Front wheel hub made of cast aluminum suitable for original cast rims of Puch Maxi (S / N), Puch Supermaxi (LG1 / LG2) and Puch X30 NG-2AH mopeds / mopeds.
The corresponding wheel bearings are already pressed into the cast hub.
Ø Drum: 80 mm
A matching wheel axle and other wheel hubs can be found in the accessories section.
Good, inexpensive standard spare part. GPO – GOOD PARTS ONLY.
Details
| Manufacturer | GPO |
| Ø axle | 12 mm |
| Material | Cast aluminum |
| Ø drum | 80 mm |
| Color | silver |
| Ø Receptacle | 92 mm |
| Thread type | M8x1.25 (standard thread) |
| Ø bolt circle | 106 mm |
| Width | 54.5 mm |
| Ø outside | 118 mm |
| Thread length | 14 mm |
| Number of fixing points | 5 pcs |
| Wheel size [inch] | 17 " |
Suitable for the following models
| Puch |
Accessories & related products
Wheel axle set M12x1 x 165 mm front
Manufacturer: Quenching · Material: Steel · Surface: blue galvanized · Surface: burnished · Thread type: MF12x1 (fine pitch thread) · Total length: 165 mm · Width: 7 mm · Width: 10.2 mm · Width: 32 mm · Height: 9.9 mm · Ø outside: 17.4 mm · Width across flats SW: 19 mm · Ø outside: 19.9 mm · Thread length: 25 mm · Thread length: 26 mm · Ø inside: 12.6 mm · Ø inside: 13.2 mm · Ø shaft: 11.9 mm · Shank length: 114 mm
EUR 16,60
GPO sprocket 45 teeth chrome | Puch Maxi, X30 NG-2AH
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Manufacturer: GPO · Material: Steel · Surface: chrome-plated · Color: silver · Number of teeth: 45 pcs · Ø bolt circle: 106 mm · Cranking (offset): 8 mm · Ø inside: 94 mm · Number of fixing points: 6 pcs · Hole spacing 2: 68 mm · Hole spacing: 36.5 mm · Ø mounting hole: 6.7 mm
EUR 41,60
Cast wheel hub | Puch Maxi, X30 NG-2AH
Ø inside: 27.9 mm · Material: Cast aluminum · Area of application: Tuning · Ø drum: 80 mm · Surface: blank · Surface: raw · Color: silver · Ø axle: 12 mm · Ø outside: 114.7 mm · Number of fixing points: 12 pcs · Ø mounting hole: 6.1 mm · Thread type: FG34.8 (1.37" 24G) · Total length: 105 mm · Thread length: 12 mm · Ø bolt circle: 105 mm
EUR 101,30
GPO bolt set wheel hub cast iron black (strength 12.9) | Puch
Manufacturer: GPO · Material: Steel · Surface: burnished · Color: black · Drive: Hexagon socket · Screw head: Cylinder head · Width across flats SW: 6 mm · Strength class: 12.9 · Thread type: M8x1.25 (standard thread) · Thread length: 25 mm · Number of components: 5 pcs
EUR 8,90
swiing® revival wheel axle set M12x1 x 165 mm cast & spoke hubs | Puch
Manufacturer: swiing® revival parts · Material: Steel · Surface: blue galvanized · Diameter: 12 mm · Thread type: MF12x1 (fine pitch thread) · Total length: 165 mm · Width across flats SW: 19 mm · Thread length: 40 mm · Thread length: 50 mm · Ø shaft: 11.95 mm · Shank length: 75 mm
EUR 33,70
Not in stock
Moped fans like you also bought:
Wheel axle set M12x1 x 165 mm front
Manufacturer: Quenching · Material: Steel · Surface: blue galvanized · Surface: burnished · Thread type: MF12x1 (fine pitch thread) · Total length: 165 mm · Width: 7 mm · Width: 10.2 mm · Width: 32 mm · Height: 9.9 mm · Ø outside: 17.4 mm · Width across flats SW: 19 mm · Ø outside: 19.9 mm · Thread length: 25 mm · Thread length: 26 mm · Ø inside: 12.6 mm · Ø inside: 13.2 mm · Ø shaft: 11.9 mm · Shank length: 114 mm
EUR 16,60
swiing® revival wheel axle set M12x1 x 185 cast rear wheel galvanized | Puch
Manufacturer: swiing® revival parts · Material: Steel · Surface: blue galvanized · Ø outside: 11.8 mm · Width across flats SW: 19 mm · Ø shaft: 11.9 mm · Shank length: 100 mm · Thread type: MF12x1 (fine pitch thread) · Total length: 185 mm · Thread length: 26 mm · Thread length: 52.5 mm
EUR 16,80
Cast wheel hub | Puch Maxi, X30 NG-2AH
Ø inside: 27.9 mm · Material: Cast aluminum · Area of application: Tuning · Ø drum: 80 mm · Surface: blank · Surface: raw · Color: silver · Ø axle: 12 mm · Ø outside: 114.7 mm · Number of fixing points: 12 pcs · Ø mounting hole: 6.1 mm · Thread type: FG34.8 (1.37" 24G) · Total length: 105 mm · Thread length: 12 mm · Ø bolt circle: 105 mm
EUR 101,30
swiing® revival wheel axle set M12x1 x 165 mm cast & spoke hubs | Puch
Manufacturer: swiing® revival parts · Material: Steel · Surface: blue galvanized · Diameter: 12 mm · Thread type: MF12x1 (fine pitch thread) · Total length: 165 mm · Width across flats SW: 19 mm · Thread length: 40 mm · Thread length: 50 mm · Ø shaft: 11.95 mm · Shank length: 75 mm
EUR 33,70
Not in stock
Collection only possible with online purchase and appointment.
