High-quality and powerful racing muffler, suitable for your Puch Maxi S with E50 engine and X30 Sport moped / moped with Z50 engine.
The left-hand racing muffler is not only a visual highlight, but also impresses with its significant increase in performance over the entire rev range, with a focus on pulling power.
Note: The tuning exhaust with aluminum silencer was specially developed for the 43.5 mm Polini cylinder. Of course, it can also be used on other cylinder kits, although it should no longer be your first choice on 47 mm. Depending on the cylinder, it may also require adjustments to the cooling fins in the exhaust area in order to be able to fit the flange supplied.
The surface is raw and untreated. Paint the exhaust before commissioning or spray it with heat-resistant paint to protect it from rust.
To fit the racing exhaust system to the Maxi N, you will need an extension for the rear exhaust attachment.
Details
| Manufacturer | Polini |
| Material | Steel |
| Surface | blank |
| Total length | 900 mm |
| Ø Silencer | 60 mm |
| Exhaust type | Cone / double cone |
| Number of fixing points | 2 pcs |
| Flame tube attachment | Flange, suspended |
Suitable for the following models
| Puch | E50 Z50 (X30 Sport) |
Accessories & related products
Polini 43.5 mm cylinder kit reed | Puch
Material: Aluminum · Surface: nikasil-coated · Nominal diameter: 43.5 mm · Manufacturer: Polini · Displacement: 65 ccm · Crankshaft stroke: 43 mm · Ø cylinder neck: 48 mm · Number of fixing points: 4 pcs · Ø outlet inside: 22 mm · Inlet window: 26 x 21 · Thread inlet: M5x0.8 (standard thread) · Area of application: Racing · Area of application: Tuning · Hole spacing inlet: 32 mm · Hole spacing inlet: 39 mm · Ø piston pin (B): 12 mm · Outlet type: straight · Hole spacing outlet: 42 mm · Thread outlet: M6x1 (standard thread) · Hole pattern [mm]: 44 x 44 · Camouflaged: No
EUR 351,60
Hot 
HOMOET exhaust P6 blank | Puch
Manufacturer: HOMOET · Material: Steel · Surface: raw · Surface: varnished · Ø outside: 88 mm · Total length: 900 mm · Color: gray · Ø Silencer: 50 mm · Ø Flame tube outside: 28 mm · Exhaust type: Cone / double cone · Mounting type: Tab · Number of fixing points: 2 pcs · Flame tube attachment: Stud bolts & nuts
EUR 334,00
Not in stock
MOTIP heat-resistant paint black 400 ml
Manufacturer: MOTIP · Area of application: Paint & varnish · Color: black · Contents [ml]: 400 ml · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Extremely flammable aerosol · Hazard warning: May cause drowsiness and dizziness · Hazard warning: Pressurized container: may burst when heated · Hazard warning: Toxic to aquatic organisms (with long-term effects) · Signal word: Danger · Hazard pictogram: GHS02 - Highly flammable · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Temperature resistance (min.): 0 - 800 °C
EUR 29,20
EUR 73,00/l
MOTIP heat-resistant clear lacquer (matt) 400 ml
Manufacturer: MOTIP · Area of application: Paint & varnish · Color: transparent · Contents [ml]: 400 ml · Hazard warning: Causes serious eye damage · Hazard warning: Extremely flammable aerosol · Hazard warning: May cause drowsiness and dizziness · Hazard warning: Pressurized container: may burst when heated · Signal word: Danger · Hazard pictogram: GHS02 - Highly flammable · Hazard pictogram: GHS05 - Corrosive · Hazard pictogram: GHS07 - Caution dangerous · Temperature resistance (min.): 0 - 800 °C
EUR 29,20
EUR 73,00/l
Polini 43.5 mm cylinder kit reed valve with head (version 2.0) | Puch
Manufacturer: Polini · Area of application: Racing · Area of application: Tuning · Material: Aluminum · Surface: nikasil-coated · Displacement: 65 ccm · Crankshaft stroke: 43 mm · Ø piston pin (B): 12 mm · Nominal diameter: 43.5 mm · Ø cylinder neck: 48 mm · Camouflaged: No · Inlet window: 26 x 21 · Thread inlet: M5x0.8 (standard thread) · Ø outlet inside: 22 mm · Hole pattern [mm]: 44 x 44 · Number of fixing points: 4 pcs · Hole spacing outlet: 42 mm · Outlet type: straight · Thread outlet: M6x1 (standard thread) · Hole spacing inlet: 32 mm · Hole spacing inlet: 39 mm
EUR 467,70
Polini CP 21 mm carburetor & air filter (cable choke)
Manufacturer: Polini · Material: Aluminum · Carburetor type: CP · Nominal diameter: 21 mm · Ø Internal connection: 24 mm · Ø without reducing sleeve: 25 mm · Ø Air filter connection: 46 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: Yes · Vacuum connection: Yes · Choke control: Cable choke · Nozzle thread: M5x0.8 (standard thread) · Nozzle size: 100 · Size of secondary nozzle: 40 · Mounting type: Plug connection · Area of application: Tuning
EUR 199,20
Polini 43.5 mm cylinder head | Puch
Manufacturer: Polini · Material: Aluminum · Ø cylinder: 43.5 mm · Hole pattern [mm]: 44 x 44 · Candle thread: long · Number of fixing points: 4 pcs · Decompressor: No · Total length: 145 mm · Width: 135 mm · Height: 48 mm · Area of application: Racing · Area of application: Tuning
EUR 93,70
Moped fans like you also bought:
swiing® ingenious EVO ignition | Puch E50, Z50
Manufacturer: swiing® ingenious parts · Tension: 12 V · Light coil voltage: 12 V · Performance: 60 W · Direction of rotation: any · Ø mounting plate: 90 mm · Ø Internal flywheel: 63.5 mm · Ø Flywheel outside: 75 mm · Mounting type: Screws · Number of fixing points: 3 pcs · Area of application: High End · Area of application: Racing · Area of application: Tuning
EUR 292,90
Not in stock
Collection only possible with online purchase and appointment.
