parts · Clamping depth: 10 mm · Peel-off tray: BO15 · Peel-off tray: E15 · Peel-off tray: L17 · Area of application: (Dis)assembly tool · Surface: galvanized (blue) · Diameter: 24 mm · Diameter: 40.3 mm · Number of components: 1 pcs · Total length: 120 mm · Thread type: M6x1 (standard thread) · Thread type: M8x1.25 (standard thread)
EUR 51,20
GPO piston stopper M14x1.25
Manufacturer: GPO · Material: Steel · Surface: galvanized (blue) · Diameter: 12 mm · Diameter: 16 mm · Thread type: MF14x1.25 (fine pitch thread) · Number of components: 1 pcs · Width across flats SW: 17 mm · Area of application: Special tool · Total length: 83 mm
EUR 11,10
GPO clutch trigger (M27x1.25 / M20x1) | Sachs 502, 503
Thread type: MF20x1 (fine pitch thread) · Thread type: MF27x1.25 (fine pitch thread) · Width across flats (trigger): 27 mm · Width across flats Screw: 19 mm · Manufacturer: GPO · Total length: 57 mm · Strength class: 8.8 · Area of application: (Dis)assembly tool · Material: Steel · Surface: blackened
EUR 23,20
swiing® revival clamping device clutch | Sachs 503, 50/2, 50/3, 50/4
Manufacturer: swiing® revival parts · Material: Aluminum · Material: Steel · Surface: anodized · Surface: galvanized (blue) · Ø inside: 64 mm · Thread type: M6x1 (standard thread) · Ø outside: 75 mm · Thread length: 40 mm · Number of components: 4 pcs · Area of application: Special tool · Height: 16 mm · Sachs OEM no.: 0276 057 000
EUR 34,90
GPO piston pin extractor Ø 10, 12, 14 mm
Manufacturer: GPO · Material: Steel · Surface: burnished · Diameter: 10 mm · Diameter: 12 mm · Diameter: 14 mm · Number of components: 7 pcs · Width across flats SW: 10 mm · Width across flats SW: 17 mm · Area of application: (Dis)assembly tool · Total length: 130 mm
EUR 23,20