Internal rotor magnetic connection for anticlockwise and clockwise rotating motors.
The electronic ignition is supplied with the base plate from swiing and is therefore suitable for all Puch mopeds such as Maxi S / N with E50 or ZA50 engine, X30 Sport NS / NL (Z50), X30 Sport N-2AH, Supermaxi LG1 / LG2, Velux X30, X30 Racing NG-2AH without any modifications.
Also suitable for all Sachs 502, 50/2, 50/3, 50/4 & 503 engines, as well as Zündapp Belmondo 247 engines.
For the fan-cooled engines, it should be noted that a transition piece must be made from the rotor to the impeller.
This racing ignition is ideal for tuned mopeds.
With integrated speed controller: If the blue cable of the CDI is connected to ground, the speed is throttled to 5000 rpm. Depending on the gear ratio, this corresponds to a speed of approx. 25-35 km/h
Rotor weight: 268 grams
For the basic setting of the ignition, the marking on the pole wheel must match the corresponding marking on the stator when the piston is at TDC.
The installation of a 12 volt voltage regulator is essential, you will find this in the accessories section.
Legendary wiring:
- Stator cable red/black: CDI cable red/black
- Stator cable yellow/green: Ground (bare spot on frame or motor housing)
- Cable stator yellow: Light (unregulated) 0-25V
- Cable stator white: Charging current (unregulated) 0-25V
- Cable CDI orange: Zünd coil
- Cable CDI white-black: Switch-off button (if the cable is connected to ground, the ignition is interrupted)
- Cable CDI black: (connect to ground on ignition coil)
- Cable CDI red/black: Stator
- Cable CDI blue: Speed control, e.g. on switch as on accessories
- .e.g. on switch as listed in the accessories (if the cable is connected to ground, the speed is limited)
Quality product from the Spanish manufacturer MVT Allumage.
The set includes the following fixed parts:
Manufacturer: swiing® ingenious parts · Material: Aluminum · Surface: anodized · Color: red · Ø outside: 90 mm · Area of application: Tuning
Manufacturer: MVT Allumage · Tension: 12 V · Performance: 65 W · Direction of rotation: left, right · Ø mounting plate: 94 mm · Ø Flywheel outside: 49.2 mm · Ø cable: 7 mm · Mounting type: Screws · Number of fixing points: 2 pcs · Weight: 268 g · Area of application: Tuning
Details
| Ø cable | 7 mm |
| Manufacturer | MVT Allumage, swiing |
| Tension | 12 V |
| Direction of rotation | left |
| Ø mounting plate | 96 mm |
| Mounting type | Screws |
| Ø Flywheel outside | 49.2 mm |
| Performance | 65 W |
| Weight | 268 g |
| Number of fixing points | 2 pcs |
| Area of application | Tuning |
Suitable for the following models
| Puch | E50 ZA50 (air-cooled) ZA50 (fan-cooled) Z50 (X30 Sport) Z50 (X30 Velux) 2-speed MS, MV, MV50 3-speed VSD, DS, VZ, MC |
| Sachs | 50 (Fahrtwind, 1.25 / 1.5 hp, DE) 502 (Saxonette) - AL, AML 50/2 - L CH (0.8 PS), ML CH (0.8 PS), MB (2.6 PS), MLB (2.6 PS) 50/3 50/4 - MLFB (2.6 PS), LKH (4.5 PS) 50/5 503 - AAL, ABL, 2AL / 2BL, AB, AC, ADV 505 (with pedal shaft) - 1A (AT), 2A (HG) 535 |
| Zündapp Belmondo |
Accessories & related products
Hot 
Leonelli 12V voltage regulator (1A quality)
Manufacturer: Leonelli · Total length: 50 mm · Material: Aluminum · Material: Plastic · Type of current: Alternating current (AC) · Width: 27 mm · Height: 15 mm · Tension: 12 V · Performance: 100 W · Ø mounting hole: 6 mm · Mounting type: Screws
EUR 40,70
swiing® ingenious 124 g additional weight MVT, PVL, Selettra
Manufacturer: swiing® ingenious parts · Area of application: High End · Area of application: Performance · Area of application: Racing · Material: Steel · Area of application: Tuning · Surface: galvanized (blue) · Thickness: 4 mm · Ø inside: 24.5 mm · Ø outside: 65 mm · Number of fixing points: 3 pcs · Weight: 131 g
EUR 22,40
Not in stock
swiing® ingenious 80 g additional weight MVT, PVL, Selettra
