Set
Hot 
First 41 mm tuning cylinder kit with diaphragm intake suitable for Swiss Sachs 50/2 (502) mopeds / mopeds.
With a larger displacement and optimized timing, this tuning kit turns your oldie into a powerhouse. In addition, this racing cylinder is visually indistinguishable from the original cylinder when fitted.
The cylinder kit is characterized by the following attributes:
- Cast iron reproduction cylinder with 41 mm bore
- Membrane control
- Optimized overflow channels
- Improved control times
- Pore-clean surface
Exhaust thread: M35 x 2 mm
The scope of delivery includes cylinder, piston kit, gasket set and intake studs
Please note that this cylinder does not fit under the louvre casing of a slotted Sachs of the same type
Matching add-on parts, as well as the more compact 38 mm tuning cylinder, can be found in the accessories section.
Please select in the selection field whether you would like the cylinder kit with or without gasket set.
Exclusive product for the highest demands of the quality brand swiing®.
The set includes the following fixed parts:
Hole pattern [mm]: 60 x 40 / 37 x 37 · Inlet window: 57.5 x 19 · Manufacturer: swiing · Material: Gray cast iron · Surface: sandblasted · Displacement: 55 ccm · Crankshaft stroke: 42 mm · Nominal diameter: 41 mm · Ø cylinder neck: 44 mm · Ø Outlet outside: 35 mm · Ø outlet inside: 26 mm · Ø Inlet inside: 19 mm · Thread inlet: M5x0.8 (standard thread) · Hole spacing inlet: 68 mm · Ø piston pin (B): 12 mm · Outlet type: Union nut · Thread outlet: M35x2 (standard thread) · Number of fixing points: 4 pcs · Camouflaged: Yes · Area of application: Tuning
Manufacturer: swiing® revival parts · Material: Steel · Surface: blue galvanized · Area of application: Standard · Diameter: 4.9 mm · Thread type: M5x0.8 (standard thread) · Total length: 23 mm · Thread length: 6 mm, 12 mm · Pony spare part no.: A3700 · Sachs spare part no.: 0640 016 101, 0640 016 102
Manufacturer: GPO · Nominal diameter: 40 mm · Ø outside piston (A): 40.94 mm · Ø piston pin (B): 12 mm · Compression height (C): 28 mm · Curvature (D): 3.2 mm · Total piston height (E): 49.4 mm · Number of piston rings (F): 2 pcs · Piston ring mold: Rectangular ring · Piston ring impact: Internal fuse (IS) · Piston ring height: 1.5 mm · Thick piston ring: 1.8 mm
Details
| Nominal diameter | 41 mm |
| Manufacturer | swiing® ingenious parts, GPO |
| Material | Gray cast iron |
| Surface | sandblasted |
| Displacement | 55 ccm |
| Crankshaft stroke | 42 mm |
| Ø cylinder neck | 44 mm |
| Ø Outlet outside | 35 mm |
| Ø outlet inside | 26 mm |
| Ø Inlet inside | 19 mm |
| Inlet window | 57.5 x 19 |
| Thread inlet | M5x0.8 (standard thread) |
| Hole spacing inlet | 68 mm |
| Ø piston pin (B) | 12 mm |
| Outlet type | Union nut |
| Number of fixing points | 4 pcs |
| Thread outlet | M35x2 (standard thread) |
| Hole pattern [mm] | 60 x 40 / 37 x 37 |
| Camouflaged | Yes |
| Area of application | Tuning |
Suitable for the following models
| Sachs | 502 (Saxonette) - AML 50/2 - ML CH (0.8 PS), MB (2.6 PS), MLB (2.6 PS) |
Accessories & related products
Diaphragm insert Sachs 50/2
Material: Brass · Area of application: Standard · Mounting type: Screws · Number of flaps: 2 pcs · Membrane material: Spring steel · Number of fixing points: 2 pcs · Hole spacing: 67 mm · Ø mounting hole: 5.2 mm · Pony spare part no.: A2624 · Sachs spare part no.: 0286 213 010
