Hot Hot
Carousel Image 1
Carousel Image 2
Carousel Image 3
Carousel Image 4
logo_siggnature-bikes

Universal

32986

Siggnature cylinder clamping tool 38 / 41 / 44 mm

Home
| Motor
| Cylinder
| Piston
EUR 67,50

Incl. VAT, plus shipping costs

in stock

The item is in stock. Delivery time 2–4 workdays

Goes well with (optional):

Spreading tool for clamping cylinders for mopeds, mopeds or small motorcycles on the lathe. The clamping sleeve is spread in the cylinder using a mandrel and a lock nut. This fixes the cylinder securely in place and allows it to be easily turned as required.

The smooth surface finish and cleanly chamfered edges protect the raceway from damage.

Total mandrel length: 154 mm
MF16 x 1.5 mm
Length of clamping sleeve: 60 mm
Clamping range depending on expanding sleeve: 37.6 - 38.6 / 40.6 - 41.6 / 43.6 - 44.6 mm

Note: If only the mandrel is supplied without clamping sleeves, leave the selection fields blank. The scope of delivery corresponds to image 1. Images 2 to 4 are for illustration purposes using the mandrel.

A super cool custom product straight from the Siggnature workshop.

The set includes the following fixed parts:

Siggnature cylinder clamping tool without clamping sleeves

Universal

Siggnature cylinder clamping tool without clamping sleeves

32984

Manufacturer: Siggnature · Material: Steel · Surface: polished · Number of components: 4 pcs · Total length: 154 mm · Thread type: MF16x1.5 (fine pitch thread) · Thread length: 30 mm

Details

ManufacturerSiggnature
MaterialSteel
Surfacepolished
Thread typeMF16x1.5 (fine pitch thread)
Total length154 mm
Thread length30 mm

Accessories & related products

Siggnature cylinder clamping sleeve 41 mm
undefined

Universal

32356

Siggnature cylinder clamping sleeve 41 mm

Manufacturer: Siggnature · Area of application: Special tool · Material: Aluminum · Surface: anodized · Diameter: 41 mm · Total length: 60 mm

EUR 45,00

Siggnature cylinder clamping sleeve 44 mm
undefined

Universal

32357

Siggnature cylinder clamping sleeve 44 mm

Manufacturer: Siggnature · Area of application: Special tool · Material: Aluminum · Surface: anodized · Diameter: 44 mm · Total length: 60 mm

EUR 45,00

Siggnature cylinder clamping sleeve 38 mm
undefined

Universal

32358

Siggnature cylinder clamping sleeve 38 mm

Manufacturer: Siggnature · Material: Aluminum · Area of application: Special tool · Surface: anodized · Diameter: 38 mm · Total length: 60 mm

EUR 45,00

Washer M16 large 17/34/4 galvanized

Universal

32957

Washer M16 large 17/34/4 galvanized

Ø inside: 17 mm · Material: Steel · Surface: blue galvanized · Nominal diameter (thread): 16 mm · Ø outside: 34 mm · Thickness: 4 mm

EUR 2,15

Nut M16x1.5 fine thread galvanized

Universal

32958

Nut M16x1.5 fine thread galvanized

Material: Steel · Surface: blue galvanized · Nut type: Hexagon nut · Drive: External hexagon · Height: 13 mm · Width across flats SW: 24 mm · Strength class: 8 · Thread type: MF16x1.5 (fine pitch thread)

EUR 8,90

Nut M16x1.5 fine thread low galvanized

Universal

32959

Nut M16x1.5 fine thread low galvanized

Material: Steel · Surface: blue galvanized · Nut type: Hexagon nut · Drive: External hexagon · Height: 8 mm · Width across flats SW: 24 mm · Strength class: 4 · Thread type: MF16x1.5 (fine pitch thread)

EUR 5,05

Moped fans like you also bought:

KMC drive chain 415H (reinforced) 128L
undefined

For: Universal · Puch · Sachs · Pony / Cilo (Beta 521 & 512) · Zündapp Belmondo · Tomos · Bye Bike · Alpa Chopper / Turbo · Cilo

