Hot 
Engine mounting bracket 2.0! Reworked version with improved motor mount holder.
Only usable in conjunction with the new motor mounts 2.0. Not suitable for the conventional engine mounts!
No more need to place wooden blocks under the engine during engine revisions or tilt the engine when tightening the screws.
We offer you an exclusive engine assembly tool with which you can carry out revisions, tuning or other work on the engine conveniently and efficiently.
The engine can be fixed in any conceivable position at an ergonomic height on a 360° swivel axis.
The stand can be firmly screwed to the base at 4 points.
Base plate dimensions: 25 x 25 cm
Distance from pivot point to base: 32 cm
You will find the matching motor holders in the accessories section below.
Fig. 3 shows the motor mounting stand with a mounted motor holder for illustration purposes. Scope of delivery according to picture 1 & 2.
Exceptional product for the highest demands of the quality brand swiing®.
Details
| Manufacturer | swiing® ingenious parts |
| Material | Steel |
| Surface | varnished |
| Color | white, red |
| Area of application | Motor bracket |
| Ø Receptacle | 25 mm, 35 mm |
| Total length | 370 mm |
| Material thickness | 3.5 mm |
| Hole spacing | 21.5 mm |
| Width | 245 mm |
| Height | 340 mm |
Suitable for the following models
| Puch | |
| Sachs | 50 (Fahrtwind, 1.25 / 1.5 PS, DE) 502 (Saxonette) - AL, AML 50/2 - L CH (0.8 PS), ML CH (0.8 PS), MB (2.6 PS), MLB (2.6 PS) 50/3 50/4 - MLFB (2.6 PS), LKH (4.5 PS) 503 - AAL, ABL, 2AL / 2BL, AB, AC, ADV 504 (ohne Tretwelle) 505 (mit Tretwelle) - 1A (AT), 2 A (HG) 508 - 1 A 535 |
| Pony / Cilo (Beta 521 & 512) | Beta 512 Beta diverse Beta 514 Beta 518 Beta 519 Beta 521 (Motor) Beta 520 |
| Piaggio | |
| Zündapp Belmondo | |
| DKW | |
| Kreidler | Flory MF |
Accessories & related products
Moped fans like you also bought:
GPO flywheel trigger M26x1.5 / M22x1.5 | Puch, Sachs, Beta 521
Width across flats (trigger): 27 mm · Manufacturer: GPO · Clamping depth: 10 mm · Width across flats Screw: 19 mm · Material: Steel · Surface: blackened · Number of components: 1 pcs · Thread type: MF22x1.5 (fine pitch thread) · Thread type: MF26x1.5 (fine pitch thread) · Total length: 55 mm · Total length: 75 mm · Strength class: 8.8 · Area of application: (Dis)assembly tool
EUR 11,60
swiing® ingenious puller L17 / BO15 / E15 shoulder bearing
Width across flats (trigger): 8 mm · Width across flats (trigger): 19 mm · Span: 24 mm · Manufacturer: swiing® ingenious parts · Clamping depth: 10 mm · Peel-off tray: BO15 · Peel-off tray: E15 · Peel-off tray: L17 · Area of application: (Dis)assembly tool · Surface: galvanized (blue) · Number of components: 1 pcs · Thread type: M6x1 (standard thread) · Thread type: M8x1.25 (standard thread) · Total length: 120 mm · Diameter: 24 mm · Diameter: 40.3 mm
EUR 51,30
swiing® ingenious flywheel holder 3 pins (Bosch / Ducati flywheels)
Surface: galvanized (blue) · Surface: rubberized · Manufacturer: swiing® ingenious parts · Height: 80 mm · Diameter: 19 mm · Area of application: Special tool · Material: Steel · Number of components: 1 pcs · Ø inside: 27 mm · Ø outside: 93 mm · Thickness: 5 mm · Total length: 290 mm · Ø Pin: 8 mm
EUR 56,00
Collection only possible with online purchase and appointment.
