Additional weight made of stainless steel suitable for HPI ignitions from Sachs 503, Puch X30 Velux, as well as Zündapp Belmondo mopeds with blower.
The weight is mounted underneath the blower wheel in the accessory.
The weight is mainly used to increase the flywheel mass.
The additional weight makes the engine run more smoothly when stationary and makes starting easier without stalling the engine, which is often the case with a lighter flywheel.
Exceptional product for the highest demands of the swiing® quality brand.
Details
| Manufacturer | swiing® ingenious parts |
| Area of application | Performance, Racing, High End, Tuning |
| Material | Chrome steel (stainless steel) |
| Surface | blank |
| Thickness | 1.8 mm |
| Ø inside | 71.8 mm |
| Number of fixing points | 4 pcs |
| Ø outside | 117 mm |
| Ø bolt circle | 101 mm |
| Ø mounting hole | 5 mm |
| Weight | 100 g |
Suitable for the following models
| Universal | |
| Puch | ZA50 (Gebläsegekühlt) Z50 (X30 Velux) |
| Sachs | 503 - AAL, ABL, 2AL / 2BL, AB, AC, ADV |
| Pony / Cilo (Beta 521 & 512) | Beta 512 Beta diverse Beta 521 (Motor) |
| Zündapp Belmondo |
Accessories & related products
HPI racing ignition 12V with light 60W
Ø cable: 7 mm · Manufacturer: HPI · Material: Aluminum · Material: Steel · Tension: 12 V · Light coil voltage: 12 V · Performance: 60 W · Direction of rotation: left · Direction of rotation: right · Ø mounting plate: 90 mm · Ø Internal flywheel: 61.5 mm · Ø Flywheel outside: 71.5 mm · Number of fixing points: 6 pcs · Mounting type: Screws · Area of application: Tuning · Weight: 340 g
EUR 351,60
HPI racing ignition clockwise without light
Manufacturer: HPI · Material: Aluminum · Material: Steel · Area of application: Tuning · Ø cable: 7 mm · Direction of rotation: left · Direction of rotation: right · Ø mounting plate: 90 mm · Ø Flywheel outside: 62 mm · Mounting type: Screws · Number of fixing points: 3 pcs · Weight: 424 g
EUR 328,10
HPI flywheel (Bosch/Ducati)
Manufacturer: HPI · Material: Steel · Thread type: MF27x1 LH (fine/left-hand thread) · Direction of rotation: left · Direction of rotation: right · Ø cone small inside: 10.9 mm · Ø cone large inside: 15.8 mm · Cone length: 28 mm · Cone ratio: 1:5 · Ø Flywheel outside: 71.5 mm
EUR 112,40
HPI stator ignition
Manufacturer: HPI · Material: Aluminum · Surface: anodized · Tension: 12 V · Ø inside: 27.5 mm · Performance: 60 W · Number of cables: 4 pcs · Cable length: 640 mm · Ø outside: 90 mm · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Ø bolt circle: 80 mm · Number of fixing points: 6 pcs · Color: black
EUR 175,70
swiing® ingenious fan wheel black (EVO, HPI, Bosch,Ducati) | Puch X30 Velux / Sachs 503 / Belmondo
Manufacturer: swiing® ingenious parts · Material: Aluminum · Surface: anodized · Color: black · Ø outside: 120 mm · Ø inside: 39 mm · Ø mounting hole: 5.5 mm · Ø mounting hole: 6 mm · Height: 13.5 mm · Number of fixing points: 10 pcs · Weight: 87 g · Ø bolt circle: 48 mm · Ø bolt circle: 70 mm · Ø bolt circle: 100 mm
EUR 70,20
swiing® ingenious 250 g additional weight HPI Inox | Puch X30 Velux / Sachs 503 / Belmondo
Manufacturer: swiing® ingenious parts · Material: Chrome steel (stainless steel) · Surface: blank · Ø outside: 117 mm · Ø inside: 71.8 mm · Thickness: 5 mm · Ø mounting hole: 5 mm · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Number of fixing points: 4 pcs · Weight: 250 g · Ø bolt circle: 101 mm
