Racing clutch from HK Tuning suitable for Puch Maxi mopeds/mopeds with E50 engine.
The tuning clutch is equipped with a reinforcing ring, reinforced springs and Kevlar linings.
From the factory, this racing clutch is set to an engagement speed of 7200 rpm and balanced so that all the linings engage simultaneously.
In contrast to the previously available HK clutch with aluminum arms, this version uses steel arms. This results in more contact pressure and makes this racing clutch a must-have product for heavily tuned engines.
Thanks to the built-in starter clutch lining, your moped / moped can still be started without a pull starter.
Ø outer: 93.3 mm
Thickness: 21 mm
Number of jaws: 3 pieces
Material: steel
You can continue to use your original clutch basket or one of the accessories.
Quality product from the Dutch manufacturer HK Clutches.
Details
| Manufacturer | HK Clutches |
| Material addition | Kevlar |
| Recording type | Cone mounting |
| Number of jaws | 3 pcs |
| Number of springs | 3 pcs |
| Ø outside | 93.3 mm |
| Area of application | Racing, High End, Cross |
Suitable for the following models
| Puch | E50 |
Accessories & related products
HK Clutch "Racing" Kickstarter | Puch E50
Manufacturer: HK Clutches · Thickness: 20.3 mm · Material: Steel · Material addition: Aluminum · Number of jaws: 3 pcs · Recording type: Cone mounting · Number of springs: 3 pcs · Ø outside: 93 mm · Area of application: Racing · Ø inside: 13.6 mm · Ø inside: 14.6 mm
EUR 349,30
Hot 
Jammer racing clutch special 65 ccm and more | Puch E50
Manufacturer: Jammer · Thickness: 19 mm · Material: Steel · Surface: blue galvanized · Material addition: Steel · Number of jaws: 3 pcs · Recording type: Cone mounting · Number of springs: 3 pcs · Ø outside: 92.5 mm · Area of application: High End · Area of application: MX · Area of application: Racing · Area of application: Tuning
EUR 214,00
Not in stock
HK clutch "Racing" (with additional weight) | Puch E50
Manufacturer: HK Clutches · Thickness: 21.2 mm · Material: Aluminum · Material: Chrome steel (stainless steel) · Material: Steel · Material addition: Composite materials · Number of jaws: 3 pcs · Recording type: Cone mounting · Number of springs: 3 pcs · Ø outside: 93 mm · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Ø inside: 12 mm · Ø inside: 14.6 mm
EUR 506,10
MBR clutch basket 19 teeth Racing angled | Puch E50
Manufacturer: MBR · Material: Steel · Color: silver · Recording type: Interlocking · Toothing type: helical toothed · Number of teeth: 19 pcs · Ø outside: 100.5 mm · Area of application: Tuning · Height: 49 mm · Ø inside: 15 mm · Ø inside: 17 mm · Ø Receptacle: 31.1 mm
EUR 208,40
MBR clutch basket 18 teeth Racing straight | Puch E50
Manufacturer: MBR · Material: Steel · Ø inside: 15 mm · Ø inside: 17 mm · Recording type: Interlocking · Height: 49 mm · Ø outside: 99.5 mm · Toothing type: straight toothed · Number of teeth: 18 pcs · Ø Receptacle: 31 mm · Area of application: Tuning
EUR 208,40
Clutch basket 21 teeth needle bearing lightened | Puch E50
Material: Steel · Color: graphite colors · Recording type: Interlocking · Toothing type: helical toothed · Number of teeth: 21 pcs · Ø outside: 99.6 mm · Area of application: Tuning · Height: 49.5 mm · Ø inside: 15 mm · Ø Receptacle: 30.5 mm
EUR 140,80
Moped fans like you also bought:
swiing® ingenious clutch springs reinforced (+20%) (Version 2.0) | Puch E50
Spring design: Pressure spring · Ø wire: 1.7 mm · Manufacturer: swiing® ingenious parts · Material: Spring steel · Surface: coated · Number of components: 3 pcs · Color: blue · Ø outside: 8.3 mm · Total length: 28 mm · Ø inside: 4.8 mm · Area of application: Tuning
EUR 20,20
Polini CP 21 mm carburetor (hand choke)
Nominal diameter: 21 mm · Manufacturer: Polini · Material: Aluminum · Camouflaged: No · Mounting type: Plug connection clamped · Carburetor type: CP · Ø Internal connection: 24 mm · Total length: 73.5 mm · Ø without reducing sleeve: 26 mm · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Ø Inside entrance: 21 mm · Ø Output inside: 21 mm · Height: 135 mm · Ø Air filter connection: 46 mm · Width: 75 mm · Ø fuel hose connection: 6 mm · Ø fuel hose connection: 7 mm · Mixed oil connection: Yes · Vacuum connection: Yes · Choke control: Hand choke · Nozzle thread: M5 · Nozzle size: 72 · Size of secondary nozzle: 42
EUR 169,00
Polini jet set (101 - 119) main jets long version CP, Keihin, Koso, PWK
Manufacturer: Polini · Material: Brass · Quantity: 10 pcs · Drive: External hexagon · Carburetor type: CP · Carburetor type: Coso · Carburetor type: Keihin · Carburetor type: PWK · Nozzle type: Main nozzle · Nozzle size: 101 · Nozzle size: 103 · Nozzle size: 105 · Nozzle size: 107 · Nozzle size: 109 · Nozzle size: 111 · Nozzle size: 113 · Nozzle size: 115 · Nozzle size: 117 · Nozzle size: 119
EUR 45,00
MBR clutch basket 18 teeth Racing straight | Puch E50
Manufacturer: MBR · Material: Steel · Ø inside: 15 mm · Ø inside: 17 mm · Recording type: Interlocking · Height: 49 mm · Ø outside: 99.5 mm · Toothing type: straight toothed · Number of teeth: 18 pcs · Ø Receptacle: 31 mm · Area of application: Tuning
EUR 208,40
Hot
swiing® ingenious "Expert" motor stand
Manufacturer: swiing® ingenious parts · Material: Steel · Surface: varnished · Color: red · Color: white · Total length: 370 mm · Area of application: Motor bracket · Height: 340 mm · Ø Receptacle: 25 mm · Ø Receptacle: 35 mm · Width: 245 mm · Material thickness: 3.5 mm · Hole spacing: 21.5 mm
EUR 84,30
Collection only possible with online purchase and appointment.
