Lightened clutch basket with 21 teeth suitable for Puch Maxi mopeds with 1-speed e50 engine.
Special design with needle bearing. This clutch basket was developed for heavily souped-up engines where the brass bushing bearing reaches its limits.
Advantages of the needle bearing:
- Higher speeds possible
- Smooth, even running
- Optimal lubrication
- Better heat dissipation
Optimal adjustment of the clutch basket clearance is essential. Inadequate adjustment can destroy the bearing in a very short time.
Note the corresponding dimensions in Figure 3.
You will find suitable thrust washers in the accessories, which are fitted in front of and behind the clutch basket.
Details
| Material | Steel |
| Color | graphite colors |
| Ø Receptacle | 30.5 mm |
| Toothing type | helical toothed |
| Recording type | Interlocking |
| Number of teeth | 21 pcs |
| Ø outside | 99.6 mm |
| Area of application | Tuning |
| Ø inside | 15 mm |
| Height | 49.5 mm |
Suitable for the following models
| Puch | E50 |
Accessories & related products
Moped fans like you also bought:
BERU spark plug connector / 1 kΩ interference suppressed
Manufacturer: BERU · Material: Sheet metal (steel) · Color: silver · Spark plug socket: M4 · Cable available: No · Suppressed: Yes · Resistance: 1000 Ω · Ø cable: 5 mm · Ø cable: 7 mm · Pony OEM number: A2099 · Sachs OEM no.: 0265 100 00
EUR 10,20
Clutch 3-jaw aluminum | Puch E50
Material: Aluminum · Material: Steel · Material addition: Composite materials · Number of springs: 3 pcs · Ø outside: 93 mm · Ø inside: 12 mm · Ø inside: 14.6 mm · Recording type: Cone mounting · Number of jaws: 3 pcs · Area of application: Original · Area of application: Standard · Thickness: 20.9 mm
EUR 58,30
swiing® revival stud bolt set M6 x 106 mm | Puch
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Width across flats SW: 10 mm · Total length: 106 mm · Drive: External hexagon · Diameter: 5.9 mm · Thread type: M6x1 (standard thread) · Thread length: 13 mm · Thread length: 18.5 mm · Alternative version of the Puch OEM number: 360.1.10.034.1
EUR 8,65
swiing® revival thrust washer set Ø 15 / 17 mm | Puch E50
Manufacturer: swiing® revival parts · Material: Steel · Surface: hardened & ground · Ø outside: 22 mm · Ø outside: 24 mm · Ø inside: 15 mm · Ø inside: 17 mm · Area of application: Standard · Thickness: 1.1 mm · Thickness: 1.3 mm · Thickness: 1.5 mm · Thickness: 1.7 mm
EUR 45,20
Collection only possible with online purchase and appointment.
