Complete CDI ignition for left-turning engines. Ignition is with light and has an operating voltage of 12V and 6 amps.
Connection of the supplied 6/12V voltage regulator:
The green cable from the ignition switch (black part on the base plate) goes directly to the ignition coil. Because the ignition is contactless, the ignition can of course only be adjusted with a strobe light and a mark for the desired ignition time must first be attached to the magnetic flywheel and motor housing. The light coil is at the bottom, the switchgear at the top.
The strobe lamp and other useful items can be found under accessories.
Good, inexpensive standard spare part. GPO – GOOD PARTS ONLY.
The set includes the following fixed parts:
Manufacturer: GPO · Material: Steel · Tension: 6 V, 12 V · Direction of rotation: left · Cone ratio: 1:5 · Ø Internal flywheel: 90.9 mm · Ø Flywheel outside: 116.5 mm · Thread type: MF26x1.5 (fine pitch thread) · Weight: 900 g
Manufacturer: CEAB · Material: Plastic · Tension: 12 V · Type of current: Alternating current (AC) · Mounting type: Screws · Ø mounting hole: 6 mm
Manufacturer: GPO · Material: Aluminum, Copper, Plastic, Steel · Tension: 6 V, 12 V · Number of cables: 2 pcs · Cable length: 580 mm · Ø inside: 18.5 mm · Ø Internal flywheel: 90 mm · Ø outside: 90 mm · Number of fixing points: 4 pcs · Ø bolt circle: 80 mm · Area of application: Standard, Performance
Manufacturer: GPO · Color: black · Ø cable holder: 7 mm · Total length: 560 mm · Number of fixing points: 2 pcs · Hole spacing: 80 mm · Area of application: Standard
Details
Manufacturer | GPO |
Tension | 12 V |
Direction of rotation | left |
Ø mounting plate | 90 mm |
Ø Internal flywheel | 90 mm |
Mounting type | Screws |
Number of fixing points | 2 pcs |
Area of application | Standard, Performance |
Suitable for the following models
Puch | ZA50 (air-cooled) ZA50 (fan-cooled) Z50 (X30 Sport) Z50 (X30 Velux) 2-speed MS, MV, MV50 3-speed VSD, DS, VZ, MC |
Sachs | 50 (Fahrtwind, 1.25 / 1.5 hp, DE) 502 (Saxonette) - AL, AML 50/2 - L CH (0.8 PS), ML CH (0.8 PS), MB (2.6 PS), MLB (2.6 PS) 50/3 50/4 - MLFB (2.6 PS), LKH (4.5 PS) 50/5 503 - AAL, ABL, 2AL / 2BL, AB, AC, ADV 505 (with pedal shaft) - 1A (AT), 2A (HG) 535 |
Zündapp Belmondo |
Accessories & related products
VEC electronic ignition coil (replaces ignition coil, capacitor & contact breaker)
Ø mounting hole: 4.6 mm · Manufacturer: VEC · Color: black · Ø Internal flywheel: 90 mm · Place of use: Internal (in the ignition) · Ø cable holder: 5 mm · Total length: 77 mm · Height: 48 mm · Cable length: 140 mm · Cable length: 420 mm · Mounting type: Screws · Area of application: Original · Area of application: Performance · Area of application: Standard · Number of fixing points: 2 pcs · Hole spacing: 54 mm
EUR 115,30
Not in stock
GPO ignition set CDI anticlockwise 12 V
Manufacturer: GPO · Mounting type: Screws · Number of fixing points: 4 pcs · Material: Aluminum · Ø Internal flywheel: 90 mm · Area of application: Original · Area of application: Standard · Tension: 12 V · Performance: 17 W · Direction of rotation: left · Ø mounting plate: 90 mm
EUR 242,40
Moped fans like you also bought:
Wippermann drive chain No.18 (double reinforced)
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Manufacturer: Wippermann · Material: Steel · Color: gray · Surface: blank / oiled · Number of chain links: 114 pcs · Rolling circumference: 1448 mm · Chain lock type: Spring lock · Ø bore: 4.2 mm · Ø Pin: 4.15 mm
EUR 39,10
GPO ignition plate 6 / 12V CDI ignition
Manufacturer: GPO · Material: Aluminum · Material: Copper · Material: Plastic · Material: Steel · Tension: 6 V · Tension: 12 V · Number of cables: 2 pcs · Cable length: 580 mm · Ø inside: 18.5 mm · Ø Internal flywheel: 90 mm · Ø outside: 90 mm · Number of fixing points: 4 pcs · Ø bolt circle: 80 mm · Area of application: Performance · Area of application: Standard
EUR 103,80