Complete set 12V HPI ignition with built-in 60W light coil and fan wheel.
Fits Puch X30 Velux, Sachs 503 and Zündapp Belmondo mopeds.
The CNC machined idler wheel from the quality brand "swiing" - swiss ingenious ensures optimum cooling of the cylinder.
The two additional weights (100 / 250 grams) are used to increase the flywheel mass so that the engine runs more smoothly when stationary and starting off is easier.
Depending on the area of application, the flywheel is fitted with 100, 250 or 350 grams (both discs together). 350 grams (both pulleys together).
Advantages of the HPI ignition:
- Always a constant, strong spark
- No more misfires
- Adjust once and never again
- Little to no wear
The scope of delivery includes assembly instructions in German.
When you purchase this complete set, you will receive a substantial percentage off the retail price of the individual parts.
Caution:
Do not use screws that are too long when mounting the impeller, otherwise the stator winding may be damaged. A suitable screw set is included in the scope of delivery.Branded product from the manufacturer HPI – Horse Power Ignition.
The set includes the following fixed parts:
Manufacturer: swiing® ingenious parts · Material: Chrome steel (stainless steel) · Surface: blank · Weight: 250 g · Ø inside: 71.8 mm · Ø outside: 117 mm · Ø bolt circle: 101 mm · Number of fixing points: 4 pcs · Ø mounting hole: 5 mm · Thickness: 5 mm · Area of application: Performance, Racing, High End, Tuning
Manufacturer: HPI · Material: Steel, Aluminum · Tension: 12 V · Light coil voltage: 12 V · Performance: 60 W · Direction of rotation: left, right · Ø mounting plate: 90 mm · Ø Internal flywheel: 61.5 mm · Ø Flywheel outside: 71.5 mm · Ø cable: 7 mm · Mounting type: Screws · Number of fixing points: 6 pcs · Weight: 340 g · Area of application: Tuning
Manufacturer: swiing® ingenious parts · Material: Aluminum · Surface: anodized · Color: black · Ø outside: 120 mm · Ø inside: 39 mm · Ø mounting hole: 6 mm, 5.5 mm · Ø bolt circle: 48 mm, 70 mm, 100 mm · Number of fixing points: 10 pcs · Height: 13.5 mm · Weight: 87 g
Manufacturer: swiing® ingenious parts · Material: Chrome steel (stainless steel) · Surface: blank · Weight: 100 g · Ø inside: 71.8 mm · Ø outside: 117 mm · Ø bolt circle: 101 mm · Number of fixing points: 4 pcs · Ø mounting hole: 5 mm · Thickness: 1.8 mm · Area of application: Performance, Racing, High End, Tuning
Manufacturer: swiing® revival parts · Material: Chrome steel (stainless steel) · Thread type: M6x1 (standard thread) · Drive: Slot · Number of components: 6 pcs
Details
| Manufacturer | HPI, swiing |
| Area of application | Tuning |
| Ø cable | 7 mm |
| Tension | 12 V |
| Direction of rotation | left, right |
| Performance | 60 W |
| Ø mounting plate | 90 mm |
Suitable for the following models
| Puch | ZA50 (Gebläsegekühlt) Z50 (X30 Velux) |
| Sachs | 502 (Saxonette) - AL, AML 50/2 - L CH (0.8 PS), ML CH (0.8 PS), MB (2.6 PS), MLB (2.6 PS) 50/3 50/4 - MLFB (2.6 PS), LKH (4.5 PS) 503 - AAL, ABL, 2AL / 2BL |
| Zündapp Belmondo |
Accessories & related products
BERU spark plug connector / 1 kΩ interference suppressed
Manufacturer: BERU · Material: Sheet metal (steel) · Color: silver · Ø cable: 5 mm · Ø cable: 7 mm · Spark plug socket: M4 · Cable available: No · Suppressed: Yes · Resistance: 1000 Ω · Pony spare part no.: A2099 · Sachs spare part no.: 0265 100 00
