&p>Transition piece for the Siggnature saddle base and the «Tuck & Roll» genuine leather saddle.
The custom shell «genuine leather» on the accessories in conjunction with the substructure can be easily fitted to your moped, moped and small motorcycle.
The use of these two adapter pieces is necessary because the rear threaded sockets on the saddle are not parallel to the lower surface and the nut would therefore be tightened at an angle.
Ø bore: 8.3 mm (for M8)
Ø outer: 25 mm
Total height: 24 mm
Corresponding attachments such as saddle shell, saddle clamps, substructure etc. can be found in the accessories section.
A kick-ass custom product straight from the Siggnature workshop
.Details
| Manufacturer | Siggnature |
| Height | 24 mm |
| Color | black |
| Thread size | M8 |
| Ø outside | 25 mm |
| Ø bore | 8 mm |
Accessories & related products
Loctite 243 medium-strength threadlocker 10 ml
Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Area of application: Chemistry · Color: blue · Contents [ml]: 10 ml · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Adhesion: medium strength · Type of application: 1K · Gap dimension (max.): 0.01 mm · Alignment time: 600 sec · Temperature resistance (min.): -75 - 200 °C · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
EUR 25,70
EUR 2.570,00/l
Cap nut M4 - M10 Inox
Material: Chrome steel (stainless steel) · Nut type: Cap nut · Thread type: M10x1.5 (standard thread) · Thread type: M4x0.7 (standard thread) · Thread type: M5x0.8 (standard thread) · Thread type: M6x1 (standard thread) · Thread type: M7x1 (standard thread) · Thread type: M8x1.25 (standard thread) · Drive: External hexagon
EUR 0,95
66HEROES pointed nut "Bullit" M5 - M12 stainless steel polished
Manufacturer: 66HEROES · Material: Chrome steel (stainless steel) · Nut type: Pointed nut · Thread type: M10x1.5 (standard thread) · Thread type: M12x1.75 (standard thread) · Thread type: M5x0.8 (standard thread) · Thread type: M6x1 (standard thread) · Thread type: M8x1.25 (standard thread) · Drive: External hexagon
EUR 8,10
66HEROES pointed nut "Spike" M5 - M12 Inox
Manufacturer: 66HEROES · Material: Chrome steel (stainless steel) · Nut type: Pointed nut · Thread type: M10x1.5 (standard thread) · Thread type: M12x1.75 (standard thread) · Thread type: M5x0.8 (standard thread) · Thread type: M6x1 (standard thread) · Thread type: M8x1.25 (standard thread) · Drive: External hexagon
EUR 8,10
Moped fans like you also bought:
swiing® revival bottom bracket bushing nylon | Puch Maxi, X30 Sport, Velux, NG-2AH
Ø Bundle: 24.1 mm · Manufacturer: swiing® revival parts · Total length: 19 mm · Material: Nylon · Surface: blank · Color: black · Bearing type: Plain bearing · Ø outside: 20.2 mm · Ø inside: 16.2 mm · Puch OEM number: 349.1.42.005.1
EUR 2,95
Handlebar fork plate 30 cm curved black
Manufacturer: Made in Portugal · Material: Steel · Surface: varnished · Color: black · Mounting type: Fork plate · Clamping diameter: 22 mm · Fork plate holder length: 75 mm · Ø outside: 22 mm · Height: 300 mm · Length handlebar ends: 145 mm · Width: 610 mm · Crossbar: No
EUR 45,50
swiing® revival screw set Motor Inox | Puch E50
Manufacturer: swiing® revival parts · Material: Chrome steel (stainless steel) · Surface: blank · Drive: Hexagon socket · Drive: Slot · Screw head: Countersunk head · Screw head: Cylinder head · Area of application: Standard · Puch OEM number: 900.1216 · Puch OEM number: 900.1308
EUR 23,30
Collection only possible with online purchase and appointment.
