Shaft seal ring for the 13 mm pinion shaft of mopeds / mopeds with Sachs 50 engines
This radial shaft seal ring fits the old version, with 13.0 mm shaft seal ring or felt ring on the main shaft, these pinion shafts also have Ø 8 x 4 mm roller bearings installed.
Ø inner: 13 mm
Ø outer: 25 mm
Width: 5 mm
Material: NBR
Temperature resistant: approx. -30 to +100 °C, briefly up to 120 °C
Type: AS - with rubberized outer casing, one sealing lip and one dust lip
The set includes the following fixed parts:
Details
| Temperature resistance (min.) | -30 - 100 °C |
| Simmering type | AS - With rubberized outer casing / one sealing lip / one dust lip. |
| Manufacturer | Sachs |
| Material | NBR |
| Surface | rubberized |
| Width | 5 mm |
| Ø outside | 25 mm |
| Place of use | Pinion shaft |
| Ø inside | 13 mm |
Suitable for the following models
| Sachs | 50 (Fahrtwind, 1.25 / 1.5 PS, DE) |
Accessories & related products
WEKEM 2K liquid metal
Temperature resistance (min.): -20 - 80 °C · Manufacturer: WEKEM · Material to be used: Aluminum · Material to be used: Ceramics · Material to be used: Metal · Material to be used: Steel · Material to be used: Wood · Type of application: 2K · Area of application: Chemistry · Color: gray · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: Toxic to aquatic organisms (with long-term effects) · Signal word: Attention · Contents [ml]: 24 ml · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Alignment time: 240 sec
EUR 22,40
EUR 448,00/kg
GPO gasket set 40 - 41 mm cylinder fan-cooled | Puch X30 NG-2AH, Velux
Manufacturer: GPO · Area of application: Tuning · Ø cylinder: 40 mm · Ø cylinder: 41 mm · Ø outlet inside: 22 mm · Hole spacing outlet: 42 mm · Hole pattern [mm]: 44 x 44 mm · Number of components: 4 pcs · Decompressor: Yes · Hole spacing inlet: 38 mm
EUR 10,00
Moped fans like you also bought:
NSK E15 shoulder ball bearing 15/35/8 (A1149)
Bearing type: Shoulder bearing · Bearing cage: Brass cage ball-guided · Stock number: E15 · Inner ring width: 8 mm · Manufacturer: NSK · Bearing clearance: CN (standard) · Groove ring: No · Material: Brass · Material: Steel · Area of application: Standard · Surface: blank · Width: 8 mm · Ø outside: 35 mm · Ø inside: 15 mm · Ball bearing closed: No · Pony spare part no.: A1149 · Sachs spare part no.: 0232 017 006
EUR 28,10
GPO ball bearing countershaft | Sachs 50/2, 50/3, 50/4, 503 2AL/2BL (A2531)
Bearing type: Deep groove ball bearing · Width: 8 mm · Width: 25.6 mm · Manufacturer: GPO · Ball bearing closed: No · Bearing clearance: CN (standard) · Bearing cage: "-" Sheet steel cage ball-guided · Thread type: MF20x1 (fine pitch thread) · Material: Steel · Surface: blank / oiled · Ø inside: 15 mm · Ø outside: 35 mm · Area of application: Standard · Pony spare part no.: A2531 · Sachs spare part no.: 0286 079 105
EUR 39,30
Oil seal NBR 24.8/31.4/4 A Brake shaft | Sachs 50
Simmering type: A - With rubberized outer part / one sealing lip. · Ø inside: 24.8 mm · Manufacturer: Sachs · Material: NBR · Surface: rubberized · Place of use: Clutch cover · Width: 4 mm · Ø outside: 31.4 mm · Temperature resistance (min.): -30 - 100 °C
EUR 6,55
GPO gasket set with oil seals slotted version | Sachs 50/2 engine
Manufacturer: GPO · Area of application: Standard · Ø outlet inside: 28 mm · Hole spacing inlet: 31 mm · Number of components: 14 pcs · Hole pattern [mm]: 60 x 40 · Pony spare part no.: A2582 · Sachs spare part no.: 0286 156 001
EUR 45,00
swiing® revival ball bearing countershaft | Sachs 50/2, 50/3, 50/4, 503 2AL/2BL (A2531)
Bearing type: Deep groove ball bearing · Bearing cage: "-" Sheet steel cage ball-guided · Stock number: E15 · Inner ring width: 25.6 mm · Manufacturer: swiing® revival parts · Bearing clearance: CN (standard) · Material: Steel · Area of application: High End · Area of application: Standard · Thread type: MF20.8x1 LH (fine/left-hand thread) · Width: 8 mm · Ø outside: 35 mm · Ø inside: 15 mm · Pony spare part no.: A2531 · Sachs spare part no.: 0286 079 105
EUR 56,20
Oil seal NBR 16/24/4 A Pedal start mechanism | Sachs 50/2, 50/3, 50/4
Temperature resistance (min.): -30 - 100 °C · Simmering type: A - With rubberized outer part / one sealing lip. · Ø inside: 16 mm · Ø outside: 24 mm · Width: 4 mm · Manufacturer: Sachs · Material: NBR · Surface: rubberized
EUR 6,65
Collection only possible with online purchase and appointment.
