Complete anchor plate for electronic ignition, suitable for Piaggio Ciao, Si, Bravo and Boxer mopeds / mopeds.
This contactless ignition impresses with its high quality and has been extensively tested.
The cable lengths are identical to the factory-fitted ELO ignition from Piaggio.
Technical data:
- Voltage: 12 volts
- Wattage: 90 watts
- Yellow output: light
- Brown output: Brake light (if present)
- Blue output: indicators (if present)
Advantages of the CDI ignition:
- optimal ignition timing at any speed
- always a strong, constant ignition spark
- No more false ignitions
- Possibility to connect several consumers
- no need to adjust the ignition
- Little to no wear and tear
Note: This ignition only fits on the housing, which already had an electronic ignition fitted as standard. Also on racing housings such as the Polini Speed Engine or the Malossi housing for electronic ignitions. When converting your engine with 6V breaker ignition to this 12V ignition, you must also convert the glow plug to 12V and also install a voltage regulator.
You can find a voltage regulator, the right flywheel and other parts for your electric ignition in the accessories section.
Good, inexpensive standard spare part. GPO – GOOD PARTS ONLY.
Original Piaggio spare part number: 219965
Details
| Ø outside | 105 mm |
| Manufacturer | GPO |
| Tension | 12 V |
| Performance | 90 W |
| Number of cables | 6 pcs |
| Cable length | 400 mm, 100 mm |
| Ø inside | 29.5 mm |
| Hole spacing | 34.5 mm |
| Number of fixing points | 3 pcs |
| Piaggio spare part no. | 219965 |
Suitable for the following models
| Piaggio | Ciao - Ciao, Ciao, Ciao, Ciao Si Bravo/Superbravo Boxer Grillo |
Accessories & related products
Hot 
Leonelli 12V voltage regulator (1A quality)
Manufacturer: Leonelli · Material: Aluminum · Material: Plastic · Tension: 12 V · Surface: blue galvanized · Performance: 100 W · Type of current: Alternating current (AC) · Total length: 50 mm · Width: 27 mm · Height: 15 mm · Mounting type: Screws · Ø mounting hole: 6 mm
EUR 39,30
GPO ignition coil CDI | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: GPO · Area of application: Original · Area of application: Performance · Area of application: Standard · Color: black · Ø cable holder: 7.9 mm · Place of use: External (outside the ignition) · Height: 35.5 mm · Total length: 95 mm · Mounting type: Screws · Number of fixing points: 2 pcs · Ø mounting hole: 5.7 mm · Cable length: 192 mm · Hole spacing: 33 mm
EUR 45,00
Polini Speed Engine electronic ignition housing | Piaggio Ciao, SI, Bravo, Boxer
Stock number: 6202 · Manufacturer: Polini · Material: Aluminum · Color: silver · Surface: sandblasted · Crankshaft stroke: 43 mm · Total length: 215 mm · Width: 175 mm · Ignition type: Electronic · Height: 104 mm
EUR 241,80
Moderate Casual 
Flywheel puller | Piaggio Ciao, SI, Bravo, Boxer
Width across flats (trigger): 19 mm · Width across flats Screw: 18 mm · Manufacturer: Quenching · Pull-off depth inside: 68 mm · Area of application: (Dis)assembly tool · Material: Steel · Surface: burnished · Surface: galvanized · Diameter: 12.9 mm · Total length: 36.5 mm · Number of components: 2 pcs · Thread type: MF17x1 (fine pitch thread)
EUR 13,40
DUCATI ignition coil CDI | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: DUCATI · Area of application: Original · Area of application: Standard · Color: blue · Place of use: External (outside the ignition) · Number of fixing points: 2 pcs · Mounting type: Screws · Piaggio spare part no.: 214417 · Piaggio spare part no.: 244127 · Piaggio spare part no.: 610324M · Piaggio spare part no.: 2441275
EUR 93,40
