Sliding bush for the clutch bell or clutch drum suitable for your Puch moped / moped with E50 engine.
The bearing bush is made from a special bearing bronze. Thanks to this special material, the sliding bushing has a long service life and very good emergency running properties
Details
| Manufacturer | swiing® revival parts |
| Material | special bearing bronze |
| Ø inside | 15 mm |
| Nominal diameter | 15 mm |
| Ø outside | 17 mm |
| Total height | 21.75 mm |
Suitable for the following models
| Puch | E50 |
Accessories & related products
- 24 %
Hot 
Jammer racing clutch special 65 ccm and more | Puch E50
Ø outside: 92.5 mm · Manufacturer: Jammer · Area of application: High End · Area of application: MX · Area of application: Racing · Material: Steel · Area of application: Tuning · Surface: blue galvanized · Material addition: Steel · Number of springs: 3 pcs · Recording type: Cone mounting · Number of jaws: 3 pcs · Thickness: 19 mm
EUR 214,00
EUR 281,70
swiing® revival set thrust washers Ø 15 / 17 mm | Puch E50
Ø inside: 15 mm · Ø inside: 17 mm · Ø outside: 22 mm · Ø outside: 24 mm · Manufacturer: swiing® revival parts · Area of application: Standard · Material: Steel · Surface: hardened & ground · Thickness: 1.1 mm · Thickness: 1.3 mm · Thickness: 1.5 mm · Thickness: 1.7 mm
EUR 43,60
Plain bearing 15/17/21.75 Clutch basket "Racing" | Puch E50
Nominal diameter: 15 mm · Total height: 21.75 mm · Manufacturer: Made in Switzerland · Ø inside: 15 mm · Ø outside: 17 mm · Area of application: Racing · Area of application: Tuning · Material: special bearing bronze · Puch spare part no.: 349.1.12.011.1 · Puch spare part no.: 349.2.12.011.1
EUR 28,10
Moped fans like you also bought:
Clutch 3-jaw (aluminum) | Puch E50
Thickness: 20.9 mm · Area of application: Original · Area of application: Standard · Material: Aluminum · Material: Steel · Material addition: Composite materials · Number of springs: 3 pcs · Ø inside: 12 mm · Ø inside: 14.6 mm · Recording type: Cone mounting · Number of jaws: 3 pcs · Ø outside: 93 mm
EUR 56,20
GPO gasket set | Puch E50
Manufacturer: GPO · Material: Aluminum · Material: Fiber · Material: Sealing carton · Material: Sealing paper · Number of components: 7 pcs · Ø outlet inside: 19.9 mm · Decompressor: Yes · Hole spacing outlet: 42 mm · Hole pattern [mm]: 44 x 44 · Hole spacing inlet: 32 - 38 mm · Area of application: Standard
EUR 11,20
Not in stock
Oil filler plug with sealing ring | Puch Maxi
Material: Steel · Surface: blue galvanized · Thread type: M10x1.5 (standard thread) · Drive: Slot · Total length: 14.6 mm · Screw head: Lens head · Ø External head: 14 mm · Thread length: 6 mm · Number of components: 2 pcs · Puch spare part no.: 364.1.10.660.1
EUR 3,95
Not in stock
Motorex Automatic Motor Oil (ATF) 450 ml
Manufacturer: Motorex · Area of application: Gearbox lubrication with clutch · Oil type: ATF Dextron 3 (DEXIII) · Contents [ml]: 450 ml · Gearbox type: Automatic machine · Temperature resistance (min.): -45 - 200 °C · Pony spare part no.: A2080 · Sachs spare part no.: 0263 014 002
EUR 11,20
EUR 24,89/l
swiing® revival set stud bolts M6 x 106 mm | Puch
Diameter: 5.9 mm · Thread type: M6x1 (standard thread) · Manufacturer: swiing® revival parts · Total length: 106 mm · Material: Steel · Surface: blue galvanized · Drive: External hexagon · Thread length: 13 mm · Thread length: 18.5 mm · Width across flats SW: 10 mm · Alternative version of the Puch spare part no.: 360.1.10.034.1
EUR 8,35
Collection only possible with online purchase and appointment.
