Shaft seal ring 24.8x31.4x4 mm for use on the starting mechanism for your Sachs 50, 50/2, 50/3, 50/4 engine on your moped & moped.
This radial shaft seal ring is installed in the clutch cover on the bushing for the brake shaft and the pedal start mechanism of Sachs engines.
Ø inside: 24.8 mm
Ø outside: 31.4 mm
Width: 4 mm
Material: NBR
Temperature resistant: -30 to +100 °C, briefly up to 120 °C
Type: A - With rubberized outer casing and a sealing lip.
Original Sachs spare part number: 0250 083 000
Details
| Temperature resistance (min.) | -30 - 100 °C |
| Simmering type | A - With rubberized outer part / one sealing lip. |
| Manufacturer | Sachs |
| Material | NBR |
| Surface | rubberized |
| Place of use | Clutch cover |
| Ø outside | 31.4 mm |
| Ø inside | 24.8 mm |
| Width | 4 mm |
Suitable for the following models
| Sachs | 50 (Fahrtwind, 1.25 / 1.5 PS, DE) 50/3 |
Accessories & related products
Loctite 243 medium-strength threadlocker 10 ml
Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Contents [ml]: 10 ml · Color: blue · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Adhesion: medium strength · Temperature resistance (min.): -75 - 200 °C · Gap dimension (max.): 0.01 mm · Type of application: 1K · Alignment time: 600 sec · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m · Area of application: Chemistry
EUR 24,70
EUR 2.470,00/l
Loctite 638 High-strength adhesive 10 ml
Color: green · Manufacturer: Loctite · Area of application: Chemistry · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Contents [ml]: 10 ml · Hazard warning: Causes serious eye damage · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Danger · Hazard pictogram: GHS05 - Corrosive · Hazard pictogram: GHS07 - Caution dangerous · Adhesion: high-strength · Gap dimension (max.): 0.25 mm · Temperature resistance (min.): -75 - 150 °C · Type of application: 1K · Alignment time: 300 sec · Breakaway torque (according to material): 23 N/m · Breakaway torque (according to material): 25 N/m · Breakaway torque (according to material): 57 N/m
EUR 24,70
EUR 2.470,00/l
GPO oil seal set | Sachs 3-speed pedal start
Manufacturer: GPO · Ø inside: 10 mm · Ø inside: 13 mm · Ø inside: 14 mm · Ø inside: 15 mm · Ø inside: 16 mm · Ø inside: 24 mm · Ø outside: 16 mm · Ø outside: 19 mm · Ø outside: 24 mm · Ø outside: 30 mm · Ø outside: 31.4 mm · Ø outside: 31.5 mm · Width: 2.5 mm · Width: 3.5 mm · Width: 4 mm · Width: 4.5 mm · Width: 7 mm
EUR 33,70
Simmerring set Sachs 2-speed pedal start
Ø inside: 12.96 mm · Ø inside: 13.8 mm · Ø inside: 15 mm · Ø inside: 16 mm · Ø inside: 31.4 mm · Ø outside: 19 mm · Ø outside: 24 mm · Ø outside: 24.8 mm · Ø outside: 30 mm · Ø outside: 31.5 mm · Width: 2.5 mm · Width: 3.5 mm · Width: 4 mm · Width: 7 mm
EUR 28,10
Moped fans like you also bought:
swiing® ingenious puller L17 / BO15 / E15 shoulder bearing
Width across flats (trigger): 8 mm · Width across flats (trigger): 19 mm · Span: 24 mm · Manufacturer: swiing® ingenious parts · Clamping depth: 10 mm · Peel-off tray: BO15 · Peel-off tray: E15 · Peel-off tray: L17 · Surface: blue galvanized · Area of application: (Dis)assembly tool · Thread type: M6x1 (standard thread) · Thread type: M8x1.25 (standard thread) · Diameter: 24 mm · Diameter: 40.3 mm · Total length: 120 mm · Number of components: 1 pcs
EUR 49,50
Not in stock
NSK E15 shoulder ball bearing 15/35/8 (A1149)
Bearing cage: Brass cage ball-guided · Stock number: E15 · Inner ring width: 8 mm · Manufacturer: NSK · Bearing clearance: CN (standard) · Groove ring: No · Material: Brass · Material: Steel · Surface: blank · Bearing type: Shoulder bearing · Width: 8 mm · Ø outside: 35 mm · Ø inside: 15 mm · Ball bearing closed: No · Area of application: Standard · Pony spare part no.: A1149 · Sachs spare part no.: 0232 017 006
EUR 28,10
Oil seal NBR 16/24/4 A Pedal start mechanism | Sachs 50/2, 50/3, 50/4
Temperature resistance (min.): -30 - 100 °C · Simmering type: A - With rubberized outer part / one sealing lip. · Ø inside: 16 mm · Ø outside: 24 mm · Width: 4 mm · Manufacturer: Sachs · Material: NBR · Surface: rubberized
EUR 6,65
Oil seal NBR 15/25/5 AS 15 mm pinion shaft | Sachs 50
Place of use: Pinion shaft · Temperature resistance (min.): -30 - 100 °C · Simmering type: AS - With rubberized outer casing / one sealing lip / one dust lip. · Ø inside: 15 mm · Ø outside: 25 mm · Width: 5 mm · Manufacturer: Sachs · Material: NBR · Surface: rubberized
EUR 10,00
Collection only possible with online purchase and appointment.
