CNC machined reed box for the ADDY GME engine housing «Der.prüfstand» on your Puch moped / moped.
The diaphragm holder is neatly finished, fits perfectly and offers a massive passage of 39.5 x 26 mm.
Due to the sloping upper surface of the diaphragm box and the possibility to rotate it 180 degrees, it is possible to align the nozzle and carburetor mounted on it somewhat steeper or flatter.
Note: The box is intended for installation with sealing compound. If you prefer oil paper, you will find suitable sealing paper in the accessories, which you can cut to size yourself.
Details
| Material | Aluminum |
| Thread type | M6x1 (standard thread) |
| Total length | 48 mm |
| Width | 66 mm |
| Hole pattern [mm] | 37 x 55 |
| Hole spacing | 52 mm |
Suitable for the following models
| Puch | E50 |
Accessories & related products
Stage6 R/T RT-PWK 28 mm carburetor *Black Edition*
Manufacturer: Stage6 R/T · Area of application: Tuning · Color: black · Surface: varnished · Carburetor type: RT-PWK · Nominal diameter: 28 mm · Mounting type: Flange · Mounting type: Plug connection · Ø Air filter connection: 50 mm · Mixed oil connection: Yes · Vacuum connection: Yes · Choke control: Hand choke · Nozzle thread: M5x0.8 (standard thread)
EUR 197,10
Stage6 R/T RT-PWK 24 mm carburetor Stage6 *Black Edition*
Manufacturer: Stage6 R/T · Area of application: Tuning · Color: black · Surface: varnished · Carburetor type: RT-PWK · Nominal diameter: 24 mm · Mounting type: Flange · Mounting type: Plug connection · Ø Air filter connection: 50 mm · Mixed oil connection: Yes · Vacuum connection: Yes · Choke control: Hand choke · Nozzle thread: M5x0.8 (standard thread)
EUR 189,20
Not in stock
Moped fans like you also bought:
HK Clutch "Racing" Kickstarter | Puch E50
Manufacturer: HK Clutches · Area of application: Racing · Material: Steel · Material addition: Aluminum · Number of springs: 3 pcs · Number of jaws: 3 pcs · Ø inside: 13.6 mm · Ø inside: 14.6 mm · Ø outside: 93 mm · Recording type: Cone mounting · Thickness: 20.3 mm
EUR 349,30
Stage6 R/T RT-PWK 24 mm carburetor Stage6 *Black Edition*
Manufacturer: Stage6 R/T · Area of application: Tuning · Color: black · Surface: varnished · Carburetor type: RT-PWK · Nominal diameter: 24 mm · Mounting type: Flange · Mounting type: Plug connection · Ø Air filter connection: 50 mm · Mixed oil connection: Yes · Vacuum connection: Yes · Choke control: Hand choke · Nozzle thread: M5x0.8 (standard thread)
EUR 189,20
Not in stock
swiing® ingenious crankshaft High End with mounted bearings (Version 2.0) | Puch E50
Manufacturer: swiing® ingenious parts · Material: Aluminum · Area of application: High End · Area of application: Racing · Material: Steel · Area of application: Tuning · Cheek type: Full cheeks · Crankshaft stroke: 43 mm · Thread type: MF10x1 (fine pitch thread) · Connecting rod length center-center: 90 mm · Total length of crankpin on clutch side: 74 mm · Total length crankpin ignition side: 66 mm · Ø crank webs: 69.9 mm · Ø piston pin (B): 12 mm · Ø Connecting rod eye: 15 mm · Weight: 968 g · Ø Bearing seat (clutch side): 17 mm · Ø Bearing seat (ignition side): 17 mm · Thread length: 11 mm · Thread length: 15 mm · Dimension needle bearing: 12 / 15 x 14.2 mm (axe 12) · Wide crank webs: 34 mm · Length 1st paragraph: 9 mm · Length 2nd paragraph: 14.5 mm · Length 3rd paragraph: 25 mm · Ø 1st step (on the coupling side): 22 mm · Ø 2nd shoulder (on the clutch side): 17 mm · Ø 3rd step (on the clutch side): 15 mm · Length of shoulder (ignition side): 26.3 mm · Number of gears: 1 pcs
EUR 201,60
Not in stock
Collection only possible with online purchase and appointment.
