Complete gasket set with oil seals for Sachs mopeds / mopeds with 502 engines and diaphragm cylinders.
The gasket set fits engines with a pinion shaft of 15 mm and a key width as a pinion mount.
The oil seals are 2 pcs. 15/30/7 B-DUO (#18160) and 1 pc. 14.96/31.5/3.5 (#12128).
Sealant and alternative revision sets can be found in the accessories section.
Details
| Number of components | 16 pcs |
| Hole spacing inlet | 31 mm, 67 - 31 mm |
| Ø outlet inside | 28 mm |
| Hole pattern [mm] | 60 x 40 |
| Area of application | Standard |
| Pony spare part no. | A2548 |
| Sachs spare part no. | 0286 125 021 |
Suitable for the following models
| Sachs | 502 (Saxonette) - AML 50/2 - ML CH (0.8 PS), MB (2.6 PS), MLB (2.6 PS) |
Accessories & related products
GPO gasket set with oil seals slotted version | Sachs 50/2 engine
Manufacturer: GPO · Area of application: Standard · Hole spacing inlet: 31 mm · Ø outlet inside: 28 mm · Hole pattern [mm]: 60 x 40 · Number of components: 14 pcs · Pony spare part no.: A2582 · Sachs spare part no.: 0286 156 001
EUR 45,00
Elring Dirko HT sealing compound gray (silicone) 70 ml permanently elastic up to 315°C
Manufacturer: Elring · Material: Silicone · Contents [ml]: 70 ml · Area of application: Chemistry · Color: gray · Hazard warning: Causes damage to organs through prolonged or repeated exposure · Temperature resistance (min.): -60 - 315 °C · Gap dimension (max.): 2 mm
EUR 22,40
EUR 320,00/l
Moped fans like you also bought:
NSK E15 shoulder ball bearing 15/35/8 (A1149)
Manufacturer: NSK · Bearing type: Shoulder bearing · Inner ring width: 8 mm · Bearing clearance: CN (standard) · Bearing cage: Brass cage ball-guided · Groove ring: No · Material: Brass · Material: Steel · Surface: blank · Area of application: Standard · Ø inside: 15 mm · Ø outside: 35 mm · Stock number: E15 · Width: 8 mm · Ball bearing closed: No · Pony spare part no.: A1149 · Sachs spare part no.: 0232 017 006
EUR 28,10
Flat nut M21x1 LH clutch | Sachs 50/2, 503 AB/ABL/2AL/2BL (A1504)
Nut type: Hexagon flat nut · Thread type: MF21x1 LH (fine/left-hand thread) · Drive: External hexagon · Width across flats SW: 26 mm · Pony spare part no.: A1504 · Sachs spare part no.: 0242 030 005 · Sachs spare part no.: 0242 030 105
EUR 8,45
swiing® revival clutch plates (2 pcs.) | Sachs 50/2, 503 2AL/2BL (A3887)
Manufacturer: swiing® revival parts · Material: Composite materials · Material: Steel · Recording type: Interlocking · Ø inside: 29.7 mm · Ø inside: 36 mm · Ø outside: 93.7 mm · Number of slats: 2 pcs · Thickness: 3.3 mm · Area of application: Standard · Pony spare part no.: A3887 · Sachs spare part no.: 0659 010 006
EUR 29,60
swiing® revival ball bearing countershaft | Sachs 50/2, 50/3, 50/4, 503 2AL/2BL (A2531)
Bearing cage: "-" Sheet steel cage ball-guided · Stock number: E15 · Inner ring width: 25.6 mm · Manufacturer: swiing® revival parts · Bearing clearance: CN (standard) · Area of application: High End · Area of application: Standard · Material: Steel · Bearing type: Deep groove ball bearing · Ø inside: 15 mm · Thread type: MF20.8x1 LH (fine/left-hand thread) · Width: 8 mm · Ø outside: 35 mm · Pony spare part no.: A2531 · Sachs spare part no.: 0286 079 105
EUR 56,20
Collection only possible with online purchase and appointment.
