Professionally machined and spindled to 52 mm ADDY E50 4-bearing racing engine housing with GME (housing-membrane intake) for your Puch moped / moped.
This racing gear is the «der.prüfstand» edition, which is produced exclusively for mofakult. The massive 39.5 x 26 mm intake provides plenty of steam with the diaphragm system provided for this purpose. No modifications to the Puch Maxi frame are required to install the engine.
Details
| Manufacturer | ADDY |
| Material | Aluminum |
Suitable for the following models
| Puch | E50 |
Accessories & related products
Parmakit 47 mm cylinder kit with cylinder head | Puch
Manufacturer: Parmakit · Area of application: Tuning · Material: Aluminum · Surface: sandblasted · Nominal diameter: 47 mm · Displacement: 75 ccm · Crankshaft stroke: 43 mm · Ø piston pin (B): 12 mm · Ø cylinder neck: 51 mm · Ø outlet inside: 27.5 mm · Inlet window: 30 x 18 · Thread inlet: M6x1 (standard thread) · Hole spacing inlet: 46 mm · Outlet type: slanted · Hole spacing outlet: 46 mm · Thread outlet: M6x1 (standard thread) · Number of fixing points: 4 pcs · Hole pattern [mm]: 44 x 44 · Decompressor: No · Camouflaged: No
EUR 468,80
Stage6 R/T RT-PWK 28 mm carburetor *Black Edition*
Manufacturer: Stage6 R/T · Surface: varnished · Color: black · Mounting type: Flange · Mounting type: Plug connection · Carburetor type: RT-PWK · Nozzle thread: M5x0.8 (standard thread) · Nominal diameter: 28 mm · Area of application: Tuning · Ø Air filter connection: 50 mm · Mixed oil connection: Yes · Vacuum connection: Yes · Choke control: Hand choke
EUR 205,00
Stage6 R/T RT-PWK 24 mm carburetor Stage6 *Black Edition*
Manufacturer: Stage6 R/T · Surface: varnished · Color: black · Mounting type: Flange · Mounting type: Plug connection · Carburetor type: RT-PWK · Nozzle thread: M5x0.8 (standard thread) · Nominal diameter: 24 mm · Area of application: Tuning · Ø Air filter connection: 50 mm · Mixed oil connection: Yes · Vacuum connection: Yes · Choke control: Hand choke
EUR 196,80
Not in stock
Moped fans like you also bought:
HK Clutch "Racing" Kickstarter | Puch E50
Manufacturer: HK Clutches · Material: Steel · Material addition: Aluminum · Ø inside: 13.6 mm · Ø inside: 14.6 mm · Ø outside: 93 mm · Recording type: Cone mounting · Number of jaws: 3 pcs · Number of springs: 3 pcs · Thickness: 20.3 mm · Area of application: Racing
EUR 363,30
Stage6 R/T RT-PWK 24 mm carburetor Stage6 *Black Edition*
Manufacturer: Stage6 R/T · Surface: varnished · Color: black · Mounting type: Flange · Mounting type: Plug connection · Carburetor type: RT-PWK · Nozzle thread: M5x0.8 (standard thread) · Nominal diameter: 24 mm · Area of application: Tuning · Ø Air filter connection: 50 mm · Mixed oil connection: Yes · Vacuum connection: Yes · Choke control: Hand choke
EUR 196,80
Not in stock
swiing® ingenious crankshaft High End with mounted bearings (Version 2.0) | Puch E50
Dimension needle bearing: 12 / 15 x 14.2 mm (axe 12) · Manufacturer: swiing® ingenious parts · Material: Aluminum · Material: Steel · Cheek type: Full cheeks · Crankshaft stroke: 43 mm · Thread type: MF10x1 (fine pitch thread) · Connecting rod length center-center: 90 mm · Total length of crankpin on clutch side: 74 mm · Total length crankpin ignition side: 66 mm · Thread length: 11 mm · Thread length: 15 mm · Ø crank webs: 69.9 mm · Ø piston pin (B): 12 mm · Area of application: High End · Area of application: Racing · Area of application: Tuning · Ø Connecting rod eye: 15 mm · Weight: 968 g · Ø Bearing seat (clutch side): 17 mm · Ø Bearing seat (ignition side): 17 mm · Wide crank webs: 34 mm · Length 1st paragraph: 9 mm · Length 2nd paragraph: 14.5 mm · Length 3rd paragraph: 25 mm · Ø 1st step (on the coupling side): 22 mm · Ø 2nd shoulder (on the clutch side): 17 mm · Ø 3rd step (on the clutch side): 15 mm · Length of shoulder (ignition side): 26.3 mm · Number of gears: 1 pcs
EUR 209,70
Not in stock
Collection only possible with online purchase and appointment.
