High-quality saddle base for the saddle shells of the «Tuck & Roll» product line. The mounting holes in the plate match the threaded sockets on the saddle shells perfectly.
This means that the custom shells can be easily mounted on your moped, moped and small motorcycle in conjunction with the substructure.
If the substructure is used with the Tuck & Roll genuine leather saddle, the two Siggnature transition pieces should also be fitted, as the rear threaded studs on the saddle are not parallel to the lower surface.
Hole spacing at the front: 80 mm
Ø slotted hole at the front: Ø 10 x 20
Hole spacing at the rear: 180 mm
Slotted hole at the rear: Ø 12 x 25
Ø clamp: 7 mm
Clamp spacing: 45 mm
Clamp length: 97 mm
Corresponding attachments such as saddle shells, saddle clamps, adapters etc. can be found in the accessories section. You'll find them in the accessories section.
A super cool custom product straight from the Siggnature workshop.
Details
| Manufacturer | Siggnature |
| Color | black |
Accessories & related products
Cap nut M4 - M10 Inox
Material: Chrome steel (stainless steel) · Nut type: Cap nut · Thread type: M10x1.5 (standard thread) · Thread type: M4x0.7 (standard thread) · Thread type: M5x0.8 (standard thread) · Thread type: M6x1 (standard thread) · Thread type: M7x1 (standard thread) · Thread type: M8x1.25 (standard thread) · Drive: External hexagon
EUR 0,90
Moped fans like you also bought:
swiing® revival upright spring blue galvanized | Puch
Spring design: Tension spring · Ø wire: 2.5 mm · Length spring hook: 19 mm · Length spring hook: 53 mm · Manufacturer: swiing® revival parts · Material: Spring steel · Surface: blue galvanized · Ø inside: 9 mm · Ø outside: 14 mm · Total length: 122 mm
EUR 3,05
ESJOT drive chain 415H (reinforced) 114L (1A quality)
Manufacturer: ESJOT · Material: Steel · Surface: blank / oiled · Chain type: 415H · Color: gray · Number of chain links: 114 pcs · Chain pitch: 1/2" x 3/16" · Chain lock type: Spring lock · Rolling circumference: 1448 mm · Ø bore: 4.05 mm · Ø Pin: 4 mm
EUR 21,30
Athena 38 mm cylinder kit 50 cc camouflaged | Puch
Manufacturer: Athena · Material: Aluminum · Surface: sandblasted · Area of application: Tuning · Displacement: 50 ccm · Crankshaft stroke: 43 mm · Ø piston pin (B): 12 mm · Nominal diameter: 38 mm · Ø cylinder neck: 47.7 mm · Inlet window: 22 x 14 · Thread inlet: M6x1 (standard thread) · Number of fixing points: 4 pcs · Ø outlet inside: 24.4 mm · Hole spacing outlet: 42 mm · Outlet type: straight · Hole spacing inlet: 38 mm · Thread outlet: M6x1 (standard thread) · Hole pattern [mm]: 44 x 44 · Camouflaged: Yes
EUR 174,60
Hot 
swiing 15 mm carburetor tuning camouflaged | Puch
Manufacturer: swiing · Material: Aluminum · Carburetor type: SRE · Nominal diameter: 15 mm · Ø Inside entrance: 15 mm · Ø Internal connection: 20 mm · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Mounting type: Plug connection clamped · Width: 50 mm · Vacuum connection: No · Total length: 66 mm · Choke control: Hand choke · Nozzle thread: M3.5 · Nozzle block: 2.17 · Camouflaged: Yes · Nozzle size: 62 · Height: 95 mm · Area of application: Tuning · Clamping screw torque (max.): 4 N/m
EUR 90,10
Collection only possible with online purchase and appointment.
