Complete CDI ignition for left-turning engines. Ignition is with light and has an operating voltage of 6V and 12 amps.
Connection of the supplied 6/12V voltage regulator:
- Pin 1: Yellow, current-carrying cable from the light coil
- Pin 2: Yellow cable to light
- Pin 3: Ground
The blue cable from the ignition switch (black part on the base plate) goes directly to the ignition coil. Because the ignition is contactless, the ignition can of course only be adjusted with a strobe light and a mark for the desired ignition time must first be attached to the magnetic flywheel and motor housing. The light coil is at the bottom, the switchgear at the top.
The strobe lamp and other useful items can be found under accessories.
Good, inexpensive standard spare part. GPO – GOOD PARTS ONLY.
The set includes the following fixed parts:
Manufacturer: GPO · Material: Steel · Tension: 6 V, 12 V · Direction of rotation: left · Cone ratio: 1:5 · Ø Internal flywheel: 90.9 mm · Ø Flywheel outside: 116.5 mm · Thread type: MF26x1.5 (fine pitch thread) · Weight: 900 g
Manufacturer: CEAB · Material: Plastic · Tension: 6 V · Type of current: Alternating current (AC) · Mounting type: Screws · Ø mounting hole: 6 mm
Manufacturer: GPO · Material: Aluminum, Copper, Plastic, Steel · Color: gray · Tension: 6 V, 12 V · Number of cables: 2 pcs · Cable length: 580 mm · Ø inside: 18.5 mm · Ø Internal flywheel: 90 mm · Ø outside: 90 mm · Number of fixing points: 4 pcs · Ø bolt circle: 80 mm · Area of application: Standard, Performance
Manufacturer: GPO · Color: black · Ø cable holder: 7 mm · Total length: 560 mm · Number of fixing points: 2 pcs · Hole spacing: 80 mm · Area of application: Standard
Details
| Manufacturer | GPO |
| Area of application | Standard, Performance |
| Tension | 6 V |
| Direction of rotation | left |
| Ø mounting plate | 90 mm |
| Number of fixing points | 4 pcs |
| Ø Internal flywheel | 90 mm |
| Mounting type | Screws |
Suitable for the following models
| Puch | ZA50 (Fahrtwindgekühlt) ZA50 (Gebläsegekühlt) Z50 (X30 Sport) Z50 (X30 Velux) 2-Gang MS, MV, MV50 3-Gang VSD, DS, VZ, MC |
| Sachs | 50 (Fahrtwind, 1.25 / 1.5 PS, DE) 502 (Saxonette) - AL, AML 50/2 - L CH (0.8 PS), ML CH (0.8 PS), MB (2.6 PS), MLB (2.6 PS) 50/3 50/4 - MLFB (2.6 PS), LKH (4.5 PS) 50/5 503 - AAL, ABL, 2AL / 2BL, AB, AC, ADV 505 (mit Tretwelle) - 1A (AT), 2 A (HG) 535 |
| Zündapp Belmondo |
Accessories & related products
Hot 
VEC electronic ignition coil (replaces ignition coil, capacitor & contact breaker)
Manufacturer: VEC · Area of application: Original · Area of application: Performance · Area of application: Standard · Color: black · Ø cable holder: 5 mm · Place of use: Internal (in the ignition) · Total length: 77 mm · Height: 48 mm · Number of fixing points: 2 pcs · Ø mounting hole: 4.6 mm · Mounting type: Screws · Hole spacing: 54 mm · Cable length: 140 mm · Cable length: 420 mm · Ø Internal flywheel: 90 mm
EUR 112,60
Not in stock
GPO ignition set CDI anticlockwise 12 V
Manufacturer: GPO · Material: Aluminum · Tension: 12 V · Area of application: Original · Area of application: Standard · Performance: 17 W · Direction of rotation: left · Number of fixing points: 4 pcs · Ø mounting plate: 90 mm · Ø Internal flywheel: 90 mm · Mounting type: Screws
EUR 238,60
Moped fans like you also bought:
swiing® revival stud bolt M5 x 23 mm inlet (diaphragm) 10.9 | Sachs 50/2 (A3700)
Manufacturer: swiing® revival parts · Area of application: Standard · Material: Steel · Surface: blue galvanized · Diameter: 4.9 mm · Total length: 23 mm · Thread length: 6 mm · Thread length: 12 mm · Thread type: M5x0.8 (standard thread) · Pony spare part no.: A3700 · Sachs spare part no.: 0640 016 101 · Sachs spare part no.: 0640 016 102
EUR 2,05
Gasket set with oil seals Diaphragm version | Sachs 50/2
Area of application: Standard · Ø outlet inside: 28 mm · Hole spacing inlet: 31 mm · Hole spacing inlet: 67 - 31 mm · Number of components: 16 pcs · Hole pattern [mm]: 60 x 40 · Pony spare part no.: A2548 · Sachs spare part no.: 0286 125 021
EUR 45,00
GPO ignition plate 6 / 12V CDI ignition
Ø inside: 18.5 mm · Manufacturer: GPO · Area of application: Performance · Area of application: Standard · Number of cables: 2 pcs · Material: Aluminum · Material: Copper · Material: Plastic · Material: Steel · Color: gray · Tension: 6 V · Tension: 12 V · Ø outside: 90 mm · Number of fixing points: 4 pcs · Cable length: 580 mm · Ø Internal flywheel: 90 mm · Ø bolt circle: 80 mm
EUR 101,30
swiing® revival pinion shaft | Sachs 50/2 manual (A1291)
Manufacturer: swiing® revival parts · Material: Steel · Surface: blank / oiled · Recording type: Ø15 x SW12 · Toothing type: straight toothed · Ø inside: 13 mm · Number of teeth: 4 pcs · Ø outside: 15.4 mm · Total length: 102.6 mm · Thread type: MF12x1 (fine pitch thread) · Pony spare part no.: A1291 · Sachs spare part no.: 0237 014 002
EUR 87,20
GPO piston 40.94 mm | Sachs 502, 50/2, 50/3, 50/4
Manufacturer: GPO · Ø outside piston (A): 40.94 mm · Compression height (C): 28 mm · Curvature (D): 3.2 mm · Total piston height (E): 49.4 mm · Number of piston rings (F): 2 pcs · Nominal diameter: 40 mm · Piston ring mold: Rectangular ring · Piston ring impact: Internal fuse (IS) · Ø piston pin (B): 12 mm · Piston ring height: 1.5 mm · Thick piston ring: 1.8 mm · Weight: 86 g
EUR 45,00
Collection only possible with online purchase and appointment.
