Polini cylinder cover made of aluminum, suitable for the corresponding Polini 43.5 mm cylinder kit on your Puch moped / moped.
The combustion chamber cover fits, among others, on your Maxi with E50 engine or also on the X30 Sport with Z50 engine.
The workmanship is of high quality and the sealing surfaces are cleanly milled flat.
Note: Spark plugs with long thread are required.
You can find the matching racing kit / racing cylinder in the accessories section.
Quality product from the Italian manufacturer Polini.
Details
| Manufacturer | Polini |
| Material | Aluminum |
| Width | 135 mm |
| Height | 48 mm |
| Total length | 145 mm |
| Ø cylinder | 43.5 mm |
| Area of application | Tuning, Racing |
| Candle thread | long |
| Number of fixing points | 4 pcs |
| Hole pattern [mm] | 44 x 44 |
| Decompressor | No |
Suitable for the following models
| Puch | E50 Z50 (X30 Sport) |
Accessories & related products
Polini 43.5 mm cylinder kit reed | Puch
Material: Aluminum · Surface: nikasil-coated · Nominal diameter: 43.5 mm · Manufacturer: Polini · Displacement: 65 ccm · Crankshaft stroke: 43 mm · Ø cylinder neck: 48 mm · Number of fixing points: 4 pcs · Ø outlet inside: 22 mm · Inlet window: 26 x 21 · Thread inlet: M5x0.8 (standard thread) · Area of application: Racing · Area of application: Tuning · Hole spacing inlet: 32 mm · Hole spacing inlet: 39 mm · Ø piston pin (B): 12 mm · Outlet type: straight · Hole spacing outlet: 42 mm · Thread outlet: M6x1 (standard thread) · Hole pattern [mm]: 44 x 44 · Camouflaged: No
EUR 351,60
swiing® revival stud bolt set M6 x 106 mm | Puch
Manufacturer: swiing® revival parts · Thread length: 13 mm · Thread length: 18.5 mm · Diameter: 5.9 mm · Material: Steel · Surface: galvanized (blue) · Thread type: M6x1 (standard thread) · Drive: External hexagon · Total length: 106 mm · Width across flats SW: 10 mm · Alternative version of the Puch OEM number: 360.1.10.034.1
EUR 8,70
GPO 43.5 mm cylinder head with O-ring, Polini Tuning new version | Puch
Manufacturer: GPO · Material: Aluminum · Surface: sandblasted · Width: 135 mm · Height: 55 mm · Total length: 140 mm · Ø cylinder: 43.5 mm · Candle thread: short · Number of fixing points: 4 pcs · Hole pattern [mm]: 44 x 44 · Decompressor: No · Area of application: Tuning
EUR 63,20
NGK B7ES spark plug long thread
Manufacturer: NGK · Candle designation: B7ES · Candle thread type: long · Thread type: MF14x1.25 (fine pitch thread) · Width across flats SW: 21 mm · Spark plug socket: M4 · Spark plug socket: SAE · Suppressed: No · Area of application: Performance · Area of application: Racing · Area of application: Tuning
EUR 7,60
NGK BR8EIX spark plug long thread interference-suppressed Iridium
Manufacturer: NGK · Candle designation: BR8EIX · Candle thread type: long · Thread type: MF14x1.25 (fine pitch thread) · Width across flats SW: 21 mm · Spark plug socket: M4 · Spark plug socket: SAE · Electrode material: Iridium · Suppressed: Yes · Area of application: High End · Area of application: MX · Area of application: Racing · Area of application: Tuning
EUR 31,50
Polini 43.5 mm cylinder kit reed valve with head (version 2.0) | Puch
Manufacturer: Polini · Area of application: Racing · Area of application: Tuning · Material: Aluminum · Surface: nikasil-coated · Displacement: 65 ccm · Crankshaft stroke: 43 mm · Ø piston pin (B): 12 mm · Nominal diameter: 43.5 mm · Ø cylinder neck: 48 mm · Camouflaged: No · Inlet window: 26 x 21 · Thread inlet: M5x0.8 (standard thread) · Ø outlet inside: 22 mm · Hole pattern [mm]: 44 x 44 · Number of fixing points: 4 pcs · Hole spacing outlet: 42 mm · Outlet type: straight · Thread outlet: M6x1 (standard thread) · Hole spacing inlet: 32 mm · Hole spacing inlet: 39 mm
EUR 467,70
Polini intake system 4-folding diaphragm "Big Valve" PHBG / CP carburetor | Puch
