Clutch plates (2 pieces) for manually shifted Sachs engines.
These clutch plates are a special, slightly thicker version.
We do not know on which models these clutch plates were originally installed. If you can provide us with any further information,
Good, inexpensive standard spare part. GPO – GOOD PARTS ONLY.
Details
Manufacturer | GPO |
Thickness | 3.8 mm |
Area of application | Standard |
Number of slats | 2 pcs |
Suitable for the following models
Sachs | 50 (Fahrtwind, 1.25 / 1.5 PS, DE) |
Moped fans like you also bought:
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø nipple: 3 mm · Nipple length: 5 mm · Manufacturer: Made in Germany · Area of application: Standard · Material: Steel · Surface: blue galvanized · Number of components: 1 pcs · Ø Stranded wire: 1.25 mm · Nipple shape: Cylinder · Cable length: 2200 mm
EUR 3,15
Motorex engine oil (gear oil) manual 450 ml
Manufacturer: Motorex · Viscosity (SAE): 80W · Area of application: Gearbox lubrication with clutch · Oil type: GL4 · Contents [ml]: 450 ml · Gearbox type: Foot control · Gearbox type: Manual gearshift · Temperature resistance (min.): -30 - 220 °C
EUR 11,20
EUR 24,89/l
NSK E15 shoulder ball bearing 15/35/8 (A1149)
Width: 8 mm · Bearing type: Shoulder bearing · Stock number: E15 · Inner ring width: 8 mm · Manufacturer: NSK · Ball bearing closed: No · Ø inside: 15 mm · Ø outside: 35 mm · Bearing clearance: CN (standard) · Bearing cage: Brass cage ball-guided · Groove ring: No · Material: Brass · Area of application: Standard · Material: Steel · Surface: blank · Pony spare part no.: A1149 · Sachs spare part no.: 0232 017 006
EUR 28,10
swiing® revival gearbox cover gasket | Sachs 503 AAL, ABL, AB, AC, ADV, 2AL, 2BL (A1888)
Width: 130 mm · Total length: 200 mm · Manufacturer: swiing® revival parts · Material: Sealing paper · Color: sand-colored · Number of components: 1 pcs · Thickness: 0.35 mm · Number of fixing points: 6 pcs · Pony spare part no.: A1888 · Sachs spare part no.: 0250 150 000
EUR 6,10
GPO ball bearing countershaft | Sachs 50/2, 50/3, 50/4, 503 2AL/2BL (A2531)
Width: 8 mm · Width: 25.6 mm · Bearing type: Deep groove ball bearing · Manufacturer: GPO · Ball bearing closed: No · Ø inside: 15 mm · Ø outside: 35 mm · Bearing clearance: CN (standard) · Bearing cage: "-" Sheet steel cage ball-guided · Area of application: Standard · Material: Steel · Surface: blank / oiled · Thread type: MF20x1 (fine pitch thread) · Pony spare part no.: A2531 · Sachs spare part no.: 0286 079 105
EUR 45,00
EUR 56,20