Hot 
17 mm racing carburetor for Sachs 503 AAL, 2AL/2BL, ABL, AB, AC, ADV engines, as well as other mopeds / mopeds which are originally fitted with a Bing 17 & 18 carburetor and have the idle throttle screw on the right-hand side of the carburetor (in the direction of travel). The tuning carburetor is also used if you use a mushroom air filter on your 503 engine. On all ADV models, the connection dimensions also fit the intake manifold and the air filter.
World first: The tuning carburetor is made up of the slide tower of the SRF 17 mm carburetor and the base of the SRE carburetor. This achieves a passage of 17 mm with an almost original appearance. A special intake manifold with a 23 mm connection diameter is required.
For perfect camouflage, the tuning carburetor is provided with the original number «1/12/327». This means that the carburetor is practically indistinguishable from the original when fitted.
Installed throttle body size: 74
Installed throttle body stock: 2.20, suitable for M3.5 nozzles
Ø Air filter connection: 28 mm
Ø Intake manifold connection: 23 mm
Maximum tightening torque on the clamping screw: 3-4 Nm
Total length: 61.5 mm
Height from center of passage: 45 mm
Total height (without choke pin & pipe bend): 89 mm
You can find the corresponding intake manifold, a matching nozzle set and various attachments in the accessories section.
Exceptional product for the highest demands of the quality brand swiing®.
Details
| Manufacturer | swiing® ingenious parts |
| Mounting type | Plug connection clamped |
| Area of application | Tuning |
| Material | Aluminum |
| Surface | raw |
| Total length | 64.8 mm |
| Carburetor type | SRE |
| Width | 47 mm |
| Height | 110 mm, 89 mm |
| Nominal diameter | 17 mm |
| Ø Internal connection | 23 mm |
| Ø Inside entrance | 17 mm |
| Ø Output inside | 17.1 mm |
| Ø Air filter connection | 27.5 mm |
| Ø fuel hose connection | 5 mm |
| Mixed oil connection | No |
| Vacuum connection | No |
| Choke control | Hand choke |
| Nozzle thread | M3.5 |
| Nozzle block | 2.2 |
| Nozzle size | 74 |
| Camouflaged | Yes |
| Clamping screw torque (max.) | 3 N/m |
Suitable for the following models
| Universal | |
| Sachs |
Accessories & related products
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø Stranded wire: 1.25 mm · Cable length: 2200 mm · Nipple shape: Cylinder · Ø nipple: 3 mm · Nipple length: 5 mm · Manufacturer: Made in Germany · Area of application: Standard · Material: Steel · Surface: blue galvanized · Number of components: 1 pcs
EUR 3,15
swiing nozzle set M3.5 (54 - 64) Bing SRE, SRA, SRC, SRF
Manufacturer: swiing · Material: Brass · Quantity: 6 pcs · Carburetor type: SRA (1/11/31) Velux · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Nozzle type: Main nozzle · Drive: Slot · Total length: 6 mm · Nozzle thread: M3.5 · Nozzle size: 54 · Nozzle size: 56 · Nozzle size: 58 · Nozzle size: 60 · Nozzle size: 62 · Nozzle size: 64
EUR 17,90
swiing nozzle set M3.5 (64 - 74) Bing SRE, SRA, SRC, SRF
Manufacturer: swiing · Material: Brass · Quantity: 6 pcs · Carburetor type: SRA (1/11/31) Velux · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Nozzle type: Main nozzle · Drive: Slot · Total length: 6 mm · Nozzle thread: M3.5 · Nozzle size: 64 · Nozzle size: 66 · Nozzle size: 68 · Nozzle size: 70 · Nozzle size: 72 · Nozzle size: 74
EUR 17,90
Mushroom air filter foam black, Dell'Orto PHBG (Ø=32 mm)
Material: Foam · Material: Rubber · Area of application: Tuning · Filter type: Foam · Ø outside: 60 mm · Ø Internal connection: 28 mm · Ø Internal connection: 32 mm · Total length: 110 mm · Mounting type: Plug connection clamped · Camouflaged: No · Color: black
EUR 14,50
swiing nozzle set M3.5 (50 - 60) Bing SRE, SRA, SRC, SRF
Manufacturer: swiing · Material: Brass · Quantity: 11 pcs · Carburetor type: SRA (1/11/31) Velux · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Nozzle type: Main nozzle · Drive: Slot · Total length: 6 mm · Nozzle thread: M3.5 · Nozzle size: 50 · Nozzle size: 51 · Nozzle size: 52 · Nozzle size: 53 · Nozzle size: 54 · Nozzle size: 55 · Nozzle size: 56 · Nozzle size: 57 · Nozzle size: 58 · Nozzle size: 59 · Nozzle size: 60
EUR 24,70
66HEROES Mushroom air filter grille 28 - 32 mm black
Manufacturer: 66HEROES · Material: Metal · Material: Rubber · Area of application: Tuning · Filter type: Grille · Ø outside: 60 mm · Ø Internal connection: 28 mm · Ø Internal connection: 32 mm · Total length: 114 mm · Mounting type: Plug connection clamped · Camouflaged: No · Color: black
