Relatively unobtrusive and quiet racing muffler.
This racing exhaust provides a good increase in performance both in conjunction with an original cylinder and with a racing kit.
Internal flame tube diameter: 22 mm
External flame tube diameter: 25 mm
Scope of delivery according to figure 1.
Make sure that the exhaust is mounted without tension. It may need to be spaced out with shims.
Suitable seals and other items can be found in the accessories section.
Quality product from the Italian manufacturer SITO.
Details
Manufacturer | SITO |
Total length | 760 mm |
Material | Steel |
Surface | varnished |
Color | black |
Ø Silencer | 60 mm |
Ø Internal connection | 22 mm |
Ø Flame tube outside | 25 mm |
Exhaust type | Cigar |
Mounting type | Welded lug |
Flame tube attachment | Flange |
Number of fixing points | 1 pcs |
Suitable for the following models
Tomos |
Accessories & related products
38 mm cylinder NOS | Tomos 2L, 3L, 4L
Nominal diameter: 38 mm · Manufacturer: Tomos · Material: Gray cast iron · Area of application: Original · Camouflaged: Yes · Surface: raw · Displacement: 50 ccm · Outlet type: straight · Thread outlet: M6x1 (standard thread) · Number of fixing points: 4 pcs · Hole pattern [mm]: 44 x 44
EUR 214,00
DMP 38 mm cylinder kit slanted exhaust 12 mm KoBo | Tomos Sprint, Quadro, FunSport, Classic
Nominal diameter: 38 mm · Manufacturer: DMP · Material: Gray cast iron · Area of application: Standard · Camouflaged: Yes · Surface: varnished · Crankshaft stroke: 43 mm · Displacement: 50 ccm · Ø piston pin (B): 12 mm · Thread inlet: M5x0.8 (standard thread) · Hole spacing outlet: 42 mm · Outlet type: slanted · Thread outlet: M6x1 (standard thread) · Number of fixing points: 4 pcs · Hole pattern [mm]: 44 x 44 · Tomos spare part no.: 229402
EUR 112,60
swiing® ingenious gasket outlet (18 - 22 mm) graphite
Manufacturer: swiing® ingenious parts · Material: Graphite / Graphite · Area of application: Standard · Reinforced: No · Thickness: 3.4 mm · Ø outlet inside: 22.7 mm · Place of use: Exhaust · Hole spacing outlet: 37.5 - 42.5 mm · Ø screw holder: 7.3 mm
EUR 7,80
Moped fans like you also bought:
Spotlight round Ø 13 cm chrome / black
Area of application: Standard · Test mark: none · Housing material: Metal · Material: Sheet metal (steel) · Width: 134 mm · Surface: chrome-plated · Surface: varnished · Thread size: M6 · Lens material: Plastic · Bulb holder: BA15d · Ø outside: 130 mm · Depth: 80 mm · Color: Chrome · Switch included: No · Battery operated: No · Color: black · Color: transparent · Mounting type: Screws · Speedometer recording: None · Number of fixing points: 2 pcs · Height: 147 mm
EUR 28,10
Union pedals plastic standard
Thread type: FG14.3 (9/16" 20G) · Manufacturer: Union · Total length: 129 mm · Material: Plastic · Material: Steel · Width: 77 mm · Surface: rubberized · Drive: Hexagon socket · Drive: Outer edge · Width across flats SW: 15 mm · Color: black · Reflectors: Yes · Height: 29 mm
EUR 14,50
swiing® revival wheel axle set M12x1 x 185 cast rear wheel galvanized | Puch
Thread type: MF12x1 (fine pitch thread) · Manufacturer: swiing® revival parts · Total length: 185 mm · Material: Steel · Surface: blue galvanized · Ø shaft: 11.9 mm · Shank length: 100 mm · Thread length: 26 mm · Thread length: 52.5 mm · Width across flats SW: 19 mm · Ø outside: 11.8 mm
EUR 16,80
Karcoma fuel filter 24 mm plastic / paper
Manufacturer: Karcoma · Total length: 35 mm · Total length: 60 mm · Material: Paper · Material: Plastic · Ø inside: 4.7 mm · Filter type: Filter paper · demountable: No · Ø outside: 24 mm · Color: transparent · Color: yellow · Ø fuel hose connection: 6 mm · Ø fuel hose connection: 7.3 mm
EUR 15,10