45.0 mm piston with two 1.5 mm rectangular piston rings with internal circlips (IS) for your moped / moped with blown BAD ASS Lucifer 45.00 mm cylinder on Puch X30 Velux and Puch X30 NG-2AH engines. The piston kit is used for the 45 mm cylinder variant.
The detailed dimensioning of the piston according to the technical drawing can be found in the details. You can also find out about the relevant piston rings, their stems and locking types on the legend in the pictures.
The piston kit contains piston pins, piston clips and piston rings.
You will find the corresponding assembly tool, piston pin locks and, if necessary, the corresponding cylinder in the accessories section.
Quality product from the Italian manufacturer GOL.
Details
| Manufacturer | BAD ASS |
| Ø outside piston (A) | 44.94 mm |
| Compression height (C) | 22.4 mm |
| Curvature (D) | 2.4 mm |
| Total piston height (E) | 48.3 mm |
| Number of piston rings (F) | 2 pcs |
| Nominal diameter | 45 mm |
| Piston ring mold | Rectangular ring |
| Ø piston pin (B) | 12 mm |
| Piston ring impact | Internal fuse (IS) |
| Weight | 105 g |
Suitable for the following models
| Puch | ZA50 (Gebläsegekühlt) Z50 (X30 Velux) 2-Gang MS, MV, MV50 3-Gang VSD, DS, VZ, MC |
Accessories & related products
swiing® ingenious 15 mm carburetor set camouflaged | Puch X30 Velux
Nominal diameter: 15 mm · Manufacturer: swiing® ingenious parts · Carburetor type: SRE · Ø Internal connection: 20 mm · Ø Inside entrance: 15 mm · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Ø Air filter connection: 23 mm · Hole spacing inlet: 32 mm · Ø fuel hose connection: 6 mm · Choke control: Hand choke · Nozzle thread: M3.5 · Nozzle size: 62 · Area of application: Tuning · Mounting type: Flange · Mounting type: Plug connection clamped
EUR 138,40
swiing resonance exhaust set Ø 28 / 70 mm | Puch X30 Velux
Manufacturer: swiing · Material: Steel · Surface: chrome-plated · Ø outside: 70 mm · Total length: 730 mm · Color: Chrome · Ø Internal connection: 28 mm · Exhaust type: Cigar · Mounting type: Screwed clamp · Flame tube attachment: Flange
EUR 169,00
swiing® revival stud bolt set M6x30 (strength 10.9) galvanized
Manufacturer: swiing® revival parts · Material: Steel · Surface: blue galvanized · Diameter: 6 mm · Thread type: M6x1 (standard thread) · Drive: External hexagon · Width across flats SW: 10 mm · Strength class: 8 · Strength class: 10.9 · Total length: 30 mm · Thread length: 12 mm
EUR 12,00
BAD ASS Lucifer BigBore cylinder Ø 45 mm | Puch X30 Velux, NG-2AH
Manufacturer: BAD ASS · Material: Gray cast iron · Area of application: Tuning · Displacement: 70 ccm · Crankshaft stroke: 43 mm · Ø piston pin (B): 12 mm · Nominal diameter: 45 mm · Ø cylinder neck: 49 mm · Ø Outlet outside: 26 mm · Ø Inlet inside: 19 mm · Thread inlet: M6x1 (standard thread) · Number of fixing points: 4 pcs · Ø outlet inside: 25 mm · Hole spacing outlet: 42 mm · Outlet type: straight · Hole spacing inlet: 32 mm · Thread outlet: M6x1 (standard thread) · Hole pattern [mm]: 44 x 44
EUR 281,70
Not in stock
GPO cylinder gasket set BAD ASS Lucifer 45 mm | Puch X30 Velux, NG-2AH
Manufacturer: GPO · Material: Aluminum · Material: Sealing paper · Ø cylinder: 45 mm · Number of components: 4 pcs · Ø outlet inside: 27 mm · Thickness: 0.4 mm · Thickness: 0.45 mm · Hole spacing inlet: 32 mm · Hole spacing outlet: 42 mm · Hole pattern [mm]: 44 x 44 mm · Decompressor: Yes · Area of application: Tuning
EUR 22,40
Moped fans like you also bought:
swiing® revival snap ring low control bearing set (version 2.0)
Nominal diameter: 20 mm · Nominal diameter: 28 mm · Manufacturer: swiing® revival parts · Material: Spring steel · Surface: blank · Thickness: 0.6 mm · Height: 7 mm · Puch spare part no.: 349.1.30.015.1 · Sachs spare part no.: P0521
EUR 2,80
Motorex engine oil (gear oil) manual 450 ml
Manufacturer: Motorex · Oil type: GL4 · Viscosity (SAE): 80W · Contents [ml]: 450 ml · Gearbox type: Foot control · Gearbox type: Manual gearshift · Temperature resistance (min.): -30 - 220 °C · Area of application: Gearbox lubrication with clutch
EUR 11,20
EUR 24,89/l
Magura cable clamp Ø 6 x 14 mm
Manufacturer: Magura · Material: Chrome steel (stainless steel) · Material: Steel · Surface: blank · Surface: blue galvanized · Thread type: M5x0.8 (standard thread) · Ø Cable bushing: 2.2 mm · Drive: External hexagon · Drive: Slot · Screw head: Hexagon · Width across flats SW: 5 mm · Width across flats SW: 6 mm · Ø outside: 6 mm · Total length: 14 mm · Total length: 20 mm · Thread length: 6.5 mm · Area of application: Standard
EUR 2,25
Magura cable clamp Ø 6 x 9
Manufacturer: Magura · Material: Chrome steel (stainless steel) · Material: Steel · Surface: blank · Surface: blue galvanized · Thread type: M4x0.7 (standard thread) · Number of components: 1 pcs · Ø Cable bushing: 2.5 mm · Drive: External hexagon · Drive: Slot · Screw head: Hexagon · Width across flats SW: 6 mm · Ø outside: 6 mm · Total length: 9 mm · Thread length: 5 mm · Area of application: Standard
EUR 2,25
Collection only possible with online purchase and appointment.
