Original crankshaft suitable for Puch Maxi S / N, as well as Supermaxi LG1 mopeds with a 1-speed E50 engine.
High-quality and precisely fitting standard crankshaft weighing 873 grams, which has proven itself in various load tests.
This crankshaft was designed for use in original engines.
The solid connecting rod is fitted with a more stable – 16 mm connecting rod bolt.
Dimensions of the crankshaft:
The needle bearing is included in the scope of delivery.
The matching bearings and oil seals can be found in the accessories section.
&Revised version of the previously offered crankshaft with improved balancing ratio and thus better speed stability.
Nostalgic product for the highest demands of the quality brand swiing®.
Details
Manufacturer | swiing® revival parts |
Material | Steel |
Area of application | Standard |
Cheek type | standard |
Crankshaft stroke | 43 mm |
Connecting rod length center-center | 90 mm |
Total length of crankpin on clutch side | 74 mm |
Weight | 873 g |
Total length crankpin ignition side | 66 mm |
Ø crank webs | 69.9 mm |
Ø Connecting rod eye | 15 mm |
Ø Bearing seat (clutch side) | 17 mm |
Thread type | MF10x1 (fine pitch thread), MF8x1 (fine pitch thread) |
Ø Bearing seat (ignition side) | 17 mm |
Thread length | 11 mm, 15 mm |
Dimension needle bearing | 12 / 15 x 14.2 mm (axe 12) |
Wide crank webs | 34 mm |
Length 1st paragraph | 9 mm |
Length 2nd paragraph | 14.5 mm |
Length 3rd paragraph | 25 mm |
Ø 1st step (on the coupling side) | 22 mm |
Ø 2nd shoulder (on the clutch side) | 17 mm |
Ø 3rd step (on the clutch side) | 15 mm |
Length of shoulder (ignition side) | 26.3 mm |
Number of gears | 1 pcs |
Suitable for the following models
Puch | E50 |
Accessories & related products
swiing® revival crankshaft standard with mounted bearings (version 2.0) | Puch E50
Manufacturer: swiing® revival parts · Area of application: Standard · Material: Steel · Cheek type: standard · Crankshaft stroke: 43 mm · Ø piston pin (B): 12 mm · Thread type: MF10x1 (fine pitch thread) · Connecting rod length center-center: 90 mm · Total length of crankpin on clutch side: 74 mm · Total length crankpin ignition side: 66 mm · Ø crank webs: 69.9 mm · Ø Connecting rod eye: 15 mm · Ø Bearing seat (clutch side): 17 mm · Ø Bearing seat (ignition side): 17 mm · Thread length: 11 mm · Thread length: 15 mm · Dimension needle bearing: 12 / 15 x 14.2 mm (axe 12) · Wide crank webs: 34 mm · Length 1st paragraph: 9 mm · Length 2nd paragraph: 14.5 mm · Length 3rd paragraph: 25 mm · Ø 1st step (on the coupling side): 22 mm · Ø 2nd shoulder (on the clutch side): 17 mm · Ø 3rd step (on the clutch side): 15 mm · Length of shoulder (ignition side): 26.3 mm · Weight: 873 g · Number of gears: 1 pcs
EUR 152,00
Elring Dirko HT sealing compound gray (silicone) 70 ml permanently elastic up to 315°C
Manufacturer: Elring · Area of application: Chemistry · Material: Silicone · Contents [ml]: 70 ml · Hazard warning: Causes damage to organs through prolonged or repeated exposure · Color: gray · Temperature resistance (min.): -60 - 315 °C · Gap dimension (max.): 2 mm
EUR 22,40
EUR 320,00/l
swiing® ingenious crankshaft High End (+1 mm stroke) (Version 2.0) | Puch E50
Manufacturer: swiing® ingenious parts · Material: Aluminum · Area of application: High End · Material: Steel · Cheek type: Full cheeks · Crankshaft stroke: 44 mm · Ø piston pin (B): 12 mm · Thread type: MF10x1 (fine pitch thread) · Connecting rod length center-center: 90 mm · Total length of crankpin on clutch side: 74 mm · Total length crankpin ignition side: 66 mm · Ø crank webs: 69.9 mm · Ø Connecting rod eye: 15 mm · Ø Bearing seat (clutch side): 17 mm · Ø Bearing seat (ignition side): 17 mm · Thread length: 11 mm · Thread length: 15 mm · Dimension needle bearing: 12 / 15 x 14.2 mm (axe 12) · Wide crank webs: 34 mm · Length 1st paragraph: 9 mm · Length 2nd paragraph: 14.5 mm · Length 3rd paragraph: 25 mm · Ø 1st step (on the coupling side): 22 mm · Ø 2nd shoulder (on the clutch side): 17 mm · Ø 3rd step (on the clutch side): 15 mm · Length of shoulder (ignition side): 26.3 mm · Weight: 970 g · Number of gears: 1 pcs