Ø outside: 24 mm · Manufacturer: Polini · Material: Aluminum · Camouflaged: No · Material: Plastic · Surface: glass bead blasted · Number of flaps: 4 pcs · Membrane material: Carbonite · Thick membrane platelets: 0.3 mm · Thread type: M5x0.8 (standard thread) · Ø inside: 28.6 mm · Ø mounting hole: 5.2 mm · Mounting type: Screws · Number of fixing points: 4 pcs · Area of application: Racing · Area of application: Tuning
EUR 164,00
Polini racing exhaust "for race" blanco | Puch Maxi, X30
Manufacturer: Polini · Material: Steel · Surface: blank · Total length: 900 mm · Ø Silencer: 60 mm · Exhaust type: Cone / double cone · Number of fixing points: 2 pcs · Flame tube attachment: Flange · Flame tube attachment: suspended
EUR 433,60
Moped fans like you also bought:
Hot 
swiing® ingenious exhaust 22 mm camouflaged 2-piece | Puch Maxi S, N
Material: Steel · Surface: chrome-plated · Manufacturer: swiing® ingenious parts · Color: Chrome · Total length: 910 mm · Mounting type: Stud bolts & nuts · Mounting type: Welded lug · Number of fixing points: 4 pcs · Ø Silencer: 54.5 mm · Ø outside: 59 mm · Ø Flame tube outside: 22 mm · Exhaust type: Flute · Flame tube attachment: Flange
EUR 175,70
Dell'Orto 19 mm PHBG CS carburetor hand choke
Manufacturer: Dell'Orto · Material: Aluminum · Camouflaged: No · Color: black · Carburetor type: PHBG CS · Nominal diameter: 19 mm · Ø without reducing sleeve: 26 mm · Ø Inside entrance: 19 mm · Total length: 82 mm · Ø Output inside: 19 mm · Ø Air filter connection: 32 mm · Ø Air filter connection: 60 mm · Air filter connection thread: MF32x1.25 (fine pitch thread) · Ø Internal connection: 24 mm · Ø fuel hose connection: 5.4 mm · Ø fuel hose connection: 6 mm · Width: 70 mm · Mixed oil connection: Yes · Height: 124 mm · Mounting type: Plug connection clamped · Vacuum connection: Yes · Choke control: Hand choke · Area of application: Racing · Area of application: Tuning · Choke nozzle size: 60 · Nozzle thread: M5x0.8 (standard thread) · Nozzle size: 75 · Size of secondary nozzle: 45
EUR 140,60
swiing® revival M8x12 oil drain plug & copper ring | Puch E50, Z50
Width across flats Screw: 13 mm · Manufacturer: swiing® revival parts · Material: Copper · Material: Steel · Surface: galvanized (blue) · Color: silver · Thread type: M8x1.25 (standard thread) · Screw head: Hexagon · Thread length: 12 mm · Total length: 18 mm · Drive: External hexagon · Drive: Slot · Puch OEM number: 901.1053
EUR 4,10
swiing nozzle set M3.5 (64 - 74) Bing SRE, SRA, SRC, SRF
Manufacturer: swiing · Material: Brass · Quantity: 6 pcs · Carburetor type: SRA (1/11/31) Velux · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Nozzle type: Main nozzle · Drive: Slot · Nozzle thread: M3.5x0.6 (standard thread) · Total length: 6 mm · Nozzle size: 64 · Nozzle size: 66 · Nozzle size: 68 · Nozzle size: 70 · Nozzle size: 72 · Nozzle size: 74
EUR 18,60
18.5 mm intake manifold Dell'Orto PHBG | Puch E50
Total length: 40 mm · Ø inside: 18.8 mm · Material: Aluminum · Camouflaged: No · Surface: polished · Color: Chrome · Area of application: Tuning · Mounting type: Screws · Total height: 57 mm · Height flange center hole: 45 mm · Ø External connection: 23.9 mm · Number of fixing points: 2 pcs · Hole spacing inlet: 38 mm
EUR 21,00
swiing nozzle set M5 (70 - 92) Dell'Orto SHA, PHBG
Total length: 8 mm · Manufacturer: swiing · Material: Brass · Quantity: 10 pcs · Carburetor type: PHBG · Carburetor type: SHA (type 3) · Carburetor type: SHA (type 4) · Nozzle type: Main nozzle · Nozzle thread: M5x0.8 (standard thread) · Drive: Slot · Nozzle size: 70 · Nozzle size: 72 · Nozzle size: 75 · Nozzle size: 78 · Nozzle size: 80 · Nozzle size: 82 · Nozzle size: 85 · Nozzle size: 88 · Nozzle size: 90 · Nozzle size: 92
EUR 24,50
Collection only possible with online purchase and appointment.
