Original pole wheel, suitable for various mopeds, mopeds and small motorcycles with mechanical breaker ignition and left-hand engine.
The magnetic flywheel can be used for two-speed engines, e.g. Puch X30 Sport, Puch X30 Velux with Z50 engine / Sachs 50, 502, 50/2, 50/3, 50/4, 503 / Zündapp Belmondo 247 etc.
This flywheel is a perfect replica of the original Bosch / Ducati flywheels. The rotor with steel core is perfectly balanced and is suitable for both original and tuned engines.
Weight: 900 grams
Ø inside: 91.1 mm
Ø outside: 116.5 mm
Version 2.0: Revised version of the previously offered flywheel with more precise threaded holes for the idler wheel and exact positioning of the breaker cam.
Matching attachments for the flywheel such as the ignition plate, breaker, condenser, ignition coil, ignition plug etc. can be found in the accessories section.
Good, inexpensive standard spare part. GPO – GOOD PARTS ONLY.
Original Puch spare part number: 360.4.50.210.2 / 360.4.50.110.2
Original Sachs spare part number: A2600 / 0286 175 005
Original Zündapp spare part number: 265-07.923 / 265-07-916
Details
| Thread type | MF26x1.5 (fine pitch thread) |
| Manufacturer | GPO |
| Material | Steel |
| Tension | 6 V |
| Direction of rotation | left |
| Weight | 900 g |
| Performance | 17 W |
| Thread length | 8 mm |
| Ø cone small inside | 11.5 mm |
| Ø cone large inside | 15 mm |
| Cone length | 18.5 mm |
| Ø Internal flywheel | 91.1 mm |
| Cone ratio | 1:5 |
| Ø Flywheel outside | 116.5 mm |
| Height | 36.1 mm |
| Pony spare part no. | A2600 |
| Sachs spare part no. | 0286 175 005 |
Suitable for the following models
| Puch | ZA50 (Fahrtwindgekühlt) ZA50 (Gebläsegekühlt) Z50 (X30 Sport) Z50 (X30 Velux) 2-Gang MS, MV, MV50 3-Gang VSD, DS, VZ, MC |
| Sachs | 50 (Fahrtwind, 1.25 / 1.5 PS, DE) 502 (Saxonette) - AL, AML 50/2 - L CH (0.8 PS), ML CH (0.8 PS), MB (2.6 PS), MLB (2.6 PS) 50/3 50/4 - MLFB (2.6 PS), LKH (4.5 PS) 50/5 503 - AAL, ABL, 2AL / 2BL, AB, AC, ADV 505 (mit Tretwelle) - 1A (AT), 2 A (HG) 535 |
| Zündapp Belmondo | |
| Tomos | A3 |
| DKW | |
| Hercules | |
| Kreidler | Flory MF Florett |
| Zündapp | 434 Fahrgestell (Bergsteiger) 247 Motor 278 Motor |
| KTM | |
| Rixe |
Accessories & related products
BERU spark plug connector / 1 kΩ interference suppressed
Manufacturer: BERU · Material: Sheet metal (steel) · Color: silver · Ø cable: 5 mm · Ø cable: 7 mm · Spark plug socket: M4 · Cable available: No · Suppressed: Yes · Resistance: 1000 Ω · Pony spare part no.: A2099 · Sachs spare part no.: 0265 100 00
EUR 9,85
GPO flywheel trigger M26x1.5 / M22x1.5 | Puch, Sachs
Total length: 55 mm · Total length: 75 mm · Width across flats (trigger): 27 mm · Width across flats Screw: 19 mm · Manufacturer: GPO · Clamping depth: 10 mm · Area of application: (Dis)assembly tool · Material: Steel · Surface: blackened · Number of components: 1 pcs · Thread type: MF22x1.5 (fine pitch thread) · Thread type: MF26x1.5 (fine pitch thread) · Strength class: 8.8
EUR 11,20
GPO ignition plate set 90 mm (Bosch, Ducati Replica)
Manufacturer: GPO · Ø inside: 18.5 mm · Ø outside: 90 mm · Material: Aluminum · Area of application: Original · Area of application: Standard · Surface: dull · Color: gray · Tension: 6 V · Number of cables: 3 pcs · Cable length: 400 mm · Cable length: 500 mm · Number of fixing points: 4 pcs · Ø bolt circle: 80 mm
EUR 84,40
BOSCH screw-in condenser | Bosch / Ducati
Ø outside: 18 mm · Manufacturer: BOSCH · Area of application: Original · Area of application: Standard · Capacity: 0.2 µF · Thread type: M3x0.5 (standard thread) · Mounting type: Plug connection clamped · Height: 27 mm · Connection type: Thread for screwing · Alternative version of the Pony Spare part no.: A2090 · Pony spare part no.: A2092 · BOSCH spare part no.: 2 207 330 050 · Alternative version of Sachs spare part no.: 0265 052 003 · Sachs spare part no.: 0265 052 007