EUR 32,60
Carburetor 17 mm Bing SSB 1/17/69 reproduction
Nominal diameter: 17 mm · Material: Aluminum · Camouflaged: No · Area of application: Standard · Area of application: Tuning · Carburetor type: SSB · Mounting type: Stud bolts & nuts · Width: 86 mm · Height: 99 mm · Hole spacing inlet: 31 mm · Total length: 116 mm · Nozzle thread: M7x0.75 · Nozzle size: 76 · Ø fuel hose connection: 6.2 mm · Mixed oil connection: No · Vacuum connection: Yes · Choke control: without choke · Clamping screw torque (max.): 3 N/m · Clamping screw torque (max.): 4 N/m
EUR 90,10
EUR 101,30
swiing® revival stud bolt M5 x 23 mm inlet (diaphragm) 10.9 | Sachs 50/2 (A3700)
Diameter: 4.9 mm · Total length: 23 mm · Manufacturer: swiing® revival parts · Area of application: Standard · Material: Steel · Surface: blue galvanized · Thread type: M5x0.8 (standard thread) · Thread length: 6 mm · Thread length: 12 mm · Pony spare part no.: A3700 · Sachs spare part no.: 0640 016 101 · Sachs spare part no.: 0640 016 102
EUR 2,05
swiing® revival set screws cylinder head Inox | Sachs 503 / 50/2 / 50/3 / 50/4
Manufacturer: swiing® revival parts · Material: Chrome steel (stainless steel) · Area of application: Standard · Thread type: M6x1 (standard thread) · Drive: External hexagon · Total length: 34 mm · Screw head: Hexagon · Shank: Yes · Ø shaft: 5.85 mm · Shank length: 8 mm · Thread length: 22 mm · Width across flats SW: 10 mm · Number of components: 12 pcs
EUR 8,35
- 16 %
Hot
swiing® ingenious intermediate flange 17 mm diaphragm | Sachs 502, 50/2, 50/3, 50/4
Ø inside: 17 mm · Manufacturer: swiing® ingenious parts · Hole spacing: 31 mm · Hole spacing: 67 mm · Material: Aluminum · Material: Steel · Area of application: Tuning · Surface: anodized · Surface: blue galvanized · Mounting type: Screws · Number of flaps: 2 pcs · Width: 80 mm · Thread type: M5x0.8 (standard thread) · Total length: 29 mm · Thickness: 6.9 mm · Number of fixing points: 4 pcs
EUR 56,20
EUR 67,50
swiing® revival gasket set cylinder with head gasket diaphragm version | Sachs 50/2
Manufacturer: swiing® revival parts · Area of application: Standard · Number of components: 6 pcs · Ø cylinder: 38 mm · Hole spacing inlet: 31 mm · Hole spacing inlet: 67 - 31 mm · Ø outlet inside: 28 mm · Hole pattern [mm]: 60 x 40 mm / 37 x 37 mm
EUR 21,90
GPO piston 40.94 mm | Sachs 502, 50/2, 50/3, 50/4
Nominal diameter: 40 mm · Manufacturer: GPO · Ø outside piston (A): 40.94 mm · Ø piston pin (B): 12 mm · Compression height (C): 28 mm · Curvature (D): 3.2 mm · Total piston height (E): 49.4 mm · Number of piston rings (F): 2 pcs · Piston ring mold: Rectangular ring · Piston ring impact: Internal fuse (IS) · Piston ring height: 1.5 mm · Thick piston ring: 1.8 mm
EUR 45,00
swiing 41 mm tuning set diaphragm | Sachs 50/2 (CH)
Nominal diameter: 41 mm · Manufacturer: GPO · Manufacturer: NGK · Manufacturer: swiing · Manufacturer: swiing® ingenious parts · Manufacturer: swiing® revival parts · Displacement: 55 ccm · Crankshaft stroke: 42 mm · Thread inlet: M5x0.8 (standard thread) · Hole spacing inlet: 31 mm · Ø piston pin (B): 12 mm · Outlet type: Union nut · Thread outlet: M35x2 (standard thread) · Hole pattern [mm]: 60 x 40 · Decompressor: No · Camouflaged: Yes · Area of application: Tuning
