Selettra stator suitable for ignition type NO2019, for left- and right-turning engines with Ø 90 mm ignition plate mount.
The ignition stator can be mounted on various mopeds, mopeds and small motorcycles such as Puch Maxi S / N, Puch X30 Sport NS / NL, Puch X30 NG-2AH, Puch X30 Velux, Sachs 503, Sachs 50/2, Zündapp Belmondo, Kreidler etc.
Type number: 034-IG-14
Fits system: NO2019 (adjustment angle 3°)
Direction of rotation: Left & Right
Light connection: No
Number of turns: 2400
Plug type: Superseal
Basic adjustment of the ignition: Set the crankshaft to 15 - 20° before TDC (top dead center), the markings must then match.
Corresponding add-on parts such as stator, ignition coil, complete ignitions, adjustment tool, additional weights etc. can be found in the accessories section.
Quality product from the Italian manufacturer Selettra.
Details
| Manufacturer | Selettra |
| Area of application | Tuning |
| Color | red |
| Number of cables | 2 pcs |
Suitable for the following models
| Puch | E50 ZA50 (Fahrtwindgekühlt) ZA50 (Gebläsegekühlt) Z50 (X30 Sport) Z50 (X30 Velux) 2-Gang MS, MV, MV50 3-Gang VSD, DS, VZ, MC |
| Sachs | 50 (Fahrtwind, 1.25 / 1.5 PS, DE) 502 (Saxonette) - AL, AML 50/2 - L CH (0.8 PS), ML CH (0.8 PS), MB (2.6 PS), MLB (2.6 PS) 50/3 50/4 - MLFB (2.6 PS), LKH (4.5 PS) 503 - AAL, ABL, 2AL / 2BL, AB, AC, ADV 505 (mit Tretwelle) - 1A (AT), 2 A (HG) 535 |
| Zündapp Belmondo |
Accessories & related products
swiing® ingenious screw M6x25 special drive pinion pull rope starter PVL, Selettra
Manufacturer: swiing® ingenious parts · Material: Steel · Surface: blue galvanized · Thread type: M6x1 (standard thread) · Drive: Hexagon socket · Screw head: Countersunk head · Total length: 25 mm · Strength class: 10.9 · Width across flats SW: 4 mm
EUR 3,25
swiing® ingenious 124 g additional weight MVT, PVL, Selettra
Manufacturer: swiing® ingenious parts · Weight: 131 g · Material: Steel · Surface: blue galvanized · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Ø inside: 24.5 mm · Ø outside: 65 mm · Thickness: 4 mm · Number of fixing points: 3 pcs
EUR 21,60
Not in stock
swiing® ingenious 100 g additional weight / adapter plate | MVT, PVL, Selettra
Manufacturer: swiing® ingenious parts · Weight: 110 g · Material: Steel · Surface: blue galvanized · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Ø inside: 24.5 mm · Ø outside: 65 mm · Thickness: 9 mm · Ø mounting hole: 6 mm · Number of fixing points: 4 pcs · Ø bolt circle: 50 mm
EUR 41,00
Moped fans like you also bought:
GPO 15 mm carburetor tuning | Puch
Nominal diameter: 15 mm · Manufacturer: GPO · Material: Aluminum · Carburetor type: SRE · Ø Internal connection: 20 mm · Total length: 66 mm · Width: 50 mm · Ø Inside entrance: 15 mm · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Mounting type: Plug connection clamped · Height: 95 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Nozzle thread: M3.5 · Area of application: Tuning · Nozzle block: 2.17 · Camouflaged: No · Nozzle size: 62 · Clamping screw torque (max.): 4 N/m
EUR 73,20
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø Stranded wire: 1.25 mm · Cable length: 2200 mm · Nipple shape: Cylinder · Ø nipple: 3 mm · Nipple length: 5 mm · Manufacturer: Made in Germany · Area of application: Standard · Material: Steel · Surface: blue galvanized · Number of components: 1 pcs
EUR 3,15
swiing® revival 38 mm gasket set tuning cylinder | Puch
Manufacturer: swiing® revival parts · Material: Aluminum · Material: Sealing carton · Material: Sealing paper · Ø cylinder: 38 mm · Hole pattern [mm]: 44 x 44 mm · Hole spacing inlet: 38 mm · Number of components: 4 pcs · Hole spacing outlet: 42 mm · Area of application: Standard · Decompressor: Yes
EUR 11,20
Collection only possible with online purchase and appointment.