EUR 17,90
Not in stock
Hot
BAD ASS intake manifold 17 mm SRF short version | Sachs 503 2AL, 2BL
Manufacturer: BAD ASS · Material: Aluminum · Thread type: M6x1 (standard thread) · Ø inside: 17 mm · Ø External connection: 23 mm · Hole spacing inlet: 32 mm · Total length: 54 mm · Mounting type: Screws · Total height: 56.5 mm · Height flange center hole: 45 mm · Number of fixing points: 3 pcs · Area of application: Tuning · Camouflaged: No
EUR 84,40
swiing® revival carburetor revision set Bing SRF & SRF Tuning 17 mm
Manufacturer: swiing® revival parts · Material: Aluminum · Material: Brass · Material: Plastic · Material: Sealing carton · Material: Sealing paper · Material: Spring steel · Material: Steel · Surface: blank · Surface: raw · Carburetor type: SRE · Ø Passage: 17 mm · Color: black · Color: brown · Color: silver
EUR 50,60
swiing® ingenious intake manifold 17 mm SRF | Puch E50
Manufacturer: swiing® ingenious parts · Material: Aluminum · Total length: 38 mm · Ø inside: 17 mm · Hole spacing inlet: 38 mm · Height flange center hole: 42 mm · Total height: 53.5 mm · Mounting type: Stud bolts & nuts · Ø External connection: 23 mm · Camouflaged: Yes · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Number of fixing points: 2 pcs
EUR 50,60
swiing® ingenious intake manifold 17 mm SRF | Puch Z50
Manufacturer: swiing® ingenious parts · Material: Aluminum · Total length: 45 mm · Ø inside: 17 mm · Hole spacing inlet: 38 mm · Height flange center hole: 61 mm · Total height: 73 mm · Mounting type: Stud bolts & nuts · Ø External connection: 23 mm · Camouflaged: Yes · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Number of fixing points: 2 pcs
EUR 56,20
Moped fans like you also bought:
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø Stranded wire: 1.25 mm · Cable length: 2200 mm · Nipple shape: Cylinder · Ø nipple: 3 mm · Nipple length: 5 mm · Manufacturer: Made in Germany · Area of application: Standard · Material: Steel · Surface: blue galvanized · Number of components: 1 pcs
EUR 3,15
swiing nozzle set M3.5 (76 - 86) Bing SRE, SRA, SRC, SRF
Manufacturer: swiing · Material: Brass · Quantity: 6 pcs · Carburetor type: SRA (1/11/31) Velux · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Nozzle type: Main nozzle · Drive: Slot · Total length: 6 mm · Nozzle thread: M3.5 · Nozzle size: 76 · Nozzle size: 78 · Nozzle size: 80 · Nozzle size: 82 · Nozzle size: 84 · Nozzle size: 86
EUR 17,90
NSK BO15 shoulder ball bearing 15/40/10 (A4502)
Bearing cage: Brass cage ball-guided · Stock number: BO15 · Width: 10 mm · Inner ring width: 10 mm · Manufacturer: NSK · Material: Brass · Area of application: Standard · Material: Steel · Bearing type: Shoulder bearing · Surface: blank · Ø outside: 40 mm · Ø inside: 15 mm · Ball bearing closed: No · Pony spare part no.: A4502 · Sachs spare part no.: 0932 007 001
EUR 28,10
swiing® revival air filter Racing | Sachs 503
Manufacturer: swiing® revival parts · Mounting type: Plug connection clamped · Material: Plastic · Area of application: Tuning · Color: black · Total length: 165 mm · Filter type: Racing screen · Ø Internal connection: 20 mm · Width: 68 mm · Height: 52 mm · Camouflaged: No
EUR 67,50
Hot
BAD ASS intake manifold 17 mm SRF short version | Sachs 503 2AL, 2BL
Manufacturer: BAD ASS · Material: Aluminum · Thread type: M6x1 (standard thread) · Ø inside: 17 mm · Ø External connection: 23 mm · Hole spacing inlet: 32 mm · Total length: 54 mm · Mounting type: Screws · Total height: 56.5 mm · Height flange center hole: 45 mm · Number of fixing points: 3 pcs · Area of application: Tuning · Camouflaged: No
EUR 84,40
BAD ASS 17 mm intake manifold (short) Bing SRE | Sachs 503 2AL/2BL
Manufacturer: BAD ASS · Material: Aluminum · Area of application: Tuning · Ø inside: 17.8 mm · Ø External connection: 20 mm · Number of fixing points: 2 pcs · Total length: 65 mm · Total height: 55 mm · Height flange center hole: 45 mm · Hole spacing inlet: 32 mm · Mounting type: Stud bolt · Camouflaged: No
EUR 84,40
GPO cylinder gasket set BAD ASS Pandora 41 & 43 mm | Sachs 503, 50/2, 502
Manufacturer: GPO · Material: Oiled paper · Ø cylinder: 41 mm · Ø cylinder: 43 mm · Number of components: 2 pcs · Thickness: 0.3 mm · Thickness: 1 mm · Hole spacing inlet: 32 mm · Hole pattern [mm]: 60 x 40 mm / 37 x 37 mm · Area of application: Tuning
EUR 16,20
Collection only possible with online purchase and appointment.