EUR 9,85
Moped fans like you also bought:
Dell'Orto 19 mm PHBG CS carburetor hand choke
Manufacturer: Dell'Orto · Camouflaged: No · Material: Aluminum · Color: black · Carburetor type: PHBG CS · Total length: 82 mm · Choke control: Hand choke · Ø fuel hose connection: 5.4 mm · Ø fuel hose connection: 6 mm · Nominal diameter: 19 mm · Area of application: Racing · Area of application: Tuning · Ø without reducing sleeve: 26 mm · Nozzle size: 75 · Ø Inside entrance: 19 mm · Width: 70 mm · Ø Output inside: 19 mm · Height: 124 mm · Nozzle thread: M5x0.8 (standard thread) · Ø Air filter connection: 32 mm · Ø Air filter connection: 60 mm · Air filter connection thread: MF32x1.25 (fine pitch thread) · Ø Internal connection: 24 mm · Mixed oil connection: Yes · Mounting type: Plug connection clamped · Vacuum connection: Yes · Choke nozzle size: 60 · Size of secondary nozzle: 45
EUR 135,10
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø nipple: 3 mm · Nipple length: 5 mm · Manufacturer: Made in Germany · Area of application: Standard · Material: Steel · Surface: galvanized (blue) · Ø Stranded wire: 1.25 mm · Nipple shape: Cylinder · Cable length: 2200 mm · Number of components: 1 pcs
EUR 3,15
Inner cable Ø 1.2 mm x 200 cm with barrel nipple Ø 6 mm
Ø nipple: 6 mm · Nipple length: 5.5 mm · Manufacturer: Made in Germany · Material: Brass · Area of application: Standard · Material: Steel · Surface: galvanized (blue) · Ø Stranded wire: 1.2 mm · Nipple shape: Barrel (transverse) · Cable length: 2000 mm · Number of components: 1 pcs
EUR 3,85
HPI racing ignition 12V with light 60W
Manufacturer: HPI · Material: Aluminum · Material: Steel · Tension: 12 V · Ø cable: 7 mm · Light coil voltage: 12 V · Ø Internal flywheel: 61.5 mm · Performance: 60 W · Direction of rotation: left · Direction of rotation: right · Ø mounting plate: 90 mm · Mounting type: Screws · Ø Flywheel outside: 71.5 mm · Number of fixing points: 6 pcs · Area of application: Tuning · Weight: 340 g
EUR 338,00
swiing® ingenious fan wheel black (EVO, HPI, Bosch,Ducati) | Puch X30 Velux / Sachs 503 / Belmondo
Manufacturer: swiing® ingenious parts · Material: Aluminum · Surface: anodized · Color: black · Ø inside: 39 mm · Height: 13.5 mm · Ø outside: 120 mm · Weight: 87 g · Number of fixing points: 10 pcs · Ø bolt circle: 48 mm · Ø bolt circle: 70 mm · Ø bolt circle: 100 mm · Ø mounting hole: 5.5 mm · Ø mounting hole: 6 mm
EUR 67,50
swiing® ingenious 250 g additional weight HPI Inox | Puch X30 Velux / Sachs 503 / Belmondo
Manufacturer: swiing® ingenious parts · Material: Chrome steel (stainless steel) · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Surface: blank · Thickness: 5 mm · Ø inside: 71.8 mm · Ø outside: 117 mm · Weight: 250 g · Number of fixing points: 4 pcs · Ø bolt circle: 101 mm · Ø mounting hole: 5 mm
EUR 29,10
swiing® ingenious 100 g additional weight HPI Inox | Puch X30 Velux / Sachs 503 / Belmondo
Manufacturer: swiing® ingenious parts · Material: Chrome steel (stainless steel) · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Surface: blank · Thickness: 1.8 mm · Ø inside: 71.8 mm · Ø outside: 117 mm · Weight: 100 g · Number of fixing points: 4 pcs · Ø bolt circle: 101 mm · Ø mounting hole: 5 mm
EUR 22,40
Collection only possible with online purchase and appointment.
