Complete electronic ignition suitable for Piaggio Ciao, Si, Bravo and Boxer mopeds / mopeds.
This contactless ignition impresses with its high quality and has been extensively tested. The 800 gram flywheel also provides better acceleration values compared to the 1300 gram flywheel that is often installed.
The cables are identical to the factory-fitted ELO ignition from Piaggio.
Scope of delivery:
- Stator (armature plate) with three consumer outputs
- Flywheel 800 g
- CDI electronics box
Technical data:
- Voltage: 12 volts
- Power: 90 watts
- Yellow output: light
- Brown output: brake light (if fitted)
- Blue output: indicators (if fitted)
Advantages of the CDI ignition:
- optimal ignition timing at any engine speed
- always a strong, constant ignition spark
- no more misfiring
- ;possibility to connect several consumers
- no need to adjust the ignition
- little to no wear and tear
Note: This ignition only fits on the housing that already had an original electronic ignition installed. It also fits on racing housings such as the Polini Speed Engine or the Malossi housing for electronic ignitions. When converting your engine with 6 V breaker ignition to this 12V ignition, you must also convert the glow plug to 12V and also install a voltage regulator.
You will find a voltage regulator or 12V glow plug in the accessories section.
Good, inexpensive standard spare part. GPO – GOOD PARTS ONLY.
Original Piaggio spare part number: 219965 (stator) / 181103 (flywheel) / 244127 (CDI ignition coil)
The set includes the following fixed parts:
Manufacturer: GPO · Material: Aluminum · Direction of rotation: right · Ø Internal flywheel: 106 mm · Ø Flywheel outside: 139.5 mm · Thread type: MF17x1 (fine pitch thread) · Weight: 800 g · Alternative version of Piaggio spare part no.: 181103, 2238183
Manufacturer: GPO · Place of use: External (outside the ignition) · Ø cable holder: 7.9 mm · Cable length: 192 mm · Color: black · Total length: 95 mm · Height: 35.5 mm · Mounting type: Screws · Number of fixing points: 2 pcs · Ø mounting hole: 5.7 mm · Hole spacing: 33 mm · Area of application: Standard, Original, Performance
Details
| Manufacturer | GPO |
| Area of application | Standard, Original |
| Light coil voltage | 12 V |
| Direction of rotation | right |
| Performance | 90 W |
| Mounting type | Screws |
| Number of fixing points | 3 pcs |
| Piaggio spare part no. | 219965, 181103, 244127 |
Suitable for the following models
| Piaggio | Ciao - Ciao, Ciao, Ciao, Ciao Si Bravo/Superbravo Boxer Grillo |
Accessories & related products
Hot 
Leonelli 12V voltage regulator (1A quality)
Height: 15 mm · Width: 27 mm · Total length: 50 mm · Manufacturer: Leonelli · Material: Aluminum · Material: Plastic · Surface: blue galvanized · Mounting type: Screws · Tension: 12 V · Type of current: Alternating current (AC) · Performance: 100 W · Ø mounting hole: 6 mm
EUR 39,30
Polini Speed Engine electronic ignition housing | Piaggio Ciao, SI, Bravo, Boxer
Stock number: 6202 · Manufacturer: Polini · Material: Aluminum · Surface: sandblasted · Color: silver · Crankshaft stroke: 43 mm · Width: 175 mm · Height: 104 mm · Total length: 215 mm · Ignition type: Electronic
EUR 241,80
Malossi MP-One engine case electronic ignition | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: Malossi · Total length: 220 mm · Material: Aluminum · Width: 104 mm · Surface: sandblasted · Color: silver · Ø inside: 24 mm · Ignition type: Electronic · Ø outside: 140 mm · Height: 174 mm
EUR 259,10
Not in stock
GPO stator electronic ignition with light (three outputs) | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: GPO · Tension: 12 V · Performance: 90 W · Number of cables: 6 pcs · Cable length: 100 mm · Cable length: 400 mm · Ø inside: 29.5 mm · Ø outside: 105 mm · Number of fixing points: 3 pcs · Hole spacing: 34.5 mm · Piaggio spare part no.: 219965
EUR 135,10
swiing® revival screws set stator galvanized | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: swiing® revival parts · Area of application: Standard · Material: Steel · Surface: blue galvanized · Thread type: M5x0.8 (standard thread) · Drive: Cross recess · Screw head: Lens head · Shank: No · Thread length: 20 mm · Number of components: 6 pcs
EUR 4,40
GPO stator electronic ignition with light (one output) | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: GPO · Tension: 12 V · Performance: 90 W · Number of cables: 4 pcs · Ø outside: 105 mm · Cable length: 100 mm · Cable length: 400 mm · Hole spacing: 34.5 mm · Number of fixing points: 3 pcs
EUR 112,60
Moped fans like you also bought:
BERU spark plug connector / 1 kΩ interference suppressed
Manufacturer: BERU · Material: Sheet metal (steel) · Color: silver · Ø cable: 5 mm · Ø cable: 7 mm · Spark plug socket: M4 · Cable available: No · Suppressed: Yes · Resistance: 1000 Ω · Pony spare part no.: A2099 · Sachs spare part no.: 0265 100 00
EUR 9,85
Hot
Leonelli 12V voltage regulator (1A quality)
Height: 15 mm · Width: 27 mm · Total length: 50 mm · Manufacturer: Leonelli · Material: Aluminum · Material: Plastic · Surface: blue galvanized · Mounting type: Screws · Tension: 12 V · Type of current: Alternating current (AC) · Performance: 100 W · Ø mounting hole: 6 mm
EUR 39,30
GPO ignition coil CDI | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: GPO · Hole spacing: 33 mm · Area of application: Original · Area of application: Performance · Area of application: Standard · Color: black · Ø cable holder: 7.9 mm · Mounting type: Screws · Height: 35.5 mm · Total length: 95 mm · Cable length: 192 mm · Place of use: External (outside the ignition) · Number of fixing points: 2 pcs · Ø mounting hole: 5.7 mm
EUR 45,00
Polini Speed Engine electronic ignition housing | Piaggio Ciao, SI, Bravo, Boxer
Stock number: 6202 · Manufacturer: Polini · Material: Aluminum · Surface: sandblasted · Color: silver · Crankshaft stroke: 43 mm · Width: 175 mm · Height: 104 mm · Total length: 215 mm · Ignition type: Electronic
EUR 241,80
GPO stator electronic ignition with light (three outputs) | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: GPO · Tension: 12 V · Performance: 90 W · Number of cables: 6 pcs · Cable length: 100 mm · Cable length: 400 mm · Ø inside: 29.5 mm · Ø outside: 105 mm · Number of fixing points: 3 pcs · Hole spacing: 34.5 mm · Piaggio spare part no.: 219965
EUR 135,10
swiing® revival stud bolt set M7x120 mm cylinder | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: swiing® revival parts · Material: Steel · Surface: blue galvanized · Diameter: 6.2 mm · Thread type: M7x1 (standard thread) · Drive: External hexagon · Total length: 120 mm · Thread length: 25 mm · Strength class: 8 · Strength class: 8.8 · Width across flats SW: 11 mm
EUR 13,10
GPO flywheel 800 g full cheek shaft electronic ignition | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: GPO · Material: Aluminum · Thread type: MF17x1 (fine pitch thread) · Direction of rotation: right · Ø Internal flywheel: 106 mm · Ø Flywheel outside: 139.5 mm · Weight: 800 g · Alternative version of Piaggio spare part no.: 181103 · Alternative version of Piaggio spare part no.: 2238183
EUR 151,40
Collection only possible with online purchase and appointment.
