Flange gasket for the blower-cooled BADASS Lucifer 41 mm and the GPO Sombrero cylinder kit, suitable for your Puch X30 Velux and with adaptations to your Puch X30 NG-2AH moped / moped.
This intake manifold gasket is an absolute perfect fit and of the highest quality.
Good, inexpensive standard spare part. GPO – GOOD PARTS ONLY.
Details
Manufacturer | GPO |
Material | Oiled paper |
Ø inside | 18 mm |
Place of use | Admission |
Hole spacing inlet | 32 mm |
Thickness | 0.5 mm |
Ø screw holder | 6 mm |
Suitable for the following models
Puch | ZA50 (Gebläsegekühlt) Z50 (X30 Velux) 2-Gang MS, MV, MV50 3-Gang VSD, DS, VZ, MC |
Accessories & related products
swiing® revival stud bolt set M6x30 (strength 10.9) galvanized
Manufacturer: swiing® revival parts · Diameter: 6 mm · Material: Steel · Surface: galvanized (blue) · Thread type: M6x1 (standard thread) · Drive: External hexagon · Width across flats SW: 10 mm · Total length: 30 mm · Thread length: 12 mm · Strength class: 8 · Strength class: 10.9
EUR 12,00
BAD ASS Lucifer cylinder Ø 41 mm | Puch X30 Velux, NG-2AH
Manufacturer: BAD ASS · Material: Gray cast iron · Camouflaged: No · Surface: sandblasted · Nominal diameter: 41 mm · Hole spacing inlet: 32 mm · Ø cylinder neck: 44.9 mm · Ø Inlet inside: 19 mm · Ø outlet inside: 25 mm · Number of fixing points: 4 pcs · Ø piston pin (B): 12 mm · Thread inlet: M6x1 (standard thread) · Hole spacing outlet: 42 mm · Decompressor: No · Hole pattern [mm]: 44 x 44 · Area of application: Tuning · Outlet type: straight · Thread outlet: M6x1 (standard thread)
EUR 236,60
GOL piston 41 mm BAD ASS Lucifer | Puch X30 Velux, NG-2AH
Manufacturer: BAD ASS · Nominal diameter: 41 mm · Ø outside piston (A): 40.94 mm · Ø piston pin (B): 12 mm · Compression height (C): 22.4 mm · Curvature (D): 2.4 mm · Total piston height (E): 48.3 mm · Number of piston rings (F): 2 pcs · Piston ring mold: Rectangular ring · Piston ring impact: Internal fuse (IS) · Piston weight: 86 g
EUR 78,80
GOL Piston 45 mm BAD ASS Lucifer BigBore | Puch X30 Velux, NG-2AH
Manufacturer: BAD ASS · Nominal diameter: 45 mm · Ø outside piston (A): 44.94 mm · Ø piston pin (B): 12 mm · Compression height (C): 22.4 mm · Curvature (D): 2.4 mm · Total piston height (E): 48.3 mm · Number of piston rings (F): 2 pcs · Piston ring mold: Rectangular ring · Piston ring impact: Internal fuse (IS) · Piston weight: 105 g
EUR 78,80
Moped fans like you also bought:
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø nipple: 3 mm · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Ø Stranded wire: 1.25 mm · Cable length: 2200 mm · Nipple shape: Cylinder · Nipple length: 5 mm · Number of components: 1 pcs · Area of application: Standard
EUR 3,15
Motorex engine oil (gear oil) manual 450 ml
Temperature resistance (min.): -30 - 220 °C · Manufacturer: Motorex · Oil type: GL4 · Viscosity (SAE): 80W · Gearbox type: Foot control · Gearbox type: Manual gearshift · Contents [ml]: 450 ml · Area of application: Gearbox lubrication with clutch
EUR 11,20
EUR 24,89/l
swiing® revival stud bolt set M6x30 (strength 10.9) galvanized
Manufacturer: swiing® revival parts · Diameter: 6 mm · Material: Steel · Surface: galvanized (blue) · Thread type: M6x1 (standard thread) · Drive: External hexagon · Width across flats SW: 10 mm · Total length: 30 mm · Thread length: 12 mm · Strength class: 8 · Strength class: 10.9
EUR 12,00
swiing® ingenious 17 mm SRF carburetor tuning camouflaged | Sachs 503, Puch Velux
Manufacturer: swiing® ingenious parts · Camouflaged: Yes · Material: Aluminum · Surface: blank · Carburetor type: SRE · Nominal diameter: 17 mm · Total length: 61.5 mm · Ø Internal connection: 23 mm · Width: 47 mm · Height: 89 mm · Height: 112 mm · Ø Inside entrance: 17 mm · Ø Output inside: 17.1 mm · Ø Air filter connection: 23 mm · Ø fuel hose connection: 5 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle block: 2.2 · Nozzle size: 74 · Mounting type: Plug connection clamped · Clamping screw torque (max.): 3 N/m · Clamping screw torque (max.): 4 N/m · Area of application: Tuning
EUR 135,10
swiing® ingenious 17 mm intake manifold | Puch X30 Velux
Manufacturer: swiing® ingenious parts · Camouflaged: No · Material: Aluminum · Surface: anodized · Ø inside: 17 mm · Ø External connection: 23 mm · Mounting type: Stud bolt · Hole spacing inlet: 32 mm · Number of fixing points: 2 pcs · Area of application: Tuning
EUR 56,20