EUR 30,30
Hot 
HPI ignition box programmable (two ignition curves)
Manufacturer: HPI · Material: Plastic · Color: red · Width: 100 mm · Total length: 63 mm · Ø mounting hole: 7.5 mm · Height: 28 mm · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Number of fixing points: 2 pcs · Hole spacing: 80 mm
EUR 360,40
Moped fans like you also bought:
BERU spark plug connector / 1 kΩ interference suppressed
Ø cable: 5 mm · Ø cable: 7 mm · Manufacturer: BERU · Material: Sheet metal (steel) · Color: silver · Spark plug socket: M4 · Cable available: No · Suppressed: Yes · Resistance: 1000 Ω · Pony OEM number: A2099 · Sachs OEM number: 0265 100 00
EUR 10,30
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø nipple: 3 mm · Manufacturer: Made in Germany · Area of application: Standard · Material: Steel · Surface: galvanized (blue) · Number of components: 1 pcs · Ø Stranded wire: 1.25 mm · Nipple shape: Cylinder · Cable length: 2200 mm · Nipple length: 5 mm
EUR 3,30
Motorex engine oil (gear oil) manual 450 ml
Temperature resistance (min.): -30 - 220 °C · Manufacturer: Motorex · Viscosity (SAE): 80W · Area of application: Gearbox lubrication with clutch · Oil type: GL4 · Contents [ml]: 450 ml · Gearbox type: Foot control · Gearbox type: Manual gearshift
EUR 11,60
EUR 25,78/l
HPI racing ignition 12V with light 60W
Ø cable: 7 mm · Manufacturer: HPI · Material: Aluminum · Material: Steel · Tension: 12 V · Light coil voltage: 12 V · Performance: 60 W · Direction of rotation: left · Direction of rotation: right · Ø mounting plate: 90 mm · Ø Internal flywheel: 61.5 mm · Ø Flywheel outside: 71.5 mm · Number of fixing points: 6 pcs · Mounting type: Screws · Area of application: Tuning · Weight: 340 g
EUR 351,60
swiing® ingenious fan wheel black (EVO, HPI, Bosch,Ducati) | Puch X30 Velux / Sachs 503 / Belmondo
Manufacturer: swiing® ingenious parts · Material: Aluminum · Surface: anodized · Color: black · Ø outside: 120 mm · Ø inside: 39 mm · Ø mounting hole: 5.5 mm · Ø mounting hole: 6 mm · Height: 13.5 mm · Number of fixing points: 10 pcs · Weight: 87 g · Ø bolt circle: 48 mm · Ø bolt circle: 70 mm · Ø bolt circle: 100 mm
EUR 70,20
swiing® ingenious 250 g additional weight HPI Inox | Puch X30 Velux / Sachs 503 / Belmondo
Manufacturer: swiing® ingenious parts · Material: Chrome steel (stainless steel) · Surface: blank · Ø outside: 117 mm · Ø inside: 71.8 mm · Thickness: 5 mm · Ø mounting hole: 5 mm · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Number of fixing points: 4 pcs · Weight: 250 g · Ø bolt circle: 101 mm
EUR 30,30
HPI racing ignition set 12V with light 60W | Puch X30 Velux / Sachs 503 / Zündapp Belmondo
Manufacturer: HPI · Manufacturer: swiing · Tension: 12 V · Performance: 60 W · Direction of rotation: left · Direction of rotation: right · Ø mounting plate: 90 mm · Ø cable: 7 mm · Area of application: Tuning
EUR 439,50
swiing® ingenious fan wheel red (EVO, HPI, Bosch, Ducati) | Puch X30 Velux / Sachs 503 / Belmondo
Manufacturer: swiing® ingenious parts · Material: Aluminum · Surface: anodized · Color: red · Ø outside: 120 mm · Ø inside: 39 mm · Ø mounting hole: 6 mm · Height: 13.5 mm · Number of fixing points: 10 pcs · Weight: 87 g · Ø bolt circle: 48 mm · Ø bolt circle: 70 mm · Ø bolt circle: 100 mm
EUR 73,10
Collection only possible with online purchase and appointment.
