For the economical repair of damaged or worn threads (of all materials) and as a design element for thread reinforcement when using materials with low shear strength (e.g. aluminum, aluminum-magnesium alloys). The use of wear-free HeliCoil thread inserts not only repairs the thread but also increases the thread load-bearing capacity.
Execution:
High-strength, free-running HeliCoil®plus thread inserts made of stainless steel with high wear resistance, low thread friction in tight tolerances, high surface strength as well as corrosion resistance and heat resistance. The flexible design enables even load and stress distribution and thus produces durable screw connections of the highest quality for all operating loads (static, dynamic) with ideal force transmission. Uncomplicated, quick assembly, creates an internal thread that is true to gauge and can be used on both sides.
Complete repair kit for M10 thread sizes in a plastic case.
Application:
1. Drill out the defective thread with the enclosed drill.
2. Check the tap and threaded bolt.
3. Cut the holding thread with the special HeliCoil tap.
4. Turn the thread insert into the holding thread using the installation tool.
5. Remove the tang with the tang breaker
Scope of delivery
- 1 pc. twist drill Ø10.5 mm
- 1 pc. Thread cutter
- 1 pc. Installation tool
- 1 pc. Tang breaker
- 10 pcs. HeliCoil thread insert (1×D)
- 10 pcs. HeliCoil threaded insert (1.5×D)
- 10 pcs. HeliCoil threaded insert (2×D)
- 1 pc. Plastic case 180×165×45 mm (L×B×H)
Note
Adetailed instruction is included.
Original HeliCoil product from the German manufacturer Böllhoff.
Details
| Total length | 10 mm, 15 mm, 20 mm |
| Ø bore | 10.5 mm |
| Storage method | Suitcase |
| Manufacturer | HeliCoil |
| Area of application | Workshop accessories |
| Material | Chrome steel (known as Nirosta®) |
| Number of components | 30 pcs |
| Nominal diameter (thread) | 10 mm |
| Dimension thread insert | 1D, 1.5D, 2D |
| Dimension storage box | 180 x 165 x 45 mm |
| Thread type | M10x1.5 (standard thread) |
Accessories & related products
Amecoil insert M10 (1D) 10 mm Inox
Manufacturer: Amecoil · Material: Chrome steel (known as Nirosta®) · Thread size: M10 · Thread size: M6 · Thread size: M7 · Thread size: M8 · Total length: 5 mm · Total length: 6 mm · Total length: 7 mm · Total length: 9 mm · Total length: 10 mm · Total length: 12 mm · Nominal diameter (thread): 5 mm · Nominal diameter (thread): 6 mm · Nominal diameter (thread): 7 mm · Nominal diameter (thread): 8 mm · Nominal diameter (thread): 9 mm · Nominal diameter (thread): 10 mm
EUR 1,05
Moped fans like you also bought:
swiing® revival M8x12 oil drain plug & copper ring | Puch E50, Z50
Manufacturer: swiing® revival parts · Width across flats Screw: 13 mm · Material: Copper · Material: Steel · Surface: galvanized (blue) · Color: silver · Screw head: Hexagon · Thread type: M8x1.25 (standard thread) · Drive: External hexagon · Drive: Slot · Total length: 18 mm · Thread length: 12 mm · Puch OEM number: 901.1053
EUR 4,05
Hot 
swiing® ingenious "Expert" motor stand
Manufacturer: swiing® ingenious parts · Material: Steel · Surface: varnished · Color: red · Color: white · Total length: 370 mm · Hole spacing: 21.5 mm · Material thickness: 3.5 mm · Ø Receptacle: 25 mm · Ø Receptacle: 35 mm · Height: 340 mm · Width: 245 mm · Area of application: Motor bracket
EUR 86,40
HeliCoil thread repair set M8 (professional tool)
Manufacturer: HeliCoil · Material: Chrome steel (known as Nirosta®) · Surface: coated · Area of application: Workshop accessories · Thread type: M8x1.25 (standard thread) · Nominal diameter (thread): 8 mm · Dimension thread insert: 1D · Dimension thread insert: 1.5D · Dimension thread insert: 2D · Ø bore: 8.4 mm · Total length: 8 mm · Total length: 12 mm · Total length: 16 mm · Number of components: 30 pcs · Storage method: Suitcase · Dimension storage box: 180 x 165 x 45 mm
EUR 92,30
MVT internal rotor ignition incl. rev limiter & light 12V | Puch / Sachs
Ø cable: 7 mm · Manufacturer: MVT Allumage · Manufacturer: swiing · Tension: 12 V · Performance: 65 W · Direction of rotation: left · Ø mounting plate: 96 mm · Ø Flywheel outside: 49.2 mm · Mounting type: Screws · Number of fixing points: 2 pcs · Area of application: Tuning · Weight: 268 g
EUR 421,30
swiing® ingenious pull starter | Puch E50 MVT ignition
Manufacturer: swiing® ingenious parts · Material: Plastic · Material: Steel · Surface: chrome-plated · Surface: raw · Color: Chrome · Color: black-matt · Ignition system: MVT Allumage · Total length: 170 mm · Hole spacing: 138 mm · Height: 82 mm · Ø outside: 130 mm · Width: 150 mm · Number of fixing points: 2 pcs
EUR 173,10
Hot
MLM exhaust "Crazy Pipe" black straight outlet | Puch
Manufacturer: MLM · Material: Steel · Surface: varnished · Ø outside: 91 mm · Total length: 945 mm · Color: black · Ø Silencer: 45 mm · Ø Internal connection: 22 mm · Exhaust type: Cone / double cone · Mounting type: Nuts & bolts · Number of fixing points: 3 pcs · Flame tube attachment: Stud bolts & nuts
EUR 398,20
Not in stock
Collection only possible with online purchase and appointment.
