Cylinder head for mopeds / mopeds with windage Sachs 50, 502 & 50/2 engines with decompression connection.
New from 40-year old stock. May therefore show slight signs of storage, but these do not impair functionality in any way.
The cooling fins have a larger outer diameter than the traditional blown Swiss models.
Ø outer ribs: 105 mm
Combustion chamber layout: 7:1
In order to be able to fit the cylinder to a Sachs 50/2 CH engine with blower, adaptation work must be carried out.
NOS – New from old stock.
Original Sachs spare part number: A1064 / 0213 103 099 / 0213 103 005
Details
| Manufacturer | Sachs |
| Ø outside | 105 mm |
| Area of application | Original |
| Number of fixing points | 4 pcs |
Suitable for the following models
| Sachs | 50/3 50/4 - MLFB (2.6 PS), LKH (4.5 PS) |
Accessories & related products
swiing® revival Silentblock Ø 19.3 x 19 mm | Sachs 50/2 (A1940)
Ø inside: 8.5 mm · Ø outside: 19.3 mm · Total length: 19 mm · Manufacturer: swiing® revival parts · Waistband height: 1.5 mm · Color: black · Ø Bundle: 13 mm · Ø Bundle: 15 mm · Material: Rubber · Material: Steel · Surface: raw · Area of application: Standard · Pony OEM number: A1940 · Sachs OEM number: 0260 101 000
EUR 8,10
swiing® revival screw set cylinder head Inox | Sachs 503 / 50/2 / 50/3 / 50/4
Manufacturer: swiing® revival parts · Material: Chrome steel (stainless steel) · Thread type: M6x1 (standard thread) · Total length: 34 mm · Drive: External hexagon · Screw head: Hexagon · Width across flats SW: 10 mm · Thread length: 22 mm · Shank: Yes · Ø shaft: 5.85 mm · Number of components: 12 pcs · Shank length: 8 mm · Area of application: Standard
EUR 8,70
Cylinder 38 mm diaphragm 2 lugs NOS | Sachs Saxonette
Nominal diameter: 41 mm · Manufacturer: Sachs · Material: Gray cast iron · Surface: raw · Displacement: 50 ccm · Crankshaft stroke: 42 mm · Ø cylinder neck: 43.8 mm · Ø outlet inside: 26.3 mm · Number of fixing points: 4 pcs · Inlet window: 56 x 18 · Thread inlet: M5x0.8 (standard thread) · Hole pattern [mm]: 51 x 40 mm / 37 x 37 mm · Hole spacing inlet: 67 mm · Outlet type: Union nut · Thread outlet: M35x2 (standard thread) · Area of application: Original · Decompressor: No
EUR 339,80
Moped fans like you also bought:
swiing® ingenious clutch springs reinforced (+20%) (Version 2.0) | Puch E50
Spring design: Pressure spring · Material: Spring steel · Surface: coated · Manufacturer: swiing® ingenious parts · Ø wire: 1.7 mm · Number of components: 3 pcs · Ø outside: 8.3 mm · Ø inside: 4.8 mm · Total length: 28 mm · Color: blue · Area of application: Tuning
EUR 21,00
Clutch basket 21 teeth needle bearing lightened | Puch E50
Material: Steel · Color: graphite colors · Recording type: Interlocking · Toothing type: helical toothed · Number of teeth: 21 pcs · Ø Receptacle: 30.5 mm · Ø inside: 15 mm · Ø outside: 99.6 mm · Height: 49.5 mm · Area of application: Tuning
EUR 146,40
Not in stock
swiing® revival thrust washer set Ø 15 / 17 mm | Puch E50
Manufacturer: swiing® revival parts · Material: Steel · Surface: hardened & ground · Area of application: Standard · Ø inside: 15 mm · Ø inside: 17 mm · Ø outside: 22 mm · Ø outside: 24 mm · Thickness: 1.1 mm · Thickness: 1.3 mm · Thickness: 1.5 mm · Thickness: 1.7 mm
EUR 45,40
GPO rear light with black base
Manufacturer: GPO · Material: Aluminum · Material: Plastic · Test mark: none · Tension: 6 V · Color: black · Color: red · Bulb holder: E10 · Width: 64 mm · Depth: 65 mm · Height: 110 mm · Battery operated: No · Mounting type: Nuts & bolts · Number of fixing points: 2 pcs
EUR 57,30
Collection only possible with online purchase and appointment.