10040

KMC drive chain 415H (reinforced) 128L

Chain pitch: 1/2" x 3/16" · Chain type: 415H · Ø Pin: 3.94 mm · Manufacturer: KMC · Material: Steel · Surface: blank / oiled · Color: gray · Rolling circumference: 1626 mm · Number of chain links: 128 pcs · Chain lock type: Spring lock · Ø bore: 4 mm

EUR 14,10

GPO control bearing set M26x1 mm | Puch
undefined

For: Puch

10077

GPO control bearing set M26x1 mm | Puch

Bearing type: Bearing ring · Manufacturer: GPO · Material: Steel · Surface: blue galvanized · Color: silver · Thread type: MF26x1 (fine pitch thread) · Ø mounting frame: 31 mm · Ø outside: 41 mm · Ø inside: 26.8 mm

EUR 13,40

Exhaust mounting plate | Puch Maxi N
undefined

For: Puch

10481

Exhaust mounting plate | Puch Maxi N

Manufacturer: Made in Portugal · Material: Steel · Surface: blue galvanized · Cranking (offset): 23 mm · Number of fixing points: 2 pcs · Ø mounting hole: 8.5 mm · Ø mounting hole: 11 mm

EUR 8,90

Inox
GPO Brake support bolt short Inox | Puch Maxi, Supermaxi
undefined

For: Puch

17029

GPO Brake support bolt short Inox | Puch Maxi, Supermaxi

Manufacturer: GPO · Material: Chrome steel (stainless steel) · Area of application: Standard · Drive: Outer edge · Ø External head: 14 mm · Width across flats SW: 13 mm · Width across flats SW: 17 mm · Shank: Yes · Ø shaft: 9.8 mm · Shank length: 9.5 mm · Thread type: MF10x1 (fine pitch thread) · Total length: 32 mm · Thread length: 13 mm · Number of components: 3 pcs

EUR 14,50

swiing® ingenious cylinder clamping tool
undefined

For: Universal · Puch · Sachs

32860

swiing® ingenious cylinder clamping tool

Ø inside: 51.6 mm · Manufacturer: swiing® ingenious parts · Material: Aluminum · Material: Steel · Surface: anodized · Surface: blue galvanized · Height: 22 mm · Ø outside: 99 mm · Number of components: 23 pcs

EUR 67,50

Siggnature cylinder clamping sleeve 41 mm
undefined

Universal

32356

Siggnature cylinder clamping sleeve 41 mm

Manufacturer: Siggnature · Area of application: Special tool · Material: Aluminum · Surface: anodized · Diameter: 41 mm · Total length: 60 mm

EUR 45,00

Siggnature cylinder clamping sleeve 44 mm
undefined

Universal

32357

Siggnature cylinder clamping sleeve 44 mm

Manufacturer: Siggnature · Area of application: Special tool · Material: Aluminum · Surface: anodized · Diameter: 44 mm · Total length: 60 mm

EUR 45,00

Siggnature cylinder clamping sleeve 38 mm
undefined

Universal

32358

Siggnature cylinder clamping sleeve 38 mm

Manufacturer: Siggnature · Material: Aluminum · Area of application: Special tool · Surface: anodized · Diameter: 38 mm · Total length: 60 mm

EUR 45,00

GPO secondary nozzle PHBG (size 30 - 62.5) of your choice
undefined
angle-right

Universal

34782

GPO secondary nozzle PHBG (size 30 - 62.5) of your choice

Manufacturer: GPO · Material: Brass · Carburetor type: PHBG · Carburetor type: PHBG AD · Carburetor type: PHBG AS · Carburetor type: PHBG BD · Carburetor type: PHBG CS · Carburetor type: PHBG DS · Total length: 9.5 mm · Drive: Slot · Nozzle thread: M5 · Nozzle size: 30 · Nozzle size: 32 · Nozzle size: 35 · Nozzle size: 37 · Nozzle size: 38 · Nozzle size: 40 · Nozzle size: 42 · Nozzle size: 44 · Nozzle size: 45 · Nozzle size: 46 · Nozzle size: 48 · Nozzle size: 50 · Nozzle size: 52 · Nozzle size: 55 · Nozzle size: 60 · Nozzle size: 62.5

EUR 4,40

We use cookies

You can find more information in our

  Privacy policy