EUR 732,50
Not in stock
swiing® ingenious cylinder head gasket 41 mm | Sachs 503, 502, 50/2, 50/3, 50/4
Manufacturer: swiing® ingenious parts · Thickness: 0.3 mm · Area of application: Standard · Material: Aluminum · Place of use: Cylinder head · Ø cylinder: 41 mm · Ø inside: 41.7 mm · Nominal diameter: 41 mm · Hole pattern [mm]: 37 x 37
EUR 5,50
Not in stock
Moped fans like you also bought:
NSK E15 shoulder ball bearing 15/35/8 (A1149)
Bearing type: Shoulder bearing · Stock number: E15 · Inner ring width: 8 mm · Manufacturer: NSK · Ball bearing closed: No · Bearing clearance: CN (standard) · Bearing cage: Brass cage ball-guided · Groove ring: No · Area of application: Standard · Material: Brass · Material: Steel · Width: 8 mm · Surface: blank · Ø inside: 15 mm · Ø outside: 35 mm · Pony spare part no.: A1149 · Sachs spare part no.: 0232 017 006
EUR 28,10
swiing® revival stud bolt M5 x 23 mm inlet (diaphragm) 10.9 | Sachs 50/2 (A3700)
Diameter: 4.9 mm · Total length: 23 mm · Manufacturer: swiing® revival parts · Area of application: Standard · Material: Steel · Surface: blue galvanized · Thread type: M5x0.8 (standard thread) · Thread length: 6 mm · Thread length: 12 mm · Pony spare part no.: A3700 · Sachs spare part no.: 0640 016 101 · Sachs spare part no.: 0640 016 102
EUR 2,05
Gasket set with oil seals Diaphragm version | Sachs 50/2
Area of application: Standard · Number of components: 16 pcs · Ø outlet inside: 28 mm · Hole pattern [mm]: 60 x 40 · Hole spacing inlet: 31 mm · Hole spacing inlet: 67 - 31 mm · Pony spare part no.: A2548 · Sachs spare part no.: 0286 125 021
EUR 45,00
Gasket cylinder base 0.5 mm | Sachs 50/2, 503
Material: Sealing carton · Area of application: Standard · Thickness: 0.5 mm · Place of use: Cylinder base · Hole pattern [mm]: 60 x 40 · Alternative version of the Pony Spare part no.: A1848 · Alternative version of Sachs spare part no.: 0250 113 100
EUR 4,40
GPO piston 40.94 mm | Sachs 502, 50/2, 50/3, 50/4
Nominal diameter: 40 mm · Manufacturer: GPO · Ø outside piston (A): 40.94 mm · Ø piston pin (B): 12 mm · Compression height (C): 28 mm · Curvature (D): 3.2 mm · Total piston height (E): 49.4 mm · Number of piston rings (F): 2 pcs · Piston ring mold: Rectangular ring · Piston ring impact: Internal fuse (IS) · Piston ring height: 1.5 mm · Thick piston ring: 1.8 mm
EUR 45,00
swiing® revival gasket set cylinder diaphragm version | Sachs 50/2
Manufacturer: swiing® revival parts · Material: Copper · Material: Sealing paper · Area of application: Standard · Number of components: 5 pcs · Ø cylinder: 38 mm · Hole spacing inlet: 31 mm · Hole spacing inlet: 67 - 31 mm · Ø outlet inside: 28 mm · Hole pattern [mm]: 60 x 40 mm
EUR 14,90
swiing® revival ball bearing countershaft | Sachs 50/2, 50/3, 50/4, 503 2AL/2BL (A2531)
Bearing type: Deep groove ball bearing · Stock number: E15 · Thread type: MF20.8x1 LH (fine/left-hand thread) · Inner ring width: 25.6 mm · Manufacturer: swiing® revival parts · Bearing clearance: CN (standard) · Bearing cage: "-" Sheet steel cage ball-guided · Area of application: High End · Area of application: Standard · Material: Steel · Width: 8 mm · Ø inside: 15 mm · Ø outside: 35 mm · Pony spare part no.: A2531 · Sachs spare part no.: 0286 079 105
EUR 56,20
Collection only possible with online purchase and appointment.