EUR 167,80
Not in stock
Dirko Dichtmasse rot (Silikon) Hochtemperatur 70 ml dauerelastisc
Manufacturer: Elring · Area of application: Chemistry · Contents [ml]: 70 ml · Hazard warning: Causes serious eye irritation · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Color: red · Temperature resistance (min.): -60 - 300 °C · Gap dimension (max.): 2 mm
EUR 25,80
EUR 368,57/l
GPO cylinder stud bolt set special M6x106 mm galvanized | Puch
Manufacturer: GPO · Material: Steel · Surface: blue galvanized · Total length: 106 mm · Drive: External hexagon · Diameter: 7 mm · Strength class: 10 · Strength class: 10.9 · Thread length: 15 mm · Thread length: 19 mm · Width across flats SW: 10 mm · Thread type: M6x1 (standard thread) · Alternative version of the Puch spare part no.: 360.1.10.034.1
EUR 22,30
DMP Crankshaft Standard | Puch E50
Manufacturer: DMP · Area of application: Standard · Material: Steel · Cheek type: standard · Crankshaft stroke: 43 mm · Ø piston pin (B): 12 mm · Thread type: MF10x1 (fine pitch thread) · Connecting rod length center-center: 90 mm · Total length of crankpin on clutch side: 74 mm · Total length crankpin ignition side: 66 mm · Ø crank webs: 69.9 mm · Ø Connecting rod eye: 15 mm · Ø Bearing seat (clutch side): 17 mm · Ø Bearing seat (ignition side): 17 mm · Thread length: 11 mm · Thread length: 14.5 mm · Dimension needle bearing: 12 / 15 x 14.2 mm (axe 12) · Wide crank webs: 34 mm · Length 1st paragraph: 9 mm · Length 2nd paragraph: 14.5 mm · Length 3rd paragraph: 25 mm · Ø 1st step (on the coupling side): 22 mm · Ø 2nd shoulder (on the clutch side): 17 mm · Ø 3rd step (on the clutch side): 15 mm · Length of shoulder (ignition side): 26.6 mm · Weight: 873 g · Number of gears: 1 pcs
EUR 95,70
Moped fans like you also bought:
Clutch 3-jaw (aluminum) | Puch E50
Area of application: Original · Area of application: Standard · Material: Aluminum · Material: Steel · Material addition: Composite materials · Recording type: Cone mounting · Ø inside: 12 mm · Ø inside: 14.6 mm · Ø outside: 93 mm · Number of jaws: 3 pcs · Number of springs: 3 pcs · Thickness: 20.9 mm
EUR 56,20
GPO gasket set | Puch E50
Manufacturer: GPO · Area of application: Standard · Material: Aluminum · Material: Fiber · Material: Sealing carton · Material: Sealing paper · Number of components: 7 pcs · Ø outlet inside: 19.9 mm · Hole spacing outlet: 42 mm · Hole pattern [mm]: 44 x 44 · Decompressor: Yes · Hole spacing inlet: 32 - 38 mm
EUR 11,20
Oil filler plug with sealing ring | Puch Maxi
Material: Steel · Surface: blue galvanized · Thread type: M10x1.5 (standard thread) · Drive: Slot · Total length: 14.6 mm · Screw head: Lens head · Ø External head: 14 mm · Thread length: 6 mm · Number of components: 2 pcs · Puch spare part no.: 364.1.10.660.1
EUR 3,95
Not in stock
Motorex Automatic Motor Oil (ATF) 450 ml
Temperature resistance (min.): -45 - 200 °C · Manufacturer: Motorex · Area of application: Gearbox lubrication with clutch · Oil type: ATF Dextron 3 (DEXIII) · Contents [ml]: 450 ml · Gearbox type: Automatic machine · Pony spare part no.: A2080 · Sachs spare part no.: 0263 014 002
EUR 11,20
EUR 24,89/l
swiing® revival set stud bolts M6 x 106 mm | Puch
Manufacturer: swiing® revival parts · Material: Steel · Surface: blue galvanized · Total length: 106 mm · Drive: External hexagon · Diameter: 5.9 mm · Thread length: 13 mm · Thread length: 18.5 mm · Width across flats SW: 10 mm · Thread type: M6x1 (standard thread) · Alternative version of the Puch spare part no.: 360.1.10.034.1
EUR 8,35