EUR 22,40
BOSCH Breaker without cable reinforced | Bosch / Ducati
Manufacturer: BOSCH · Ø axle: 4 mm · Material: Steel · Area of application: Tuning · Cable available: No · Ø Internal flywheel: 90 mm · Number of fixing points: 1 pcs · Ø mounting hole: 4.5 mm · Alternative version of the Pony Spare part no.: A4606 · BOSCH spare part no.: 1 217 013 020 · Alternative version of Sachs spare part no.: 0983 106 000 · BERU spare part no.: 0 340 100 466
EUR 23,60
EUR 28,10
DUCATI ignition coil (1A quality)
Manufacturer: DUCATI · Hole spacing: 54 mm · Area of application: Original · Area of application: Standard · Color: black · Ø cable holder: 5.9 mm · Mounting type: Screws · Height: 17 mm · Total length: 76.5 mm · Cable length: 37 mm · Ø Internal flywheel: 90 mm · Place of use: Internal (in the ignition) · Number of fixing points: 2 pcs · Ø mounting hole: 4.6 mm · Pony spare part no.: A2114 · Alternative version of the Pony Spare part no.: A2116 · Alternative version of the Pony Spare part no.: A2118 · Pony spare part no.: A5524 · Alternative version of Sachs spare part no.: 0265 142 002 · Alternative version of Sachs spare part no.: 0265 142 004 · Sachs spare part no.: 0265 132 100 · Sachs spare part no.: 0265 203 001
EUR 73,20
swiing ignition plate set Bosch, Ducati (Version 2.0)
Ø inside: 18.5 mm · Ø outside: 90 mm · Manufacturer: swiing · Material: Aluminum · Color: gray · Number of cables: 3 pcs · Tension: 6 V · Cable length: 450 mm · Cable length: 550 mm · Number of fixing points: 4 pcs · Ø bolt circle: 80 mm · Alternative version of the Pony Spare part no.: A2656 · Alternative version of Sachs spare part no.: 0283 130 004 · Alternative version of Sachs spare part no.: 0286 254 008
EUR 123,90
Moped fans like you also bought:
BERU spark plug connector / 1 kΩ interference suppressed
Manufacturer: BERU · Material: Sheet metal (steel) · Color: silver · Ø cable: 5 mm · Ø cable: 7 mm · Spark plug socket: M4 · Cable available: No · Suppressed: Yes · Resistance: 1000 Ω · Pony spare part no.: A2099 · Sachs spare part no.: 0265 100 00
EUR 9,85
GPO flywheel trigger M26x1.5 / M22x1.5 | Puch, Sachs
Total length: 55 mm · Total length: 75 mm · Width across flats (trigger): 27 mm · Width across flats Screw: 19 mm · Manufacturer: GPO · Clamping depth: 10 mm · Area of application: (Dis)assembly tool · Material: Steel · Surface: blackened · Number of components: 1 pcs · Thread type: MF22x1.5 (fine pitch thread) · Thread type: MF26x1.5 (fine pitch thread) · Strength class: 8.8
EUR 11,20
GPO ignition plate set 90 mm (Bosch, Ducati Replica)
Manufacturer: GPO · Ø inside: 18.5 mm · Ø outside: 90 mm · Material: Aluminum · Area of application: Original · Area of application: Standard · Surface: dull · Color: gray · Tension: 6 V · Number of cables: 3 pcs · Cable length: 400 mm · Cable length: 500 mm · Number of fixing points: 4 pcs · Ø bolt circle: 80 mm
EUR 84,40
Hot 
VEC electronic ignition coil (replaces ignition coil, capacitor & contact breaker)
Manufacturer: VEC · Hole spacing: 54 mm · Area of application: Original · Area of application: Performance · Area of application: Standard · Color: black · Ø cable holder: 5 mm · Mounting type: Screws · Height: 48 mm · Total length: 77 mm · Cable length: 140 mm · Cable length: 420 mm · Ø Internal flywheel: 90 mm · Place of use: Internal (in the ignition) · Number of fixing points: 2 pcs · Ø mounting hole: 4.6 mm
EUR 112,60
Not in stock
Nut M10x1 SW14 Flywheel
Height: 8.9 mm · Width across flats SW: 14 mm · Manufacturer: GPO · Ø outside: 18.8 mm · Area of application: Standard · Material: Steel · Surface: blue galvanized · Nut type: Flange nut · Thread type: MF10x1 (fine pitch thread) · Drive: External hexagon · Pony spare part no.: A4513 · Sachs spare part no.: 0942 072 102
EUR 2,70
Collection only possible with online purchase and appointment.
