White 10 - 30V LED light, suitable for various headlights with corresponding 1-pin P26s plate holder.
This bulb can be installed in front lights on Piaggio Ciao, Si, Bravo and Boxer as well as some Puch mopeds / mopeds.
Thanks to the voltage range of 10 to 24 volts, the LED bulb can be easily operated with electronic 12 volt ignitions.
The extra-short design means that the LED bulb fits into any headlight without touching the front glass. The LED bulb is equipped with a total of 20 diodes, with four facing the front and the remaining 16 facing the side.
The power output is 4.8 LED watts, which corresponds to around 30 bulb watts according to the rule of thumb conversion. The color temperature is specified by the manufacturer as 6000 K (Kelvin) and the brightness as 800 Lm (lumen).
Note: Despite the maximum voltage of 30 volts of the LED light source, the installation of a 12 V voltage regulator is essential for electronic ignitions, as higher voltage peaks can occur depending on the ignition.
Details
| Test mark | none |
| Color | white |
| Tension | 10 V, 12 V, 24 V, 30 V |
| Total length | 35 mm |
| Bulb holder | P26s |
| Ø base | 26 mm |
| Ø Lamp head | 15 mm |
| Resonance | Yes |
Suitable for the following models
| Universal | |
| Piaggio | Ciao - Ciao, Ciao, Ciao, Ciao Si Bravo/Superbravo Boxer Grillo |
Accessories & related products
Hot 
Leonelli 12V voltage regulator (1A quality)
Manufacturer: Leonelli · Material: Aluminum · Material: Plastic · Surface: blue galvanized · Tension: 12 V · Performance: 100 W · Type of current: Alternating current (AC) · Total length: 50 mm · Width: 27 mm · Height: 15 mm · Ø mounting hole: 6 mm · Mounting type: Screws
EUR 39,30
12V LED set (P26s) with Leonelli voltage regulator | Puch
Manufacturer: Leonelli · Test mark: none · Bulb holder: BA9s · Bulb holder: P26s · Tension: 6 V · Color: red · Color: white · Ø base: 9 mm · Ø base: 26 mm · Total length: 22 mm · Total length: 35 mm · Ø Lamp head: 9.5 mm · Ø Lamp head: 15 mm · Resonance: Yes
EUR 59,60
Moped fans like you also bought:
Hot
Leonelli 12V voltage regulator (1A quality)
Manufacturer: Leonelli · Material: Aluminum · Material: Plastic · Surface: blue galvanized · Tension: 12 V · Performance: 100 W · Type of current: Alternating current (AC) · Total length: 50 mm · Width: 27 mm · Height: 15 mm · Ø mounting hole: 6 mm · Mounting type: Screws
EUR 39,30
12V LED set (P26s) with Leonelli voltage regulator | Puch
Manufacturer: Leonelli · Test mark: none · Bulb holder: BA9s · Bulb holder: P26s · Tension: 6 V · Color: red · Color: white · Ø base: 9 mm · Ø base: 26 mm · Total length: 22 mm · Total length: 35 mm · Ø Lamp head: 9.5 mm · Ø Lamp head: 15 mm · Resonance: Yes
EUR 59,60
12V LED set with Leonelli voltage regulator | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: Leonelli · Test mark: none · Bulb holder: BA9s · Bulb holder: E10 · Bulb holder: P26s · Tension: 12 V · Color: white · Ø base: 9 mm · Ø base: 9.5 mm · Ø base: 26 mm · Total length: 22 mm · Total length: 27 mm · Total length: 35 mm · Ø Lamp head: 9.5 mm · Ø Lamp head: 15 mm · Resonance: Yes
EUR 67,50
Collection only possible with online purchase and appointment.
