One of the best clutches available for the Puch E50 engine.
Qualitatively very high quality.
Three different spring strengths are included for the corresponding application range, with the heaviest springs you can achieve a clutch engagement speed of approx. 5000 rpm
The low-wear copper linings provide the necessary grip.
Weight: 440 grams. Lightweight construction, ideal for any racing moped.
We recommend using the clutch only from 65 cc. For smaller cylinders, the centrifugal clutch tends to be too hard, which can lead to too much slippage.
We recommend rounding off the holes in the linings into which the springs are inserted.
This ensures that the springs are not damaged and will hold even under heavy loads.
Quality product from the American manufacturer Jammer Clutches.
Details
Thickness | 19 mm |
Manufacturer | Jammer |
Material | Steel |
Surface | galvanized (blue) |
Material addition | Steel |
Number of jaws | 3 pcs |
Recording type | Cone mounting |
Number of springs | 3 pcs |
Ø outside | 92.5 mm |
Area of application | Racing, High End, Tuning, MX |
Suitable for the following models
Puch | E50 |
Accessories & related products
Jammer clutch 1st gear | Tomos A35, A55
Manufacturer: Jammer · Material: Steel · Material addition: Aluminum · Number of jaws: 3 pcs · Recording type: Interlocking · Number of springs: 3 pcs · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Tomos OEM number: 227849
EUR 223,60
Malossi replacement clutch springs Jammer clutch | Puch, Tomos
Spring design: Tension spring · Ø wire: 2.2 mm · Ø wire: 2.3 mm · Ø wire: 2.4 mm · Manufacturer: Malossi · Material: Spring steel · Color: red · Surface: varnished · Color: white · Color: yellow · Total length: 32.6 mm · Area of application: Tuning
EUR 34,90
Moped fans like you also bought:
swiing® revival screw set engine galvanized | Puch Maxi
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Screw head: Countersunk head · Screw head: Cylinder head · Screw head: Lens head · Drive: Cross recess · Drive: Hexagon socket · Puch OEM number: 900.1216 · Puch OEM number: 901.1308
EUR 11,50
swiing® revival gasket gearbox cover engine 1 mm | Puch E50
Manufacturer: swiing® revival parts · Material: Sealing paper · Color: sand-colored · Ø outside: 116 mm · Number of components: 1 pcs · Thickness: 1 mm · Ø inside: 106 mm · Number of fixing points: 4 pcs · Alternative version of the Puch OEM number: 349.1.10.349.1
EUR 4,55
swiing® ingenious 17 mm SRF carburetor tuning camouflaged | Puch Maxi, Supermaxi, X30 NS / NL
Manufacturer: swiing® ingenious parts · Mounting type: Plug connection clamped · Material: Aluminum · Component group Carburetor: Carburetor complete · Surface: raw · Width: 47 mm · Carburetor type: SRE · Nominal diameter: 17 mm · Total length: 65 mm · Height: 89 mm · Height: 109 mm · Camouflaged: Yes · Ø Internal connection: 23 mm · Ø Inside entrance: 17 mm · Ø Output inside: 17.1 mm · Area of application: Tuning · Ø Air filter connection: 27.5 mm · Ø fuel hose connection: 5 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle block: 2.2 · Nozzle size: 74 · Clamping screw torque (max.): 3 N/m · Clamping screw torque (max.): 4 N/m
EUR 139,70
swiing® ingenious intake manifold 17 mm SRF | Puch E50
Total length: 38 mm · Manufacturer: swiing® ingenious parts · Mounting type: Stud bolts & nuts · Material: Aluminum · Ø inside: 17 mm · Camouflaged: Yes · Ø External connection: 23 mm · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Height flange center hole: 42 mm · Number of fixing points: 2 pcs · Total height: 53.5 mm · Hole spacing inlet: 38 mm
EUR 52,30
Rito crankshaft full cheeks with mounted bearings | Puch E50
Manufacturer: Rito · Thread type: MF10x1 (fine pitch thread) · Thread length: 10 mm · Material: Steel · Cheek type: Full cheeks · Crankshaft stroke: 43 mm · Connecting rod length center-center: 90 mm · Total length of crankpin on clutch side: 74 mm · Total length crankpin ignition side: 66 mm · Ø crank webs: 69.9 mm · Ø Connecting rod eye: 15 mm · Ø piston pin (B): 12 mm · Ø Bearing seat (clutch side): 17 mm · Ø Bearing seat (ignition side): 17 mm · Dimension needle bearing: 12 / 15 x 14.2 (axe 12) · Wide crank webs: 34 mm · Length 1st paragraph: 9 mm · Length 2nd paragraph: 14.5 mm · Length 3rd paragraph: 25 mm · Area of application: High End · Ø 1st step (on the coupling side): 22 mm · Ø 2nd shoulder (on the clutch side): 17 mm · Ø 3rd step (on the clutch side): 15 mm · Length of shoulder (ignition side): 26.6 mm
EUR 233,00