Manufacturer: swiing® ingenious parts · Area of application: High End · Area of application: Performance · Area of application: Racing · Material: Steel · Area of application: Tuning · Surface: galvanized (blue) · Thickness: 4 mm · Ø inside: 24.5 mm · Ø outside: 65 mm · Number of fixing points: 3 pcs · Weight: 87 g
EUR 20,90
swiing® ingenious 100 g additional weight / adapter plate | MVT, PVL, Selettra
Manufacturer: swiing® ingenious parts · Area of application: High End · Area of application: Performance · Area of application: Racing · Material: Steel · Area of application: Tuning · Surface: galvanized (blue) · Thickness: 9 mm · Ø inside: 24.5 mm · Ø outside: 65 mm · Ø bolt circle: 50 mm · Number of fixing points: 4 pcs · Ø mounting hole: 6 mm · Weight: 110 g
EUR 42,40
swiing® ingenious pull starter | Puch E50 MVT ignition
Manufacturer: swiing® ingenious parts · Material: Plastic · Material: Steel · Surface: chrome-plated · Surface: raw · Color: Chrome · Color: black-matt · Ignition system: MVT Allumage · Total length: 170 mm · Width: 150 mm · Height: 82 mm · Ø outside: 130 mm · Hole spacing: 138 mm · Number of fixing points: 2 pcs
EUR 174,70
Not in stock
MVT Premium CDI Box analog ignition | Puch / Sachs
Manufacturer: MVT Allumage · Area of application: High End · Area of application: Performance · Material: Plastic · Area of application: Racing · Area of application: Tuning · Surface: raw · Color: black · Total length: 56.5 mm · Width: 27.5 mm · Height: 29.2 mm
EUR 92,00
MVT Premium Stator Ignition | Puch / Sachs
Manufacturer: MVT Allumage · Material: Aluminum · Area of application: High End · Area of application: Performance · Material: Plastic · Area of application: Racing · Area of application: Tuning · Tension: 12 V · Color: black · Number of cables: 4 pcs · Number of fixing points: 2 pcs
EUR 184,00
MVT ignition coil Premium Ignition | Puch / Sachs
Manufacturer: MVT Allumage · Place of use: External (outside the ignition) · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Color: black · Ø cable holder: 7 mm · Mounting type: Screws · Number of fixing points: 3 pcs
EUR 57,00
Moped fans like you also bought:
GPO flywheel trigger M26x1.5 / M22x1.5 | Puch, Sachs, Beta 521
Width across flats (trigger): 27 mm · Manufacturer: GPO · Clamping depth: 10 mm · Total length: 55 mm · Total length: 75 mm · Material: Steel · Surface: blackened · Thread type: MF22x1.5 (fine pitch thread) · Thread type: MF26x1.5 (fine pitch thread) · Area of application: (Dis)assembly tool · Width across flats Screw: 19 mm · Number of components: 1 pcs · Strength class: 8.8
EUR 11,50
Hot
Leonelli 12V voltage regulator (1A quality)
Manufacturer: Leonelli · Total length: 50 mm · Material: Aluminum · Material: Plastic · Type of current: Alternating current (AC) · Width: 27 mm · Height: 15 mm · Tension: 12 V · Performance: 100 W · Ø mounting hole: 6 mm · Mounting type: Screws
EUR 40,70
GPO piston stopper M14x1.25
Manufacturer: GPO · Area of application: Special tool · Material: Steel · Surface: galvanized (blue) · Diameter: 12 mm · Diameter: 16 mm · Thread type: MF14x1.25 (fine pitch thread) · Width across flats SW: 17 mm · Number of components: 1 pcs · Total length: 83 mm
EUR 11,10
swiing® ingenious 100 g additional weight / adapter plate | MVT, PVL, Selettra
Manufacturer: swiing® ingenious parts · Area of application: High End · Area of application: Performance · Area of application: Racing · Material: Steel · Area of application: Tuning · Surface: galvanized (blue) · Thickness: 9 mm · Ø inside: 24.5 mm · Ø outside: 65 mm · Ø bolt circle: 50 mm · Number of fixing points: 4 pcs · Ø mounting hole: 6 mm · Weight: 110 g
EUR 42,40
swiing® ingenious pull starter | Puch E50 MVT ignition
Manufacturer: swiing® ingenious parts · Material: Plastic · Material: Steel · Surface: chrome-plated · Surface: raw · Color: Chrome · Color: black-matt · Ignition system: MVT Allumage · Total length: 170 mm · Width: 150 mm · Height: 82 mm · Ø outside: 130 mm · Hole spacing: 138 mm · Number of fixing points: 2 pcs
EUR 174,70
Not in stock
Collection only possible with online purchase and appointment.