GPO Electronic ignition 12V | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: GPO · Light coil voltage: 12 V · Performance: 90 W · Direction of rotation: right · Area of application: Original · Area of application: Standard · Mounting type: Screws · Number of fixing points: 3 pcs · Piaggio spare part no.: 181103 · Piaggio spare part no.: 219965 · Piaggio spare part no.: 244127
EUR 259,10
GPO flywheel 800 g full cheek shaft electronic ignition | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: GPO · Material: Aluminum · Direction of rotation: right · Weight: 800 g · Ø Internal flywheel: 106 mm · Ø Flywheel outside: 139.5 mm · Thread type: MF17x1 (fine pitch thread) · Alternative version of Piaggio spare part no.: 181103 · Alternative version of Piaggio spare part no.: 2238183
EUR 151,40
swiing® revival screw set stator galvanized | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: swiing® revival parts · Area of application: Standard · Material: Steel · Surface: blue galvanized · Drive: Cross recess · Thread length: 20 mm · Screw head: Lens head · Shank: No · Number of components: 6 pcs · Thread type: M5x0.8 (standard thread)
EUR 4,40
GPO stator electronic ignition with light (one output) | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: GPO · Tension: 12 V · Performance: 90 W · Number of cables: 4 pcs · Ø outside: 105 mm · Cable length: 100 mm · Cable length: 400 mm · Number of fixing points: 3 pcs · Hole spacing: 34.5 mm
EUR 112,60
Moped fans like you also bought:
Hot
Leonelli 12V voltage regulator (1A quality)
Manufacturer: Leonelli · Material: Aluminum · Material: Plastic · Tension: 12 V · Surface: blue galvanized · Performance: 100 W · Type of current: Alternating current (AC) · Total length: 50 mm · Width: 27 mm · Height: 15 mm · Mounting type: Screws · Ø mounting hole: 6 mm
EUR 39,30
GPO ignition coil CDI | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: GPO · Area of application: Original · Area of application: Performance · Area of application: Standard · Color: black · Ø cable holder: 7.9 mm · Place of use: External (outside the ignition) · Height: 35.5 mm · Total length: 95 mm · Mounting type: Screws · Number of fixing points: 2 pcs · Ø mounting hole: 5.7 mm · Cable length: 192 mm · Hole spacing: 33 mm
EUR 45,00
Polini Speed Engine electronic ignition housing | Piaggio Ciao, SI, Bravo, Boxer
Stock number: 6202 · Manufacturer: Polini · Material: Aluminum · Color: silver · Surface: sandblasted · Crankshaft stroke: 43 mm · Total length: 215 mm · Width: 175 mm · Ignition type: Electronic · Height: 104 mm
EUR 241,80
swiing® revival stud bolt set M7x120 mm cylinder | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: swiing® revival parts · Material: Steel · Surface: blue galvanized · Diameter: 6.2 mm · Total length: 120 mm · Drive: External hexagon · Thread length: 25 mm · Width across flats SW: 11 mm · Strength class: 8 · Strength class: 8.8 · Thread type: M7x1 (standard thread)
EUR 13,10
GPO flywheel 800 g full cheek shaft electronic ignition | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: GPO · Material: Aluminum · Direction of rotation: right · Weight: 800 g · Ø Internal flywheel: 106 mm · Ø Flywheel outside: 139.5 mm · Thread type: MF17x1 (fine pitch thread) · Alternative version of Piaggio spare part no.: 181103 · Alternative version of Piaggio spare part no.: 2238183
EUR 151,40
GPO Electronic ignition 12V | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: GPO · Light coil voltage: 12 V · Performance: 90 W · Direction of rotation: right · Area of application: Original · Area of application: Standard · Mounting type: Screws · Number of fixing points: 3 pcs · Piaggio spare part no.: 181103 · Piaggio spare part no.: 219965 · Piaggio spare part no.: 244127
EUR 259,10
Collection only possible with online purchase and appointment.
